• Journal of the Korean Institute of Gas
• /
• v.20 no.2
• /
• pp.49-57
• /
• 2016

Aqueous ammonia is widely used in household cleaners, fertilizers and denitrification process. It is usually treated in concentrations from 10 % to 30 %, and release accidents have occurred frequently. In this study, we developed a simplified estimating method and equation to calculate threat zone easily in case of emergency due to release accident of aqueous ammonia. We calculated the consequence distance for toxic endpoints of aqueous ammonia(concentration 10 % ~ 30 %) at different puddle areas($1m^2{\sim}500m^2$) using the ALOHA program. Based on the result, we analyzed the relationship between concentration and puddle area with the threat zone and created the equation.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.73-73
• /
• 2017

환경부는 화학물질로 인한 국민건강 및 환경상의 위해(危害)를 예방하고 화학물질을 적절하게 관리하고, 화학물질로 인하여 발생하는 사고에 신속히 대응함으로써 화학물질로부터 모든 국민의 생명과 재산 및 환경을 보호하기위한 법률인 "화학물질관리법"을 2015년 1월 1일부터 시행하였다. 화학물질관리법에서는 유해화학물질의 취급기준과 유해화학물질 취급시설의 설치 및 관리 기준을 준수토록 하고 있으며, 유해화학물질 취급시설을 설치 및 운영 시에는 사전에 화학사고 발생으로 사업장 주변 지역의 사람이나 환경 등에 미치는 영향을 평가하여 유해화학물질 취급시설의 설치단계에서 안전성을 확보하기 위한 유해화학물질 화학사고 장외영향평가서를 작성 및 제출하도록 하고 있다. 또한 사고대비물질을 규정 수량이상 취급하는 경우 위해관리계획서를 작성하여 지역사회에 고지하도록 하고 있다. 법 시행 이전에 유해화학물질 취급시설을 설치한 사업장은 사업장 규모에 따라 장외영향평가서의 제출 유예기간인 2019년 12월 31일까지 제출하여야 하며, 사고 대비물질의 영업허가를 득해야하는 사업장은 2017년 내 장외영향평가서를 제출하여야 한다. 장외영향평가(off-site risk assessment(ORA)) 제도는 유해화학물질 취급시설의 기본평가정보(공정 정보), 장외평가정보(사고 시나리오 선정 및 위험도 분석), 타 법령과의 관계정보로 구성되어 있다. 장외영향평가의 효율적인 작성을 위하여 현장과 일치된 공정정보(공정개요 및 공정도면 등의 자료)의 확보가 필수적이다. 본 발표에서는 복잡한 장외영향평가 제도로부터 기업의 대응을 위한 장외영향평가 운영 절차와 장외영향평가서의 효율적인 작성을 위한 사전 준비 자료 및 작성 방안을 제시하여, 사업장에서 장외영향평가 제도를 이행하는데 도움을 주고자 한다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2114-2115
• /
• 2008

We consider the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PD) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PD testing delivers the best possible information about defects and enables the classification of the risk. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PD measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers is described.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.150-156
• /
• 2018

As the types and usage of chemical increase, modern countries should protect their health and environment from the risk of hazardous chemical. Chemical accidents not only affect humans but also cause huge losses to the environment. Moreover, since its effects do not end in a short period of time, it is necessary to identify the extent of the damage and establish a prevention and response system in advance. In 2015, the Chemical Substances Management Act provided a system for assessing the impact on the people and the environment around the workplace. However, it is difficult to quantitatively evaluate the impact on environmental factors such as vegetation and aquatic, with the current hazard assessment methods. The purpose of this study is to analyze the quantitative risk of environmental receptors. This study improved the existing risk assessment formula by using the environmental vulnerability index and established the end point concentration criterion which can estimate the damage range to environmental media. To verify the results of the study, a virtual accident scenario was selected and a case study was conducted. As a result, the extent of impact on the environmental medium can be calculated, and the degree of environmental risk of the zone can be quantified through the risk analysis considering the environmental vulnerability. This study is expected to increase the reliability of the reliability of the existing risk anaylsis method beacause it is a risk analysis method that can be applied when the environmental factors are absolutely necessary and when the residents and environment are complex.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1243-1244
• /
• 2022

In recent years, the growing interest in off-site construction has led to factories scaling up their manufacturing and production processes in the construction sector. Consequently, continuous large-scale site monitoring in low-variability environments, such as prefabricated components production plants (precast concrete production), has gained increasing importance. Although many studies on computer vision-based site monitoring have been conducted, challenges for deploying this technology for large-scale field applications still remain. One of the issues is collecting and transmitting vast amounts of video data. Continuous site monitoring systems are based on real-time video data collection and analysis, which requires excessive computational resources and network traffic. In addition, it is difficult to integrate various object information with different sizes and scales into a single scene. Various sizes and types of objects (e.g., workers, heavy equipment, and materials) exist in a plant production environment, and these objects should be detected simultaneously for effective site monitoring. However, with the existing object detection algorithms, it is difficult to simultaneously detect objects with significant differences in size because collecting and training massive amounts of object image data with various scales is necessary. This study thus developed a large-scale site monitoring system using edge computing and a small-object detection system to solve these problems. Edge computing is a distributed information technology architecture wherein the image or video data is processed near the originating source, not on a centralized server or cloud. By inferring information from the AI computing module equipped with CCTVs and communicating only the processed information with the server, it is possible to reduce excessive network traffic. Small-object detection is an innovative method to detect different-sized objects by cropping the raw image and setting the appropriate number of rows and columns for image splitting based on the target object size. This enables the detection of small objects from cropped and magnified images. The detected small objects can then be expressed in the original image. In the inference process, this study used the YOLO-v5 algorithm, known for its fast processing speed and widely used for real-time object detection. This method could effectively detect large and even small objects that were difficult to detect with the existing object detection algorithms. When the large-scale site monitoring system was tested, it performed well in detecting small objects, such as workers in a large-scale view of construction sites, which were inaccurately detected by the existing algorithms. Our next goal is to incorporate various safety monitoring and risk analysis algorithms into this system, such as collision risk estimation, based on the time-to-collision concept, enabling the optimization of safety routes by accumulating workers' paths and inferring the risky areas based on workers' trajectory patterns. Through such developments, this continuous large-scale site monitoring system can guide a construction plant's safety management system more effectively.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.506-511
• /
• 2022

In the Chemicals Control Act, a system was implemented to unify off-site risk assessment and risk management plan into the prevention and management system for chemical accidents. Among the hazardous chemicals which have been covered in system, the accident preparation substances are designated as chemical substances that are likely to occur and of which damage scale are likely to be large in the event of chemical accidents. In this study, risks were compared by selecting accident preparation substances with similar regulated quantities. In addition, risk assessment studies were conducted applying the accident scenarios. Four types of materials such as ammonia, hydrogen chloride, carbon disulfide and benzene were selected for the study, and risks were finally analyzed using Safeti 8.0, a quantitative risk assessment program by DNV. As a result, some materials are identified to have high risks comparing to other substances having similar regulated quantities.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.84-92
• /
• 2001

In today's world, rise in the establishment of social infrastructure resulting from population saturation in large cities has led to more extensive and frequent use of chemical materials on facilities. A result, unexpected and serious accidents, hazards, contingencies and disasters are more prevalent than ever. Such phenomenon calls for more devoted and concerted efforts towards finding ways to reduce the safety hazards that are seen to take place more often than before with the increase in the number of facilities that are prone to bring disaster and hazard coupled with the conventional safety problems that continue to exist even today. In developed countries, such challenge is addressed by various appropriate countermeasures drawn up by local professional committees on industrial facilities, whose members conduct offsite and onsite evaluation un the potential industrial disasters and its seriousness and provide their advice thereof. Against this backdrop, this study aims at identifying a comprehensive safety allowance level (safety acceptable level) when imposing limitation on the development of conventional or new facilities, for the fur pose of establishing a safety allowance level of disastrous and dangerous facilities in Korea. This is done by assessing and applying the level of danger each individual is exposed to in a randomly selected region (disastrous and dangerous areas in Seoul) based on probability of quantitative hazards, as well as simulation and calculation methods which include: i) social disaster evaluation method applying Quantified Risk Assessment of Health & Safety Executive of UK and Matrix of Risk of Evaluated Sources of Hazard; ii) Fault Tree or Event Tree Analysis and etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.599-607
• /
• 2017

Since 2015, small and medium domestic enterprises that treat more than a certain quantity of chemical substances in accordance with the Chemical Substance Control Act are obliged to submit an off-site impact assessment and risk management plan. In order to reduce the administrative and economic burden of the risk assessment, its impact was determined. Toxic leaks of nitric acid, methanol, and acetic acid were estimated and the correlations (between them?) were calculated. In addition, the correlations of this study were used to compare the KORA results according to the accident scenarios of the actual workplace and the extent of the damage as a function of distance in the case of toxic leaks. In this study, the correlation formula of the materials can be used to quickly determine the damage distance in the event of the accidental leakage of materials in the road or workplace, and to prepare emergency plans and respond to emergencies more quickly.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.31-37
• /
• 2018

The distrust about chemical plant safety have been increased by occurring the major industrial accidents. Chemical plants have become more and more enlarged and sophisticated to increase production amount and decrease cost. So hazard of industrial accidents also have been increased. In this situation, quantitative risk assessment is activated by introducing OCA(Off-site Consequence Analysis). So it is possible to analyze the objective hazard of chemical plant. Currently OCA focus on the end point of hazardous area by fire/explosion/dispersion. But in this case, it is possible to analyze the industrial accident effect to near the chemical plant but hard to consider the actual hazard by frequency and population density. This study analyzes the validity about application of F-N curve to OCA by compare end point with F-N curve about accident.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.211-219
• /
• 2019

Since improper management practices of solid medical waste (SMW) could potentially result in serious health risks and environmental problems, it is very important to properly treat and dispose of the medical wastes. In this study, current practices of SMW management from storage to final disposal stage in 12 health care facilities (HCFs) of Burundi were investigated using the official government reports. The results showed that 75% and 92% of HCFs used uncovered wheelbarrows and trucks for on-site or off-site SMW transportation, respectively, indicating that most transportation equipment and waste workers are not safely protected. The results also showed that 92.8% of SMW (15,736.4 ton) from all 12 HCFs were inappropriately disposed of through uncontrolled land disposal and incineration. If pharmaceutical wastes and discarded medical plastics (29.5% of SMW) can be separated and treated properly, the treatment costs can be reduced and resource savings can be achieved. Raising awareness of healthcare workers and general public about potential health effects arising from improper SMW management, sufficient financial and human resources for the treatment facilities (especially incinerators), and effective regulations and guidelines for transportation and treatment of SWM are some of the major tasks for safe and sustainable medical waste management in Burundi.