• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.7
• /
• pp.982-992
• /
• 2011

Three experiments were carried out to determine the nutritional value and to verify the pig performance in growing and finishing phases (30 to 90 kg) fed on diets containing common corn (CC), high-lysine corn (HLC) and high-oil corn (HOC). In the total digestibility trial (Exp. I) 12 barrows were used. Values of digestible energy (DE) and metabolizable energy (ME) as-fed basis for CC, HLC and HOC, were: 3,396 and 3,275 kcal/kg; 3,248 and 3,139 kcal/kg; 3,445 and 3,308 kcal/kg, respectively. In order to determine the apparent and true ileal digestibility coefficients of amino acids, as well as the values of true digestible amino acids of the CC, HLC and HOC, an ileal digestibility trial was done (Exp. II) with T-cannulated barrows ("T" simple). The treatments consisted of three diets, with one of them as the sole source of protein (CC, HLC and HOC). In the performance experiment (Exp. III), 36 crossbred pigs, allotted in a completely randomized design with three treatments and 12 replications were used. Treatments consisted of three diets: 1 - CC; 2 - HLC and 3 - HOC. It was observed no difference for performance and carcass variables among the corns with different nutritional profiles. Results of the three experiments highlighted the importance of segregating corns in their real chemical and energetic composition as well as the values of true digestible amino acids for formulating diets for growing and finishing pigs.

• Preventive Nutrition and Food Science
• /
• v.17 no.4
• /
• pp.310-314
• /
• 2012

Thirty-two different volatile oils were identified from Allomyrina dichotoma (A. dichotoma) larvae by gas chromatography/mass spectrometry (GC/MS). The major volatile components were 2,2,4-trimethyl-3-carboxyisopropyl pentanoic acid isobutyl ester (5.83%), phenol,2,6-bis(a,a-dimethyl ethyl)-4-(1-methyl-1-phenylethyl) (5.72%), heptacosane (5.49%) and phenol,2,4-bis(1-methyl-1-phenylethyl) (5.47%). The composition of the fatty acids in A. dichotoma larvae was also determined by gas chromatography (GC) and fourteen constituents were identified. Oleic acid (19.13%) was the most abundant fatty acid followed by palmitic acid (12.52%), palmitoleic acid (3.71%) and linoleic acid (2.08%) in 100 g of A. dichotoma larvae on a dry weight basis. The quantity of unsaturated fatty acids (64.00%) were higher than that of saturated ones (36.00%). The predominant fatty acids in A. dichotoma consist of monounsaturated fatty acid (MUFA, 57.70%) such as oleic acid, myristoleic acid and palmitoleic acid, followed by saturated fatty acids (36.00%) and polyunsaturated fatty acids (PUFA, 6.50%). In particular, the presence of essential fatty acids, such as linoleic (5.30%) and linolenic acid (0.40%) give A. dichotoma larvae considerable nutritional and functional value and it may be a useful source for food and/or industrial utilization.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.4
• /
• pp.295-303
• /
• 1990

In this study, drought period when important agronomic characters of sesame plant is critical, was examined at different growth stages. Plant death by drought started at 40 days after drought in vegetative growth stage and 20 days, in reproductive growth stage. Obserbed by growth stage, drought damage in reproductive growth stage was more in jurious than vegetative growth stage. All the important agronomic characters was refreshed until 40 days and 20 days after drought in vegetative growth stage and reproductive growth stage respectively, but it could berefreshed after those times. Decrease rate of yield by drought ranged from 29 to 80% in vegetative growth stage and from 49 to 85% in respective growth stage. All the important agronomic characters except rate of ripeness showed positive association with grain yield under drought condition. Oil content in grain was decreaced by drought but composition of fatty acid was not affected by it.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.143-158
• /
• 2009

This experiment was carried out to examine ecological response and soybean quality as affected by environmental cultivation for producing high seed quality in domestic soybean variety. The results are as follows: Under equal cumulative temperature condition, soybean plants grown in Muju showed longer days to flowering, which was an effect of the long day-length on high latitudes, and longer duration of reproductive stage as a result of low temperature within that period. Considering apparent seed quality, 100 seed weight of soybeans grown in Muju was heavier than Miryang. Ratio of seed crack and disease-damaged seeds was lower in Muju, and these parameters decreases as planting was delayed. The protein contents did not show significant difference in terms of altitude and planting date, however, crude oil contents were higher in Miryang. An opposite trend was observed in C18:1 and C18:3. In the fatty acid composition, the proportion of C18:1 decreased as seeding date was delayed, and was higher in Miryang. Opposite observations were obtained from C18:3. The anthocyanin contents were highest on June 10 planting and higher in Muju than in Miryang. Isoflavone content was higher as seeding date was delayed and is similar accross seeding dates in Muju. As a summary, for high seed quality production the optimum planting date was June 10, and Muju was more suitable region than Miryang.

• Food Science of Animal Resources
• /
• v.38 no.2
• /
• pp.315-324
• /
• 2018

The objective of this study was to evaluate the efficacy of alkaline-treated sugarcane bagasse fiber on physicochemical and textural properties of meat emulsion with different fat levels. Crude sugarcane bagasse fiber (CSF) was treated with calcium hydroxide ($Ca(OH_2)$) to obtain alkaline-treated sugarcane bagasse fiber (ASF). The two types of sugarcane bagasse fiber (CSF and ASF) were incorporated at 2% levels in pork meat emulsions prepared with 5%, 10% and 20% fat levels. Alkaline-treatment markedly increased acid detergent fiber content (p=0.002), but significantly decreased protein, fat, ash and other carbohydrate contents. ASF exhibited significantly higher water-binding capacity, but lower oil-binding and emulsifying capacities than CSF. Meat emulsions formulated with 10% fat and 2% sugarcane bagasse fiber had equivalent cooking loss and textural properties to control meat emulsion (20% fat without sugarcane bagasse fiber). The two types of sugarcane bagasse fiber had similar impacts on proximate composition, cooking yield and texture of meat emulsion at the same fat level, respectively (p>0.05). Our results confirm that sugarcane bagasse fiber could be a functional food ingredient for improving physicochemical and textural properties of meat emulsion, at 2% addition level. Further, the altered functional properties of alkaline-treated sugarcane bagasse fiber had no impacts on physicochemical and textural properties of meat emulsions, regardless of fat level at 5%, 10% and 20%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.3
• /
• pp.282-293
• /
• 2012

This study aimed to show the chemical characteristics of $PM_{10}$ and $PM_{2.5}$ during Asian dust (AD) events and high PM episodes observed in Seoul. Time-resolved chemical composition of $PM_{10}$ or $PM_{2.5}$ was monitored in 1 hour interval using ambient ion monitor, semi-continuous carbon monitor, and on-line XRF spectrometer at Seoul intensive monitoring site in 2009. Considering that AD events were classified into three different cases according to the source area and pathway, the concentrations of ammonium-sulfate and trace metal components were relatively high when the AD were occurred in Gobi and inner-mongolia and transported across the Bohai bay. In addition, the influence of alkaline dust, which carried from saline land located in the northeastern China, was observed when the AD was originated from Gobi, inner-mongolia, and Manchuria. Except AD events, the high PM episodes observed in Seoul were impacted by various anthropogenic sources such as biomass burning, motor vehicle, oil combustion and road dust.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.3
• /
• pp.128-138
• /
• 2011

Objectives: It has been pointed out that there are problems in handling and managing chemicals due to trade secrets of Material Safety Data Sheet(MSDS). To date, some company intentionally leave out of several parts and use an inaccurate expression in MSDS. In particular, with the result of the inspection of the government and labour community, it is required that the 2nd section in MSDS included the composition and information on ingredients has to be provided with comprehensive expression to secure more reliability. Methods: Therefore, this study is aimed: 1) to recognize the current status of trade secrets of MSDS in workplaces with both domestic manufacturers of chemical products and multinational corporations; 2) to make contributions to prevention of the industrial accidents by providing the accurate information of MSDS; 3) to improve the risk communication system related with chemicals; 4) to impress workers on the importance of right of known for MSDS. With the result we analyzed the status of trade secrets in MSDS in 73 companies, such as petrochemistry production, paint production, metal processing oil production, detergent production, and international company related with chemicals, we have found that 38,150 (45.5%) have the trade secrets parts in the total number of 83,832 in MSDS. Also, based on the 288 MSDS gathered by the Occupational Safety and Health Research Institute (OSHRI) from 2005 to 2009, 41.7% of the MSDS are classified into the trade secrets. Conclusions: Therefore, to procure an assurance system of MSDS, we suggest that a MSDS picking up and checking system be legislated in the Occupational Safety and Health Act to protect workers from the unidentified chemical hazards due to the secret trade of MSDS.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.124-134
• /
• 2010

This study was performed to evaluate the efficiency of using softwood as the sawdust medium for Lentinula edodes cultivation, effect of nutrient on the mycelial growth, spawning, the mushroom yield, and quality. The nitrogen nutrition significantly enhanced the mycelial growth of L. edodes. The glutamic acid in the L. leptolepis and P. koraiensis, and asparagine in the P. densiflora were appeared to slight increase in the mycelial growth. The vegetable oil showed very effective on the mycelial growth in the P. koraiensis sawdust medium. Carbon/nitrogen ratio of all the test was reduced after mycelial growth. The mycelial growth was exclusively dependent on reduction of carbon. The mushroom yield (32.7%) of the P. densiflora sawdust medium (carbon source: 3% active carbon, nitrogen source: 0.4% asparagines) was the best in mushroom production of L. edodes, followed by the Q. variabilis sawdust (35.4%) of the control medium. The diameter of mushroom cap was obtained from the P. densiflora sawdust (carbon source: 3% sucrose, nitrogen source: 0.4% potassium nitrate) and P. koraiensis sawdust (carbon source: 3% sucrose, nitrogen source: 0.4% potassium nitrate), and the P. koraiensis sawdust (carbon source: 3% xylose, nitrogen source: 0.4% glutamic acid, supplement: 0.05% amino acid), with values 71.5 mm, 71.5 mm and 72.1 mm, respectively. In the polypropylene bag cultivation, the weight losses of the block medium gradually increased for 80 days in the dark (13.8~16.8%) and then became stable in the range of 20.7~25.8%.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.3
• /
• pp.217-226
• /
• 2020

An offshore plant is an offshore platform that can process oil and gas resources in rough seas with a poor working environment. Moreover, it is a complex structure with different types of offshore facilities and a large amount of outfitting that connects different offshore installations. In particular, an enormous amount of various piping materials is installed in a relatively narrow space, and thus, the difficulty of working is relatively high compared to working in ships or ground plants. Generally, when the 3D detailed design is completed, an offshore plant piping process is carried out at the shipyard with ISO 2D fabrication drawings and ISO 2D installation drawings. If a worker wants to understand the three-dimensional piping composition in the working area, he can only use three-dimensional viewers that provide limited functionality. As offshore plant construction progresses, correlating work with predecessors becomes more complicated and rework occurs because of frequent design changes. This viewer function makes it difficult to identify the 3D piping structure of the urgently needed part. This study deals with the process support method based on a system using a 3D simulator to improve the efficiency of the piping process. The 3D simulator is based on the Unity3D engine and can be simulated by considering the classification and priority of 3D models by the piping process in the system. Further, it makes it possible to visualize progress information of the process. In addition, the punch content can be displayed on the 3D model after the pipe inspection. Finally, in supporting the data in relation to the piping process, it is considered that 3D-simulator-supported piping installing could improve the work efficiency by more than 99% compared to the existing method.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.97-104
• /
• 2011

Modified C95600 bronze contains Fe component of 0.7 weight percentage besides Cu-7Al-2.5Si composition. The shape of centrifugal cast is a circular pipe with thick wall. Specimens machined from the centrifugal cast were quenched in oil after isothermal holding at a given heat treatment temperature in the range of $700{\sim}900^{\circ}C$. Mechanical properties and structural morphology are depended on the quenching heat treatment temperature regardless of isothermal holding time. Tensile strength or Brinell hardness is increased with increasing heat treatment temperature. The microstructure caused by quenching contains mixing phases of ${\alpha}+{\beta}'+FeSi+{\kappa}$ which martensite of ${\beta}'$ phase has been transformed from ${\beta}$ phase. Effect of isothermal holding temperature on mechanical properties in case of quenching heat treatment attributes to the change of volume fraction of ${\beta}'$ on the structural morphology. Mechanical characteristics of specimen, initially quenched from $850^{\circ}C$, and then tempered at $500^{\circ}C$, does not show an obvious softening indication, because disappearance of ${\beta}'$ during tempering process can be compensated by precipitation of brittle phase ${\gamma}$.