• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.497-504
• /
• 2008

This study was conducted for the optimization of ingredients in salad dressing using Bokbunja (Rubus coreanum Miquel) juice. The experiment was designed according to the D-optimal design of mixture design, which included 14 experimental points with 4 replicates for three independent variables (Bokbunja juice $15.70\sim47.10%$, oil $23.50\sim39.20%$, vinegar $3.90\sim19.60%$). The compositional and functional properties of the prepared products were measured, and these values were applied to the mathematical models. A canonical form and trace plot showed the influence of each variable on the quality attribute of final mixture product. By the use of F-test, viscosity, color values (L, a, and b), emulsion stability and sensory characteristics (color) were expressed by a linear model, while the color values (L) and sensory characteristics (smell, taste, and overall acceptance) were by a quadratic model. The optimum formulations by numerical and graphical method were analogous: Bokbunja juice, oil and vinegar of 36.02%, 26.48%, and 12.00% by numerical method, respectively; those of 36.00%, 26.44%, and 12.06% by graphical method, respectively.

• Clean Technology
• /
• v.10 no.2
• /
• pp.61-72
• /
• 2004

In this study, aqueous/semi-aqueous cleaning agents which consist of organic solvent, surfactant, cosurfactant, and water were developed by changing formulation parameters such as organic solvent type and contents, surfactant type and contents, and cosurfactant/surfactant(A/S) ratio, etc.. And physical properties and flux removal of the formulated cleaning agents have been evaluated. Also, the performance of oil-water separation from the rinse water contaminated during the cleaning process was evaluated for its recycling. The formulated cleaning agents in this work expected to have good penetration because of their low viscosity and low surface tension values of 30.2~32.5 dyne/cm. The flux removal with the terpene type cleaning agent was higher than that with hydrocarbon type cleaning agent and two commercial products (CPA(commercial product A), CPB(commercial product B)). And the performance of oil-water separation by gravity settling from the rinse water contaminated with formulated cleaning agent and soils was shown to be very good. The cleaning agents developed in this work were applied to surface mounting technology(SMT) cleaning process for manufacturing electronic parts at L electronic company. As a result, the newly developed cleaning agents showed two times better cleaning speed for removal of solder cream than the conventional ond containing ethanol and IPA(isopropyl alcohol). In addition, malodor and VOC problems generated by the previous organic cleaning agents have been solved in the manufacturing field through introduction of the non-volatile and environmental-friendly cleaning agents to the field.

• Korean Journal of Environmental Biology
• /
• v.34 no.3
• /
• pp.208-211
• /
• 2016

Essential oils (EOs) extracted from plants possess various biological activities and have been considered as natural insecticides due to their potent insecticidal activities. In regard to develop natural insecticides, EOs are formulated as an emulsifiable concentrate and their acute toxicity against to fishes were determined in a static condition using Cyprinus carpio. Coriander EO was used as an active ingredient mixed with ethanol for solvent and various surface active agents. The tested EOs were obtained from a commercial market, and three different extractions were also undertaken to produce EO using steam distillation, solvent extraction, and supercritical fluid extraction. Among the emulsifiable concentrate including a commercial coriander EO, surface active agents such as Tween 80, sodium dodecyl benzene sulfonate (SDBS), and mixture of SDBS and Nonidet showed acute toxicity to the fish. With the three different EO extraction, coriander EO obtained from supercritical fluids with Triton X-100 exhibited acute toxicity to C. carpio. Taken together, Tetgitol and Nondet are considered as surface active agents for the emulsifiable formulation of coriander EO.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.1
• /
• pp.53-62
• /
• 2004

The aim of this study was to predict the energy value and dynamic degradation of roughage in Taiwan using the $Daisy^{(R)}$. in vitro fermentation method to provide information on one of the very important nutrients for ration formulation. The second objective was to study the effects of Aspergillus oryzae (AFE) inclusion on nutrient utilization. Three ruminal fistulated dry dairy cows were used for rumen fluid and fifteen conventional forages used in dairy cattle were collected around this island. The degradability of these feedstuffs with and without AFE ($Amaferm^{(R)}$.) treatment was measured using the $Daisy^{(R)}$. in vitro method. The roughage energy values, including TDN and NEL, were calculated according to Robinson (2000). Results from the 30 h in vitro neutral detergent fiber (NDF) degradability and predicted energy evaluations showed that alfalfa (among the forages) contained the highest degradability and energy values, Bermuda straw having the lowest. Peanut vines and corn silage contained higher energy values and the lowest value found in Pangola and Napier grasses among the locally produced forages. Pangola and Napier grasses had lower values than most imported forages except Bermuda straw. Among the by-products, wheat middling contained the highest NDF degradability, while rice bran contained the richest energy value due to its high oil content. From the dynamic dry matter (DM), organic matter (OM), acid detergent fiber (ADF) and neutral detergent fiber (NDF) degradation, corn silage contained the highest effective degradation among the local forages; wheat middling (among the by-products) degraded the fastest in DM, OM, ADF and NDF and showed the highest effective degradability. AFE inclusion was inconsistent among the forages. Alfalfa hay showed significantly increased 30 h NDF degradability and energy values, Pangola hay, Napier grass and brewer's grains showed decreased degradability and energy values. AFE inclusion increased the DM, OM and NDF degradation rate in most forage, but only increased the DM degradation rate in sorghum distiller's grains, the OM degradation rate in bean curd pomace and the NDF and ADF degradation rates in soy pomace (among the by-products).

• The Korean Journal of Food And Nutrition
• /
• v.28 no.1
• /
• pp.153-159
• /
• 2015

This study was conducted to develop food for the elderly, which are well-shaped and easy to chew and swallow. The amounts of water and gelatin were adjusted to facilitate breaking down of the food with the tongue. In the aging society, it is necessary to support the development of a variety of products that can ease the intake functions of swallowing and chewing, while complementing with the essential nutrients supplements; such products can be actively commercialized in the elderly industry. Various types of food, for elderly with difficulties in chewing and swallowing, were used for sensory assessment. Sensory panel consisted of 10 dietitians (10 women) in nursing care facilities. The sensory optimal composite recipes were determined by central composite design (CCD). The sensory measurements were significantly different in the appearance (p<0.01), saltiness (p<0.01) and overall quality (p<0.01). The optimum formulation of pan fried flat fish, calculated by numerical and graphical method, was 8.54 g of salt and 6.34 g of olive oil. Moisture content, hardness, and adhesiveness of pan fried flat fish were 84.77%, 250, and -1.20, respectively. The result showed that easily chewable and swallowable pan fried flat fish for the elderly will have sufficient competitiveness, considering its safety, taste, and preference. This study may provide the basic materials for the development of easily chewable and swallowable foods for elderly.

• Journal of Korea Foresty Energy
• /
• v.23 no.1
• /
• pp.45-68
• /
• 2004

The word of lignin is derived from the Latin word 'ligum' meaning wood. Lignin is complex polymer consisting of coniferyl alcohol, sinapyl alcohol and p-coumaryl alcohol unit and has an amorphous, three dimensional network structure which is hard to be hydrolyzed by acid. Lignin is found in the cell wall of plants lignified. The mode of polymerization of these alcohols in the cell wall lead to a heterogeneous branched and cross-linked polymer in which phenyl propane units are linked by carbon-carbon and carbon-oxygen bonds. This polymerization of precursors, p-coumaryl alcohol, coniferyl alcohol and sinapyl alcohol to lignin is formed by enzymic dehydrolyzation. The reaction is initiated by an electron transfer which results in the formation of resonance-stabilized phenoxy radical. The combination of these radicals produces a variety of dimers, trimers and oligomers and so on. Lignin research has been divided into basic and practical application field. The basic studies contains biosynthesis, chemical structure, distribution in the cell wall and reactivity by reductants, oxidants and organic solvents. The application research will be approached the reaction of lignin in various pulp making involving pulp bleaching and its effect on pulp qualities. Lignin also will be studied for the production of fine chemicals, polymer products and the conservation into an energy source like petroleum oil because the amount of lignin produced in pulp making process is more than 51,000,000 tons per year in the world. Both basic and application research must lay emphasis on the development for the utilization of lignin and the pulping process. But these researches can not be completed without understanding lignin structure containing functional groups. Therefore, this paper was focused on the review of lignin formulation which has been studied since 1948 in chronological order. This review was based on monomers, dimers, trimers and tetramers of phenyl propane unit structures which were isolated and identified by different methods from various wood.ious wood.

• Computers and Concrete
• /
• v.20 no.6
• /
• pp.635-643
• /
• 2017

The rehabilitation and strengthening of concrete structures using Fiber-Reinforced Polymer (FRP) materials have been widely investigated. As a priority issue, however, the effect of curing conditions on the bonding behavior between FRP and concrete structures is still elusive. This study aims at developing a prediction model to accurately capture the mode-II interfacial debonding between FRP strips and concrete under different curing conditions. Single shear debonding experiments were conducted on FRP-concrete samples with respect to different curing time t and temperatures T. The J-integral formulation and constrained least square minimization are carried out to calibrate the parameters, i.e., the maximum slip $\bar{s}$ and stretch factor n. The prediction model is developed based on the cohesive model and Arrhenius relationship. The experimental data are then analyzed using the proposed model to predict the debonding between FRP and concrete, i.e., the interfacial shear stress-slip relationship. A Finite Element (FE) model is developed to validate the theoretical predictions. Satisfactory agreements are obtained. The prediction model can be used to accurately capture the bonding performance of FRP-concrete structures.

• Archives of Pharmacal Research
• /
• v.28 no.4
• /
• pp.502-508
• /
• 2005

Titrated extract of Centella asiatica (TECA) contains three principal ingredients, asiaticoside (AS), asiatic acid (AA), and madecassic acid (MA). These components are known to be clinically effective on systemic scleroderma, abnormal scar formation, and keloids. However, one problem associated with administration of TECA is its low solubility in aqueous as well as oil medium. In this study, various nonionic surfactants and bile salts as anionic surfactant were tested and screened for solubilizing TECA with a view to developing topical hydrogel type of ointment which is stable physicochemically, and has better pharmacological effects. When TECA was incorporated into various nonionic surfactant systems, labrasol had the most potent capacity for solubilizing TECA. In cases of bile salt systems, Na-deoxycholate (Na-DOC) had foremost solubilizing capacity, even more than labrasol. In differential scanning calorimetric study, the peaks of AA, MA, AS and Na-DOC disappeared at the coprecipitate of $1\%$ TECA and $1\%$ Na-DOC, suggesting the optimum condition of Na-DOC for solubilizing TECA. When the physicochemical stability of hydrogel containing this mixture was assessed, it was stable at room temperature for at least one month. Pharmacologically it significantly decreased the size of wound area at the $9^{th}$ day when applied to the wound area of rat dorsal skin. Taken together, solubility of TECA was dramatically improved by using non ionic and anionic surfactant systems, and Na-DOC was found to be the most effective solubilizer of TECA in formulating a TECA-containing hydrogel typed ointment. Moreover this gel was considered to be applicable to clinical use for wound healing effect.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.4
• /
• pp.381-388
• /
• 2018

Various characteristics of Opuntia humifusa (O. humifusa) extract solution obtained under low temperature and reduced pressure were examined and cosmetic essences using the extract solution as a humectant were prepared. The O. humifusa extract solution represented very small surface tension (25 mN/m) and contact angle ($8^{\circ}$), compared with other humectants such as glycerine and 1% hyaluronic acid solution. Also, the viscosity and stickiness of the extract solution were very low. The O. humifusa extract solution made it possible for a small amount of oil to be dispersed stably in water without any surfactant. Unlike other humectants, the viscosity and stickiness of cosmetic essences were reduced as the extract solution content in formulation increased. These results show that the O. humifusa extract solution obtained under low temperature and reduced pressure can be used as a natural humectant that provides moisturizing property and less sticky feeling.

• Journal of Ship and Ocean Technology
• /
• v.11 no.2
• /
• pp.10-25
• /
• 2007

With the sharp increase of the oil price, the issue of the energy saving requires even higher propulsive efficiency of the propellers. Traditionally the propellers have been designed with the criteria such as that of Lerbs optimum based on the lifting line theory and the empirical formulae of Lerbs and van Manen giving relations of the wake pitch with the wake non-uniformity. With the aid of the high speed computer, it is now possible to apply the time-consuming iterative approaches for the solution of the lifting surface problems. In this paper we formulate the variational problem to optimize the efficiency of the propeller operating in the given ship wake using the lifting surface method. The variational formulation relating the spanwise circulation distribution with the propulsive efficiency to be maximized is however non-linear in circulation distribution functions, thus the iterative method is applied to the quasi-linearized equations. The blade shape design also requires the iterative procedures, because the shape of the blade which is represented by the lifting surface is unknown a priori. The numerical code was validated with the DTNSRDC propeller 4119 which is well-known to be optimum in uniform inflow condition. In addition existing (well-designed) commercial propellers were selected and compared with the results of the open water tests and the self-propulsion tests.