• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1237-1244
• /
• 2006

This research discussed about method for basis construction of sea jacket construction. Several access ways of method for foundation construction of sea jacket construction are used. Accompany many efforts of design and build process to overcome the form of construction work and application equipment, special quality of construction and restriction and so on of sea environment in the case of pile foundation. Therefore, great many factor of sea condition, construction special quality, base condition, construction time, equipment composition, worker composition etc. shows other work form in spot at sea jacket construction process.

• Ocean Systems Engineering
• /
• 제2권3호
• /
• pp.205-215
• /
• 2012

Recently, interest of offshore structure construction in South Korea is growing as the land space becomes limited for further development and the renewable energy grows to be more attractive for the replacement of the fossil energy. In order for the optimal construction of optimum offshore floating structures, development of safe and economical offshore foundation technologies is a priority. In this study, the large-deformation behavior of a suction pile, which markets are rapidly growing nowadays, is analyzed for three different loading locations (top, middle, and bottom of the suction pile) with three different displacement inclinations (displacement controlled with displacement inclinations of 0, 10, and 20 degrees from the horizontal). The behavior analysis includes quantifications of maximum resistances, translations, and rotation angles of the suction pile. The suction pile with its diameter of 10 m and height of 25 m is assumed to be embedded in clay, sand, and multi layers of subsea foundation. The soil properties of the clay, sand, and multi layers were determined based on the results of the site investigations performed in the West sea of South Korea. As analyses results, the maximum resistance was observed at the middle of the suction pile with the displacement inclination of 20 degrees, while the translations and rotations resulting from the horizontal and inclined pullouts were not significant until the horizontal components of movements at the loading points reach 1.0 m.

• Geomechanics and Engineering
• /
• 제33권5호
• /
• pp.519-528
• /
• 2023

In this paper, we present the results of an experimental study on the effect of polymer support fluid on shaft resistance of offshore bored piles. A series of pullout tests were performed on bored piles installed under various boundary conditions considering different types of grounds and support fluids, and a range of support fluid exposure times. Contrary to previous studies concerning onshore bored piles, a time dependent effect of polymer fluid on shaft resistance was observed in all ground types. The adverse effect of polymer support fluid on the shaft resistance, however, was considerably less than bentonite support fluid for a given exposure time. No significant reduction in shaft resistance was evident when limiting the exposure time of the polymer support fluid to the side wall of the borehole within 2-3 hours. The degree to which the polymer fluid affects shaft resistance seemed to vary with the ground type. A proper consideration should be given to the time dependent effect of polymer fluid on shaft resistance of bored piles installed in offshore construction environment to limit its adverse effect on the pile performance. The practical implications of the findings are discussed.

• 한국지반공학회논문집
• /
• 제24권8호
• /
• pp.149-160
• /
• 2008

1990년대 이후로 인천과 부산신항 등의 물류중심항구 및 송도 신도시와 같은 유비쿼터스 도시 개발에 발맞추어 인근해상연약지반 매립공사가 활발히 진행되면서 측방유동 해상말뚝기초의 거동특성에 폭넓은 관심이 집중되고 있다. 측방유동 말뚝기초 거동에 대한 연구 및 규명은 원심모형기 개발과 컴퓨터 기능의 향상으로 인하여 폭넓은 시도가 이루어져 왔으며, 특히 말뚝구조물에 작용하는 측방유동압의 특성이 가장 중요한 초점이 되고 있다. 이에 본 연구에서는 대변형 압밀연계 유한요소해석 기법(LDFE)을 바탕으로 배수조건(비배수 : 단기, 배수 : 장기)에 따른 측방유동 해상 말뚝기초의 거동특성을 분석하였으며 특히, 말뚝-지반 상호작용을 고려한 측방유동압에 중점을 두었다. 본 수치해석에서는 지층조건, 말뚝두부의 경계조건, 성토하중 크기, 평균압밀도 네 가지 중요변수에 따른 거동양상을 비교 분석하였으며, 이로부터 비배수 단계와 배수 단계에서의 측방유동압의 분포형태와 크기에 대한 정량적인 차이를 확인하였다.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.81-87
• /
• 2018

The seismic response, the natural frequencies and the mode shapes of an offshore wind turbine with twisted tripod substructure subject to various pile-ground interactions are discussed in this paper. The acceleration responses of the tower head by four historical earthquakes are presented as the seismic response, while the other loads are assumed as ambient loads. For the pile-ground interactions, the fixed, linear and nonlinear models are employed to simulate the interactions and the p-y, t-z and Q-z curves are utilized for the linear and nonlinear models. The curves are designed for stiff, medium and soft clays, and thus, the seven types of the pile-ground interactions are used to compare the seismic response, the acceleration of the tower head. The mode shapes are similar to each other for all types of pile-ground interactions. The natural frequencies, however, are almost same for the three clay types of the linear model, while the natural frequency of the fixed support model is quite different from that of the linear interaction model. The wind turbine with the fixed support model has the biggest magnitude of acceleration. In addition, the nonlinear model is more sensitive to the stiffness of clay than the linear pile-ground interaction model.

• 한국지반공학회논문집
• /
• 제38권4호
• /
• pp.21-32
• /
• 2022

강재형 말뚝기초는 안정적인 지지력 확보와 높은 시공성으로 해양구조물 기초로 널리 활용되고 있다. 일반적으로 설계수명에 도달한 해양구조물은 해체수순을 밟게 되는데 말뚝기초는 높은 인발하중과 경제적인 이유로 예외적으로 현장에 존치되는 경우가 많다. 현장에 존치된 기초는 환경오염뿐만 아니라 신규구조물을 건설하는데 장애요인이 될 수 있으므로 말뚝기초 완전해체를 위한 연구가 필요한 실정이다. 본 연구에서는 인발하중을 획기적으로 저감시킬 수 있는 신형식 이중벽 말뚝기초를 제안하고 축소모형실험을 통해 인발하중 저감성능을 실험적으로 평가하였다. 이를 위해 축소된 이중벽 말뚝기초를 제작하고 건조된 모래지반에서 말뚝 설치 및 인발 거동을 모사하였으며, 측정된 인발하중을 동등한 단면의 일반말뚝과 비교하였다. 그 결과, 조밀한 모래지반에서 이중벽 말뚝의 최대 인발력이 일반말뚝에 비해 45% 감소되는 것을 확인하였다. 본 연구를 통해 이중벽 말뚝의 인발하중 저감 성능과 메커니즘을 검증하였으며, 설계수명에 도달한 기초를 완전히 회수할 수 있는 가능성을 확인하였다.

• 한국해안·해양공학회논문집
• /
• 제21권6호
• /
• pp.427-436
• /
• 2009

해양에서는 횡방향 하중에 의해 구조물 기초의 설계가 좌우되기 때문에 이 연구에서는 기존의 말뚝 기초 공법보다 횡방향 지지력이 크고 시공성능이 우수한 새로운 형식의 말뚝 기초 공법을 제안하였다. 제안한 기초에 대한 성능을 평가하기 위하여 수치해석을 수행하였으며, 기존 항만 현장 조건에 대입하여 설계를 수행하여 시공 특성과 재료비 감소 효과를 통한 경제성 평가를 수행하였다. 연구에서 강관말뚝에 비해 횡방향 지지력의 증가를 확인하였으며, 기존 공법과 비교하여 공사비용은 62~80%정도로 평가되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.825-839
• /
• 2010

The global and domestic market for offshore wind farm is expected to grow fast, and the design and installation of substructure and foundation is getting more important. As for the offshore wind farms located in the shallow(depth < 20m) water, the construction and installation of the substructure and foundation makes up about 1/4 ~1/3 of the offshore wind farm construction cost, and the portion is expected to increase because the turbine capacity is increasing from 2 ~ 3MW to 5MW or larger and the water depth of wind farms is also increasing over 30m. As a foundation for offshore wind turbine, the suction caisson foundation is being considered to be a highly competitive alternative to the conventional monopile or gravity based structure, because it has features suitable for the offshore construction such as quick installation, no heavy equipment for penetration and no hammering noise for driving. In order to study the installation behaviour of the suction caisson, laboratory tests were performed with sand. The pore water pressure and displacement were measured to analyze the suction pressure during penetration, the penetration speed and the amount of heaving.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1707-1711
• /
• 2008

Landing pier is connect from onshore to offshore with bridge type that a coast structure. The sub-structure is consisted of vertical or batter pile and combined reinforced concrete slab. These days useful design method of quay wall of landing pier type for pile foundation analysis abide by approximate depth of pile supported method, "Harbor and port design criterion, 2005 The ministry of land transport and maritime affairs". The approximate depth of pile supported is calculated two kind of method that one is assume to below depth of 1/$\beta$ from assumed submarine surface and other is 1st fixpoint depth by Chang(1937)'s theory. By this paper, FEM dynamic analysis of 3-dimensions was achieved that it has compared pile fixed end modeling with elastic spring modeling base on winkler theory.

• 한국전산구조공학회논문집
• /
• 제28권4호
• /
• pp.375-384
• /
• 2015

해상풍력발전의 건설이 여러 가지 환경 및 가설공법 등의 설치환경 등의 원인에 의하여 건설지점이 천해에서 심해로 이동하는 경향을 나타내고 있다. 이러한 경향 속에 해상풍력발전 지지구조물의 심해화에 따른 지지구조물에 대한 연구는 중요성이 더욱 증대될 것으로 판단된다. 본 연구에서는 기존의 Jacket 구조물에 대하여 Precast Concrete Block 및 Suction pile을 적용한 Jacket 구조물을 제안하고 이에 대하여 구조해석 및 안전성 평가를 실시하였다. 또한 제안된 구조물에 동조액체감쇠기를 적용하여 구조물 진동성능 향상을 도모하고자 하였다. 연구결과, 제안된 신형식 Jacket 구조물은 충분한 안전성을 가지고 있는 것으로 평가되었으며, 동조액체감쇠기를 적용하였을 경우, 약 5%의 진동저감 효과가 있는 것으로 검토되었다.