• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권1호
• /
• pp.50-56
• /
• 2010

Oil contamination soil has been one of the most environmental social issues for decades in the inside and outside of country. The law of soil environmental preservation was carried out in the 1990s and the government controlled not only soil environment management and the remediation of contaminated soil but also promoted the development of remedial technology and cleanup business of contaminated soil by national policy. In addition to agriculture areas, the main oil contaminated sites are a gas station, oil reservoir, petro-chemical complex, site of railway carriage base and military camp. The contamination-frequency of agriculture area and effect sites are low but it has significantly important area on account of producing food for human beings. Therefore, we should be concerned about oil contamination damage of agriculture area. The oil contamination damage of agriculture area influenced drop of birth and breeding since the oil directly adheres to seeds and farm products even diffusion of contaminated soil to cultivation area. The studies of the crops and the food vegetation has not enough detailed data caused by the incident of oil contamination. This study investigated the effect of oil in germination and growth of selected plant seeds. In this study, we try to verify whether the oil contamination by accidents on farmland influenced the damage of farm produce and the mutual relation both oil contaminated soil or the vegetation of crops. The impact of oil on plant development was followed by phytotoxicity assessments. The plants exhibited visual symptoms of stress, growth reduction and perturbations in developmental parameters. The increase of the degree of pollution induced more marked effects in plants, likely because of the physical effects of oil. The relationships between the phytotoxicity contents of plants and growth reduction suggest a chemical toxicity of fuel oil. In addition, while cleaned up the contaminated soil under the standard of contaminated soil we examined it was suitable for region standard and it may have practical possibility for fill material of construction of afforestation and molding soil of landfill.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.623-627
• /
• 2014

에멀젼은 섞이지 않은 두 물질을 분산시스템으로 혼합시켜 놓은 것이다. 에멀젼의 점도에 영향을 미치는 인자는 유화입자 크기, 연속상 및 분산상 종류, 연속상과 분산상의 비, 유화제 종류 및 유화기기 등 다양한 요소들이 있다. 본 연구에서는 오일 극성도에 따라 에멀젼의 점도 변화를 관찰하였고 이를 유기개념도를 이용하여 해석하였다. 탄화수소계, 에스테르계 및 실리콘계 오일을 사용하여 에멀젼을 제조하여 점도를 측정하였다. 오일 극성도가 높을수록 계면에 위치하는 유화제 및 유화안정제의 양이 적어지기 때문에 점도는 감소하였다. 극성 오일간 극성도를 수치적으로 비교하기 위해 유기개념도 이용하였으며 유기개념도상의 해석과 에멀젼의 점도 측정 결과가 실리콘 오일을 제외하고는 모두 일치하였다.

• 멤브레인
• /
• 제6권4호
• /
• pp.219-226
• /
• 1996

본 연구에서는 2축 회전판형 한외여과막 모듈의 순수투과율 예측모델과 1% 절삭유의 분리특성 및 투과율 예측모델을 유도하였다. 2축 RDM은 한외여과막(UOP사, 직경 0.22m)을 씌운 같은 크기의 회전판막 20개를 장착한 후 막간격과 각속도($\omega$)에 따른 분리특성을 조사하였다. 2축 RDM의 순수 투과율은 각속도가 41.89rad/s에서 9.95% 감소하여서 1축 RDM의 감소율 3.01%보다 높았다. 2축 RDM은 회전판막이 겹친 부분에서 난류의 발생으로 미끄럼 흐름에 의한 압력 강하는 $(2.5{\omega}r)^{2}$에 비례하였다. 회전판막 간격이 3mm인 $J/J_{o}$(절삭유의 투과율/순수 투과율)는 각속도가 31.42rad/s에서 2.62rad/s로 감소할 때 0.64에서 0.31로 감소하였고 간격이 7mm 일 때의 $J/J_{o}$는 0.64에서 0.27의 감소하여 비슷한 경향을 보였다. 1축 RDM에 사용된 투과율 예측모델식을 변형하여 유도된 2축 RDM의 모델식은 실험결과와 잘 일치하였다.

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.536-540
• /
• 2018

엔진의 성능이 향상될수록 엔진 내부에서 연소되는 연료의 양이 증가하고 그에 따라 엔진의 온도는 증가하게 된다. 특히 피스톤 헤드의 경우 냉각이 어려우므로 피스톤 헤드의 온도가 높아지게 된다. 그러나 피스톤 헤드의 온도가 너무 높게 되면 피스톤 헤드 표면에서 이상 연소가 발생하기 쉬워 토크 저하 및 엔진 파손과 같은 결과를 가져온다. 피스톤 헤드의 온도를 낮게 하기 위하여 오일을 피스톤 헤드 하단부로 분사하는 오일 제트가 사용되는데, 본 연구에서는 오일 제트에 의한 피스톤 헤드 냉각 효과를 확인하기 위하여 템플러그를 사용하여 엔진 작동시 피스톤 헤드의 온도를 측정하였다. 템플러그는 일종의 센서로 피스톤 헤드의 온도에 따라 템플러그의 경도가 변화하여 변화된 경도를 이용하여 피스톤 헤드의 온도를 측정한다. 템플러그를 사용하여 피스톤 헤드의 최고 온도를 오일 제트가 없는 상태와 설치된 상태에서 측정하였다. 오일 제트가 설치됨에 따라 피스톤 헤드의 온도는 변화되었다. 최고 온도 부위가 중앙부위에서 전후부위로 변경되었다. 또한 피스톤 헤드 내에서 온도 편차가 감소하여 좀 더 균일한 피스톤 헤드 온도 분포를 얻을 수 있었다.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.341-348
• /
• 2004

This study experimented dividing compaction load by dynamic compaction test and an oil pressure hammer compaction test for consolidation strength characteristics experimental feedback about soil change aspect of waste landfill ground and revelation of compaction effect as underground research about consolidation behavior of waste landfill ground by compaction load, foot weight and percussion number of times were adapted differently each other with uniformity drop head when dynamic compaction test, and hammer scale and percussion number of times were adapted differently also when oil pressure hammer compaction test.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권4호
• /
• pp.67-77
• /
• 1986

The information on the heat transfer characteristics, flow pattern and pressure drop, are very important for the desing of general heat exchanger, refrigerating system, air conditioning system and energy recovery system. In these systems, water or lubricating oil contained in working fluid affects greatly the flow and heat transfer condition and this phenomena must be considered in the practical design. An experiment has been performed for studying the flow and heat transfer characteristics of the forced convective horizontal flow of R-113 under the range of the liquid single phase state to the boiling flow state. Basic experimental results are obtained in the case that water or lubricating oil does not contaminate in the test fluid. Experimental results are as follows; (1) The local heat transfer coefficients in the nucleate boiling region and transition boiling region are almostly ten times as large as that of liquid single phase flow. (2) The measured heat transfer coefficient in the present experimental range is relatively agreed well with the predicted value from the various experimental results for the boiling flow.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1812-1817
• /
• 2008

A cooling system for microelectronics is becoming more important as its surface heat density is projected to reach that of the sun surface. The existing technologies using natural and forced convection are limited to solve the problems. Recently, an electrohydrodynamic driven flow is studied as one of the means to cope with this problems. A new method, utilizing a needle-centered nozzle electrode, has been proposed and investigated. The I-V characteristics of the nozzle electrode for deionized water and silicone oil were significantly different from that of without liquid, which might be due to the liquid drop covered on the nozzle tip by the EHD force acting near the needle tip. Results showed that the liquid pumping rate and flow efficiency of the nozzle electrode were very high, especially for the silicone oil. Theoretical analysis also showed the effectiveness of the needle electrode centered in the ceramic nozzle, which, however, can be a means as a liquid pump.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.50-55
• /
• 2017

This study is about the distributions of flow in an air conditioning duct used for marine and oil drilling ships. Three-dimensional steady state turbulence was assumed as a governing equation for describing the flow in the air conditioning duct in this study. We compared the flow field with the pressure distribution according to the inlet velocity for two types of air conditioning duct, and stress and safe factors were simulated using ANSYS W/B. The result of fluid analysis showed an increased pressure drop in the duct according to the inlet velocity. Furthermore, secondary flow and complicated flow characteristics occurred at the bellows zone.

• Journal of Plant Biotechnology
• /
• 제30권2호
• /
• pp.195-199
• /
• 2003

Extracts of Escherichia coli as a elicit were treated to suspension cultures of Streptanthus tostus in order to observe the effect on the pholem development. By the elicit treatment, cell wall, sieve endoplasmic reticulum (SER) and p-protein were normally synthesized, but the structure of amyloplast was changed from a round form to irregular and swollen unhalthy form with a tiny starch granular. Oil drops were new synthesized and accumulated in a large oleoplast and proteins were also accumulated in a single membrane. The concentration of sucrose in the phloem, which was induced during the elicit treatment, was higher than normally developed phloem cells. These results suggest that phloem cells might be changed in the normal cycles of metabolism of lipids, carbohydrates and proteins to overcome during the eilicit stress.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.869-874
• /
• 2003

The atomization characteristics were investigated through the influence of the change of GLR and the change of working fluid on droplet size distribution and mean diameter of drop produced by effervescent atomizer. For simultaneous injection of water and high viscous waste vegetable oil, effervescent atomizer with two aerator tubes was specially designed. From the experimental results, regardless of mass fraction of vegetable oil in working fluids, it is expected that effervescent atomizer will exhibit excellent atomization performance at the high GLR conditions.