• 한국가구학회지
• /
• 제21권5호
• /
• pp.354-366
• /
• 2010

The modern unique woodworking furniture has been made in earnest from 50 years ago. Some oil from nut such as soybean, walnut and perilla, which is usually used in our common life, has been used as finishing material for the unique woodworking furniture. Recently, woodworking studio business among the whole furniture industry has grown gradually and many woodworkers uses various kinds of imported wood finishing oil. Many woodworkers use the imported finishing oil in the old ways instead of understanding the characters of the various kind of oil and It causes some serious problems in furniture finishing process. Therefore, this study aims at taking theoretical approach in wood finishing oil and presenting correct usage in understanding the types and characters of oil. Resultingly the new method of oil finishing for wood is suggested and this suggestion is to guide woodworkers into the right usage of wood finishing oil.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.26-34
• /
• 2008

Wool fabric having high moisture content were treated with fluorocarbon-based water and oil repellent finishing agents by pad-dry-cure system. Three types of finishing agents which were regular-type or nano-type were adapted to compare the surface chemical composition, water and oil repellent property, crease recovery angle, and durability to repeated laundering. From the surface chemical compositions resulted by ESCA and C1s curve-fitting, it was shown that the regular-type finishing agent were easily taken off from the finished wool fabrics after repeated laundering. On the other hand, the fluoroalkyl groups of nano-type finishing agents turned round from fabric surface to fiber internal after repeated laundering. The water repellency of the wool fabrics treated with regular-type agent had a little changes according to the treatment condition changes and sharply decreased with repeated laundering. However, these values when treated with nano-type agents increased with the concentration and cure temperature and were maintained after 20 times laundering. The wool fabrics treated with nano-type agent had a great oil repellency irrespective of treatment conditions. Furthermore, the wrinkle recovery values of the wool fabrics treated with nano-type agents were higher than those of the fabrics treated with regular-type agent and were unchanged after 20 times laundering.

• 한국염색가공학회지
• /
• 제5권2호
• /
• pp.125-133
• /
• 1993

This study was to investigate the application of foam finishing technology (FFT) for the silicone finishing of cotton fabrics and the tluorochemical finishing of polyester fabrics. The repellency properties, soil resistance properties and selected physical properties were demonstrated and compared the foam finishing with the conventional padding application. Amino-funetional silicone prorided better durability than epoxy-functional silicone and conventional reactive silicone after three launderings. Foam finishing fabrics improved stiffness but showed lower or equivalent water and oil repellency properties, soil resistance properties, tearing strength and abrasion resistance than those of the fabrics treated by conventional padding process. But, it was evident that the foam application of silicone and fluorochemical finishes to the fabrics were feasible.

• 한국응용과학기술학회지
• /
• 제15권1호
• /
• pp.1-7
• /
• 1998

Lubricating softner(SOS-2) for permanent press(PP) finish was prepared by blending water, beef tallow hardened oil for improving softness, and the emulsion which was synthesized from N-hexadecanoyl-N,N'-bis(2-hexadecamidoethyl)amine as a softening component and silicone oil KF-96 as a lubricating component. The prepared SOS-2 and the PP finishing resin were applied to PP finishing cotton broad cloth and P/C gingham samples using one bath method. The properties such as tear strength, crease recovery, bending resistance test were tested. The samples treated with SOS-2 and PP finishing resin have improved properties, compared with nontreated samples, those treated only with PP finishing resin, those treated with commercial PP finishing softners and PP finishing resin.

• 한국염색가공학회지
• /
• 제10권1호
• /
• pp.33-37
• /
• 1998

It is rather important in the water and oil repellent finishing for wool fabric what kind of water-repellent agents will be used. In many cases, Fluorocarbon-based water-repellent agents(eg.Oleophobol-S), the surface tensions of which very low, were recom-mended on account of good water and oil repellencies. In repellent finishing, fabrics were padded in a bath which contained aqueous solution of water-repellent agents, and wetting agents, followed by drying and curing. The most suitable treating condition for excellent repellency was as follows Fabrics were padded at liquor pick-up ratio of 50%, with aqueous solution which contained $30g/\ell$ of water-repellent agents, and $40g/\ell$ of wetting agents. And the padded fabrics were dried at $110^\circ{C}$ for 1 minute, and cured at $160^\circ{C}$ for 2 minutes. For the fabrics, water and oil repellencies and durability to repeated dry-cleanings are observed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.198-201
• /
• 2002

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, a slurry circulation system was designed and manufactured. Its finishing characteristics was experimently investigated by various effective factors such as dry, water flow, oil flow with a slurry. From the experimental results, it was found that the materal removal and surface roughness were good in oil flow with slurry. The slurry circulation system is effective on the internal finishing of non-ferromagnetic pipe(SUS304).

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권12호
• /
• pp.1676-1685
• /
• 2009

This trial was conducted to determine the effects of various feed additives on nutrient digestibility, performance and carcass traits of growing-finishing pigs fed diets containing wheat distiller' grains with solubles (WDGS). Seventy-two, individually fed pigs (19.7${\pm}$2.6 kg), were assigned to one of six dietary treatments in a 6${\times}$2 (treatment${\times}$sex) factorial design (N = 12). The control diet was based on wheat and soybean meal while the five experimental diets contained 20% WDGS during the growing period and 12% WDGS during the finishing period. One 20% WDGS diet was unsupplemented while the remaining diets were supplemented with either 0.1% threonine, 5% canola oil, 0.2% enzyme (0.1% Endofeed W containing 1,250 units/g of xylanase and 385 units/g of $\beta$-glucanase and 0.1% Vegpro containing 7,700 HUT/g protease and 75 CMC/g cellulase), or a combination of the three additives at the same levels as those fed separately. The digestibility of dry matter, crude protein and energy were all significantly higher in the control diet than the unsupplemented diet containing 20% WDGS. None of the feed additives improved nutrient digestibility. In addition, none of the additives had any significant effect on gain or feed intake during the growing (19.7 to 43.6) or finishing (43.6 to 114.3 kg) periods or overall (19.7 to 114.3 kg). During the growing period, feed conversion was significantly improved for pigs fed the combination of additives compared with the unsupplemented WDGS diet. During the finishing period and overall, feed conversion was significantly improved for pigs fed 5% canola oil alone or in combination with the other additives. None of the supplements had any effect on carcass traits. These results indicate that WDGS can be successfully used as a partial replacement for soybean meal in diets fed to growingfinishing pigs. However, due to its low energy content, there may be some merit in including high energy ingredients such as canola oil when diets containing WDGS are fed.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.29-34
• /
• 1995

Silicone softner(SSN-3) for permanent press(PP) finish was prepared by blending beef tallow hardened oil for Improving softness, water, the emulsion, which was synthesized from pentaerythritol monostearate as a softening component and silicone oil KF-96 as a lubricating component. The prepared SSN-3 and the PP finishing resin were applied to PP finishing cotton broad cloth and P/C gingham samples using one bath method. The properties such as crease recovery, tear strength, bending resistance test were tested. The samples treated with SSN-3 and PP finishing resin have improved properties, compared with nontreated samples, those treated only with PP finishing resin, those treated with commercial PP finishing softners and PP finishing resin. Also from the bending resistance test, the two kinds of fabric samples treated with SSN-3 of 3% showed grade 5 and these were good enough in feeling.

• 한국응용과학기술학회지
• /
• 제19권2호
• /
• pp.117-122
• /
• 2002

A silicone softner (SS-5), a permanent press (PP) finish, was prepared by blending silicone oil KF-96 (as a lubricating component) and beef tallow hardened oil (as a softening component) which was synthesized from fatty polyamide salts. The prepared SS-5 and the PP finishing resin were applied to PP finishing cotton cloth and P/C gingham sample by one-bath method. The properties such as crease recovery, tear strength, and bending resistance were tested. The samples treated with SS-5 and PP finishing resin showed improved properties when comparing with the untreated ones, with the ones treated only with PP finishing resin, with ones treated with commercial PP finishing softners and PP finishing resin. The grades of fabric samples treated with 3% SS-5 were fifth grade in the bending resistance test.

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.191-196
• /
• 2004

An emulsion of octadecamidoethylaminoethyl dodecate (which provides softness) and an emulsion silicone oil KF-96 (which provides lubricity) were separately synthesized. Then PP finishing softeners (SSA-7) was prepared by blending of the synthesized emulsions with beef tallow hardened oil (a softness improving agent). PP finishing treatment was carried out with the prepared SSA-7 and PP finishing resin by a one bath method, and several physical properties were tested. As a result, crease recovery, tear strength, softness, lubricity, and bending resistance were all good, indicating that the prepared SSA-7 is a good PP finishing softener.