• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.127-133
• /
• 2020

Most sewage treatment plants located offshore are discharged to the shore either directly or through rivers. Therefore, the water quality of the treated water discharged from the sewage treatment plant affects the water quality of the river water discharged to the river and the ocean. In this study, field surveys and numerical simulations were conducted to investigate the effect of treated water from the sewage treatment plant adjacent to the coastal environment. As a result of analyzing the water quality and sediment quality with the samples collected from the river and the estuary where the treated water was discharged to understand the impact on the coast, the treated water discharged from the sewage treatment plant was discharged to the river without exceeding the design criteria. However, the water quality discharged to the shore through estuaries was more contaminated than treated water. The cause of water quality deterioration of coastal effluent is due to the sedimentation of estuary temporarily by longshore sediment sransport which appeared around the estuary, the occurrence of estuary obstruction, and the increase of stagnant time in the estuary. As it was released and discharged, it was analyzed to affect the water quality, water quality and marine life around the estuary. Therefore, in the case of the east coast where the longshore sediment transport is strong, when planning the sewage treatment facility discharged to the ocean, it is necessary to closely examine the water quality change of the river water in the treated water such as the river mouth occlusion by the longshore sediment transport.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6A
• /
• pp.389-398
• /
• 2012

In this study, structural strain responses of the jacket-type Uldolmok tidal current power plant structure under severe tidal environments were measured and analyzed using long-term measurement system during construction and also operation. It was observed that there were significant changes in strain responses at the steps of jacket lifting, block loading, pile ejection and insertion. Strains due to dead loads and tidal loads were analyzed before and after removal of a jacket leg, and it was also found that the strains due to dead load were much significantly changed after jacket leg removal. From the measurement data during operation, it was found that strain responses were fluctuated with M2 and M4 tidal periods and also relatively short period of about 10 min due to the peculiar tidal characteristics in the Uldolmok strait. Finally, the neural network-based non-parametric estimation models were investigated to build up the signal-based structural damage monitoring system.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.899-908
• /
• 2021

It is expected that the global market for vessel repair and remodeling will grow up to the scale of about 25 billion dollars by 2023. Korea's shipbuilding industry is leading the world with its international competitiveness in design and production technology. The actual status of vessel repair industry, however, is poor as there are only two or three companies for vessel repair that can deal with large vessels in the area of Gyeongnam. The reason is that civil complaints are filed severely about environmental problems and environment-related regulations are so strict that it is fairly hard to get governmental approval for the operation of a vessel repair workplace. Domestic vessel repair companies mainly target small- and medium-sized vessels. There are only few workplaces that can carry out regular examination or repair work on large vessels such as LNG vessels, and due to the high price of vessel repair, most of the domestic repair work on large vessels including LNG vessels tends to be snatched by markets in Southeast Asia or China. Despite the tremendous domestic demand of Korea that has established the world's first shipbuilding industry and world's sixth biggest harbor infrastructure, its vessel repair industry can be said to be in very poor condition. In order to vitalize vessel repair industry, this study is aimed to analyze the environmental influence of vessel repair workplaces in Gyeongnam where vessel repair companies are concentrated and suggest standard processes by analyzing vessel repair processes precisely.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1055-1062
• /
• 2023

Globally, the need for remanufacturing or reusing ships and various mechanical parts continues to increase due to environmental problems including global warming. Research on remanufacturing is being carried out in many areas. However, research on inspection and classification to identify the performance or degree of wear of mechanical parts is insufficient. In particular, studies on the inspection-ability and classification-ability of mechanical parts equipped with various materials and complex forms are highly required. Remanufacturing must be considered from the stage of design to extend the life cycle of mechanical parts. Particularly, it is very important to perform research for evaluating the degree of ease to inspect and classify various sorts of wear or deterioration of parts caused by long-term use easily. In this study, the degree of ease in inspecting or classifying mechanical parts for remanufacturing is defined as inspection-ability and classification-ability. In fact, to remanufacture old parts, inspection-ability and classification-ability should be reflected from the stage of design. The purpose of this study is to evaluate the inspection-ability and classification-ability of ships and various mechanical parts. This researcher has presented the quantitative evaluation procedure of inspection-ability and classification-ability, derived the factors and ranges that influence each of the details of easiness, assigned scores according to the ranges of the factors, and calculated weights. Lastly, this study presents the procedure of scoring to evaluate the overall weights of inspection-ability and classification-ability and also inspection-ability and classification-ability quantitatively.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.3
• /
• pp.233-240
• /
• 2017

Subsea structures are always vulnerable to accidental risks induced by fishing gear, dropped objects, etc. This paper presents the design of a subsea manifold protective structure that protects against dropped object impacts. Probable dropped object scenarios were established considering the shapes and masses of the dropped objects. A design layout for the manifold protective structure was proposed, with detailed scantlings and material specifications. A method applicable to the pipelines specified in DNV-RP-F107(DNV, 2010) was applied to calculate the annual probabilities of dropped objects hitting the subsea manifold. Nonlinear finite element analyses provided the structural consequences due to the dropped object impacts such as the maximum deflections of the protective structure and the local fracture occurrences. A user-subroutine to implement the three-dimensional fracture strain surface was used to determine whether local fractures occur. The proposed protective structure was shown to withstand the dropped object impact loads in terms of the maximum deflections, even though local fractures could induce accelerated corrosion.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.345-350
• /
• 2014

A special usage impeller pump for ballast water treatment is part of an offshore plant's structure. It has to maintain a high corrosion resistance in an extreme environment, in which it can contact several kinds of aqueous solutions. The duplex stainless steel used in such severe environments is known to have corrosion resistance and excellent mechanical properties. This study estimated the performance of an impeller pump system designed using duplex stainless steel through a computational fluid dynamics analysis. As a result, it was determined that the pressure drop increases and the impeller performance is lowered if the equivalent roughness is enlarged. The surface precision of the duplex stainless steel must be consistently maintained. If thisis the case, it was determined that the existing STS steel can be substituted for the Duplex stainless steel.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.71-79
• /
• 2009

The world-wide ship construction market is forecast that the considerable portion of shipbuilding and oceanic plant industry will be transferred consequently in China after 5 or 10 years. This point of view where the Korean ship construction industry seizes the initiative from the world-wide ship construction/oceanic field, we must cultivate technical power of base technology, and focus our interests on the development of core parts. In this study, our proprietary remotely operated valve actuator system with power line technology was developed to enhance the installation and commissioning process by our own technology. This paper describes the new design and functions of the remotely operated valve system for shipbuilding and offshore market especially for FPSO.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.87-93
• /
• 2016

In this paper, we propose a new method to enhance an android security by exploiting a selective management of application permission. To that purpose, we analyze behavior of the current android security, via which we draw out possible vulnerabilities. After that, we develop a tool to implement the selective management of the application permission, witch has a function to give a permission selectively for the application when we install a new application. Via experiment we show validity of the developed tool in solving the drawn vulnerability in the current android security.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1408-1414
• /
• 2015

The renewable energies such as photovoltaic power, wind power and biomass have grown to a greater extent as decarbonization techniques. The renewable energies are interconnected to power systems (or electrical grids) in order to increase benefits from economies of scale, and the extra attention is focused on the Grid Code. A grid code defines technical parameters that power plants must meet to ensure functions of power systems, and the grid code determined by considering power system characteristics is various across the country. Some TSO (Transmission System Operator) and ISO (Independent System Operator) have issued grid code for wind power and the special requirements for offshore wind farm. The main purpose of the above grid code is that wind farm in power systems has to act as the existing power plants. Therefore wind farm developer and wind turbine manufacturer have great difficulty in grasping and meeting grid code requirements. This paper presents the basic understanding for grid codes of developed countries in the wind power and trends of those technical requirements. Moreover, in grid code viewpoint, the active power control of wind power is also discussed in details.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.408-414
• /
• 2014

After drilling operations at the offshore plant to production to crude oil to high pressure. After that time the low pressured of pipe inside when the secondary produce so oil recovery is reduced. At that time injection sea water at the pipe inside through water injection pump that the device Increase recovery so to be research and development at many industry. So developing 3-stage water injection pump at the domestic company. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic. In this paper, a 2D finite element analysis is performed through the dynamics of the present study was the validation of the model.