• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권6호
• /
• pp.577-588
• /
• 2016

Due to the uncertainties related to the flaw assessment parameters, such as flaw size, fracture toughness, loading spectrum and so on, the probability concept is preferred over deterministic one in flaw assessment. In this study, efforts have been made to develop the reliability based flaw assessment procedure which combines the flaw assessment procedure of BS7910 and first-and second-order reliability methods (FORM/SORM). Both crack length and depth of semi-elliptical surface crack at weld toe were handled as random variable whose probability distribution was defined as Gaussian with certain means and standard deviations. Then the limit state functions from static rupture and fatigue perspective were estimated using FORM and SORM in joint probability space of crack depth and length. The validity of predicted limit state functions were checked by comparing it with those obtained by Monte Carlo simulation. It was confirmed that the developed methodology worked perfectly in predicting the limit state functions without time-consuming Monte Carlo simulation.

• 제어로봇시스템학회논문지
• /
• 제16권12호
• /
• pp.1233-1240
• /
• 2010

In the flat panel display and semiconductor industries, the visual alignment system is considered as a core technology which determines the productivity of a manufacturing line. It consists of the vision system to extract the centroids of alignment marks and the stage control system to compensate the alignment error. In this paper, we develop a Kalman filter algorithm to estimate the alignment mark postures and propose a coarse-fine alignment control method which utilizes both original fine images and reduced coarse ones in the visual feedback. The error compensation trajectory for the distributed joint servos of the alignment stage is generated in terms of the inverse kinematic solution for the misalignment in task space. In constructing the estimation algorithm, the equation of motion for the alignment marks is given by using the forward kinematics of alignment stage. Secondly, the measurements for the alignment mark centroids are obtained from the reduced images by applying the geometric template matching. As a result, the proposed Kalman filter based coarse-fine alignment control method enables a considerable reduction of alignment time.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.154-160
• /
• 2004

The Sulfide Stress Corrosion Cracking (SSCC) resistance of structural steels is one of the critical concerns for the operators, material designers, and fabricators of oil-field equipment, especially treating sour gas (H2S) containing fluids. As far as its fabricators concerned, the systematic care of welding parameters should be taken to obtain comparable SSCC resistance of their weldment to that of its base material. In this respect, every different type of welding joint design for this use should be verified to be SSCC-proof with relevant test procedures. In this study, the welding parameters to secure a proper SSCC resistance of steel pipe's weldments were reviewed on the Welding Procedure Qualification Records (WPQR), which had been employed for actual fabrication of an offshore structure for oil and gas production. Based on this review, a guideline of welding parameters, such as, heat input, welding consumable for Y.S. 65 ksi class steel pipe material is proposed in terms of the NACE criteria for SSCC resistance.

• Journal of Information Technology Applications and Management
• /
• 제23권2호
• /
• pp.81-95
• /
• 2016

Software export is very important for developing the domain software industry. Up to now, the study related in this issue is not enough even if exports are not activated. In our study, we treated and analyzed the three SME cases that have each successful record in recent years focusing to sales channels establishment and product localization. This study was done by interviewing the marketing directors mainly, and applied email exchanges, phones, and document analyses. Some implications can be addressed for the potential SME software exports. In the perspectives of sales channels building, the trust for product and firm itself is needed to have a good offshore partners. These are required to make the good relationship with partners, brand value's diffusion, and technical competency. As for product localization, the customization is important to meet the needs for local users effectively. So it is desirable to accept the advisory suggestions from the local consulting experts or representative customers. And the joint export strategy using the platform by linking some related products is effective for SME's software product's export.

• Structural Engineering and Mechanics
• /
• 제57권5호
• /
• pp.951-968
• /
• 2016

Long-span cross-strait bridges extending into deep-sea waters are exposed to complex marine environments. During the construction stage, the flexible freestanding bridge towers are more vulnerable to environmental loads imposed by wind and wave loads. This paper presents an experimental investigation on the dynamic responses of a 389-m-high freestanding bridge tower model in a test facility with a wind tunnel and a wave flume. An elastic bridge model with a geometric scale of 1:150 was designed based on Froude similarity and was tested under wind-only, wave-only and wind-wave combined conditions. The dynamic responses obtained from the tests indicate that large deformation under resonant sea states could be a structural challenge. The dominant role of the wind loads and the wave loads change according to the sea states. The joint wind and wave loads have complex effects on the dynamic responses of the structure, depending on the approaching direction angle and the fluid-induced vibration mechanisms of the waves and wind.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.821-830
• /
• 2010

Deck plates and hatch coming of large container carrier and offshore structures are joined by ultra-thick plates whose thickness is more than 60mm. Traditionally FCAW has been used to join the thick plates in butt joint. However, FCAW has been replaced with EGW since the welding efficiency of EGW is higher than that of FCAW. Tandem EGW using two electrodes has been applied to vertical position welding by several shipyards. EGW requires one or two layers of bead whereas FCAW requires more than 20 layers of weld bead in thick welding. However, high welding residual stresses are generated by EGW since it uses higher heat input than FCAW. In the present study, a finite element model is suggested to predict the residual stresses induced by the tandem EGW. Butt specimen of EH40 TMCP shipbuilding steel plates vertical welding was modeled by a three-dimensional model. Residual stresses were measured by X-ray diffraction method and to verify the numerical result. The results show a good agreement with experimental result.

• 수산해양기술연구
• /
• 제31권1호
• /
• pp.15-23
• /
• 1995

여수 연안 정치망 어장의 주변 해역을 중심으로 1990년 4월부터 11월까지 매월 채집해서 분석한 식물플랑크톤의 분포량과 여수수협 위판장으로부터 구한 어획량 자료등을 이용하여 여수 연안 정치망 어장의 환경요인인 식물플랑크톤의 분포량과 어획량 변동과의 관계를 분석 정리한 결과를 요약하면 다음과 같다. 1) 식물성 플랑크톤의 출현량은 춘계와 추계보다 하계에 최대가 되고, 특히 육수의 유입이 많은 여수만 중 돌산연안 수역 분포량이 많고, 소리도와 세존도부근의 식물성 플랑크톤 분포량은 내만수의 확장 경향을 추정하는데 유익하게 이용될 수 있다. 2) 여수 연안 정치망에 어획되는 주요 어종의 어획량은 삼치, 갈치, 고등어, 정어리, 멸치, 전갱이 및 방어의 순이고, 어획되는 시기는 정어리와 멸치가 4~6월, 전갱이, 갈치 및 고등어는 6~10월이 였으며, 삼치는 전 어기에 걸쳐 어획되었다. 3) 여수 연안 정치망 어장의 어획량은 식물성 플랑크톤 출현량과 상관 관계가 있고, 이들 식물성 플랑크톤량은 하계 육수의 영향을 많이 받는 내만수에 최대의 출현량을 보인다. 또, 이 어장의 어획량은 하계에 많으므로 여수 연안 정치망 어장은 육수의 유입에 의해 풍부한 영양염류를 공급받는 내만수내의 이료생물의 생산력이 어획량을 좌우하는 어장의 중요한 환경요인이 될 수 있다

• 수산해양기술연구
• /
• 제32권2호
• /
• pp.125-131
• /
• 1996

In order to investigate the relation between the environmental properties and the catch fluctuation of set net fishing grounds located in the coastal waters of Yosu, oceanographic observations on the fishing grounds were carried out by the training ship ofYosu Fisheries University from January, 1990 to September, 1992, and the data obtained were compared with the catch data from the joint market ofYosu fisheries cooperative society from 1984 to 1993. The resuItes obtained are summerized as follows : 1. The ranges of water temperature and salinity in the fishing ground was 7.0 to $27^{\circ}C.$and 26.6 to 33.2${\textperthousand}$, and water temperature increased from March to August and decreased from September to February of following year. 2. The salinity in the fishing grounds was relatively high without significant changes from November to June of the following year. From July, however, the salinity decreased to continue a low value till September and then increased. The salinity in the fishing ground was dominated mainly by the precipitation and its variation was large at the north entrance of set net fishing ground, influenced greatly by the land waters from the river of Somjin, but small in the offshore of the fishing grounds. 3. The fishes caught by the set nets were arranged in order of catch as follows; Spanish mackerel> Horse mackerel > Sardine > Anchovy > Hair tail. The catches of Anchovy and Sardine were high in April to May and those of Hair tail in June to July, but Spanish mackerel and Horse mackerel were caught for whole period of fishing. Spanish mackerel was caught most in September and least in April and their means were largest in August and smallest in June. 4. The ranges of optimum water temperature for fishing by the set nets was 13.5 to $25^{\circ}C.$, and in the ranges the catches increased with increasing temperature. The ranges of optimum salinity for fishing varied between 25.0 and 32.0${\textperthousand}$.

• 대한환경공학회지
• /
• 제37권6호
• /
• pp.349-356
• /
• 2015

본 연구는 부산연근해에서 서식하는 저서어류 체내의 미량금속에 의한 인체 위해 영향을 정량적으로 평가하기 위하여 수행되었다. 부산의 용호부두 인근에서 채취 된 4종의 식용저서어류 넙치, 우럭, 쥐치, 밑달갱이 조직내의 미량금속(trace metals)의 함량을 ICP-MS를 이용하여 분석하였다. 그리고 이를 토대로 어류섭취를 통한 미량금속의 인체 노출량을 파악하고, 이로 인한 잠재적 인체 위해도 평가를 수행하였다. 4종의 어류 조직 내 미량금속의 평균함량은 Li, Cr, Ni, Cu, Zn, As, Cd, Pb이 각각 $0.005{\pm}0.009$, $0.77{\pm}0.30$, $0.29{\pm}0.34$, $0.49{\pm}0.14$, $15.96{\pm}2.52$, $10.62{\pm}4.67$, $0.001{\pm}0.002$, $0.045{\pm}0.06mg/kgdw$으로 나타났다. 이 지역에서 채취된 어류의 섭취로 인한 표준체중(60 kg)의 국민에 대한 노출평가 결과 Cu, Zn은 PMTDI (provisional maximum tolerable daily intake)의 0.0032, 0.054-0.18%, As, Cd, Pb는 PTWI (provisional tolerable weekly intake)값의 13, 0.0041, 0.020%로 나타나 합동식품첨가물전문가위원회(The Joint FAO/WHO Expert Committee on Food Additives, JFCFA)에서 권고하는 각원소의 제한섭취량에 비하여 매우 낮은 수준이었다. 그리고 독성(비발암)위해도 평가 결과는 모두 HI (hazard index)지수가 1 이하로 장기간 섭취하여도 안전한 것으로 나타났으며, 4종의 모든 어류섭취로 인한 As의 노출로 인한 초과 발암 위해도도 10만명 당 1명 이하로 나타나 역시 장기섭취로 인한 발암 확률도 무시할 만한 수준인 것으로 나타났다.

• 수산해양교육연구
• /
• 제9권2호
• /
• pp.121-148
• /
• 1997

The Japanese fishery management system has been established on the basis of various experience accumulated over many years. The fishery management system in Japan, one of the oldest fishery management systems in the world, is aimed at ensuring comprehensive utilization of the water surface and developing fishery productivity, by giving protection of the breeding environment of aquatic animals and plants, enabling the appropriate use of fishery grounds, preventing and solving disputes over fishery grounds and making other fishery adjustments. Japanese Fishery Law has been changed largely into (1) The Feudal Era(to 1900), (2) The Oldest Fishey Law(1901~48), (3) Current Fishery Law(1949 to present). Japanese fishery legislation is designed as a single package combining coastal, offshore and distant-water fisheries. During the period of the old fishery law, numerous conflicts arose over the joint use of fishing grounds and fish stocks. Such conflicts occurred among users of the same gear as well as between users of different gears or of different sizes of fishing craft. Large scale conflict sometime occurred between neighbouring fishing communities due to a lack of fairness in principle and coordination in practice. Therefore, the new fishery law enacted in 1949. This law was designed primarily to realize the most effective and rational use of fishing grounds and fishery resources, the basic philosophy being that, through democratic organization by fishermen themselves, productivity would be stimulated and incomes and living standards eventually improved. Nowadays, Community Based Fisheries Management through democratic organization by fishermen themselves have to enforce at coastal fisheries. This Community Based Fisheries Management manage to fishery resources by fishermen themselves and harvest in collaboration with that resources. Therefore, this paper is intended to briefly to describe the entire system and the historical development of Japanese fishery legislation in order to assist in reform of our country fisheries management regime.