• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.95-104
• /
• 1999

Use of the ultra thick plate is being continuously increased in large off-shore structures, ships, bridges and skyscraper construction, due to increasingly large-sized steel structures and it seems that this trend will be maintained. But, occurrence of the lamella tearing has been reported in ultra thick plate used for construction. It is reportedly caused by impurities such S(sulfur), P(phosphorus) and others accumulated in the ultra thick plate's centerline in the thickness direction with strip shape or by restraint residual stress caused by the welding. In the ultra thick plate made by continuous casting method, occurrence of lamination is difficult to avoid because of the properties of production procedure. Therefore, with a view to reducing the lamella properties, this report tries tearing in the steel structure in the view of welding strength rather than metallic properties, this report tries to seek the optimum groove and welding procedure by using the computer simulation based on FEM(Finite Element Method).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1299-1304
• /
• 2011

A wind turbine (WT) should be shut down as fast as possible to minimize its own damage in a storm-driven situation. Shutdown of a large wind farm requires a power grid to have a ramp-up capability large enough to balance between generation and consumption of electrical energy. This paper proposes a supervised shutdown algorithm of a wind farm to meet a required ramp-down rate in a grid code in the case of a storm-driven situation. The information on the speed and the direction of wind is measured at a wind mast (WM) installed around a wind farm. If the wind speed exceeds a cut-out speed, the number of WTs to be shut down simultaneously is decided to meet a required ramp-down rate of a grid-code. Arrival times to each WT from the WM are calculated and sorted in the order of time. Then a sequence of groups is generated. The shutdown start/end times of each group are decided to avoid superposition between adjacent two groups. The performance of the proposed shutdown algorithm is verified under various storm scenarios. Results indicate that the proposed algorithm can not only protect the wind farm in the case of a storm-driven situation but also meet the required ramp-down rate. In addition, the algorithm can produce more energy than that of a conventional shutdown algorithm.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.215-216
• /
• 2014

This paper proposes a control algorithm for permanent magnet synchronous generator with a back-to-back three-level neutral-point clamped voltage source converter in a medium-voltage offshore wind power system under unbalanced grid conditions. The proposed control algorithm particularly compensates for the unbalanced grid voltage at the point of common coupling in a collector bus of offshore wind power system. This control algorithm has been formulated based on the symmetrical components in positive and negative rotating synchronous reference frames under generalized unbalanced operating conditions. Instantaneous active and reactive power are described in terms of symmetrical components of measured grid input voltages and currents. Negative sequential component of ac input current is injected to the point of common coupling in the proposed control strategy. The amplitude of negative sequential component is calculated to minimize the negative sequential component of grid voltage under the limitation of current capability in a voltage source converter. The proposed control algorithm makes it possible to provide a balanced voltage at the point of common coupling resulting in the generated power of high quality from offshore wind power system under unbalanced network conditions.

• Corrosion Science and Technology
• /
• v.20 no.1
• /
• pp.26-36
• /
• 2021

Pipes operating in the seawater environment faces cavitation degradation and corrosion of the metallic component, as well as a negative synergistic effect. Cavitation degradation shows the mechanism by which materials deteriorate by causing rapid change of pressure or high-frequency vibration in the solution, and introducing the formation and explosion of bubbles. In order to rate the cavitation resistance of materials, constant conditions have been used. However, while a dynamic cavitation condition can be generated in a real system, there has been little reported on the effect of ultrasonic amplitude on the cavitation resistance and mechanism of composites. In this work, 3 kinds of epoxy coatings were used, and the cavitation resistance of the epoxy coatings was evaluated in 3.5% NaCl at 15 ℃ using an indirect ultrasonic cavitation method. Eleven kinds of mechanical properties were obtained, namely compressive strength, flexural strength and modulus, tensile strength and elongation, Shore D hardness, water absorptivity, impact test, wear test for coating only and pull-off strength for epoxy coating/carbon steel or epoxy coating/rubber/carbon steel. The cavitation erosion mechanism of epoxy coatings was discussed on the basis of the mechanical properties and the effect of ultrasonic amplitude on the degradation of coatings.

• Korean Journal of Environmental Biology
• /
• v.40 no.2
• /
• pp.206-213
• /
• 2022

Ecological characteristics of a brown alga, Scytosiphon lomentaria, were investigated from January 2021 to December 2021 in its natural habitat off Sodol, Jumunjin, eastern coast of Korea. The S. lomentaria population at the site formed widespread patches on mid shore. During the investigation, environmental conditions including seawater temperature, salinity, and dissolved oxygen were monitored at the site. Growth and maturation of the S. lomentaria population were identified through qualitative and quantitative investigations. An estimation of the effective cumulative temperature for maturation of the alga was obtained based on growth data and a biological zero temperature of 8℃. Sporangia were observed from February to May when seawater temperatures ranged from 7.7℃ to 16.4℃. A maturation peak was detected in April when seawater temperature was 12.1℃. After zoospore release, the alga became bleached and only the crust remained after June. Developmental initiation of the thallus occurred at temperatures above 8℃. Its maturation required approximately 162 degree-days.

• The Journal of Fisheries Business Administration
• /
• v.35 no.2
• /
• pp.91-115
• /
• 2004

The main purpose of this study is to analyze the cooperative squid fisheries problems surrounding the $E128^{\circ}$, established by the 1965 Korea - Japan Fisheries Agreement which banned Korean large trawlers' fishing east to the $E128^{\circ}$ In fact, the moratorium was put on by Japans request. However, such issue did not occur until the filefish stock in the southern Korean sea, which was a major target fish species of the large trawl fisheries, The filefish stock collapsed completely around 1991 and at the same time most of bottom fish stocks in the East China Sea began to show a symptom of over - exploitation. Thus, the off - shore large trawlers learned to have a little opportunity of finding out alternative fish stocks as well as fishing grounds. Fortunately, at that time squid resource stock and consumption were on the increasing trend. The large trawl fisheries were able to economically exploit squid stock east to the $E128^{\circ}$ through cooperative fishing with squid angling light boats in the East and East - South Sea, even though such cooperative fishing activities violate the existing fishery laws apparently. Some important reasons that the large trawlers have continued the cooperative fishing seem to be because (ⅰ) squid resource stock has been on the increasing state over time, (ⅱ) the trawl fisheries have made a significant contribution to meeting domestic and export demands and stabilizing squid prices, and (ⅲ) they have kept domestic squid market from foreign competition. However, the new Korea - Japan fisheries agreement in 1998 provided a momentum of questioning the effectiveness of the $E128^{\circ}$ by the squid - related fisheries other than the squid angling. Serious conflicts between squid - related fisheries began to emerge and to be much intensified. Squid angling industries in the East opposed to large trawlers's efforts to formalize such illegal cooperative squid fishing activities. Their main argument was that such formalizing would definitely make the East coast squid prices lower and in turn their business performance would be worse off. The results of quantitative analysis suggest that the trawlers' massive landing may have a significant influence on lowering the east coast squid prices. Now, an important issue that the squid - related fisheries and the government are facing is to solve such complex squid fishing problems through a multi - participatory negotiation process, including price stabilization, total allowable catch level and its operation schemes, $E128^{\circ}$ rearrangement, and so on.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.520-524
• /
• 2023

Regalecus russellii, which spends most of its life in the deep sea, occasionally appears in coastal waters. However, the reasons for its appearance remain unclear. In Korea, R. russellii mainly appears along the eastern coastal waters, and most of them are caught in fishing gear, such as gill nets, or are stranded on the shore; nevertheless, the frequency of appearance is extremely low. Even if found, this species is often identified to be morphologically similar to Trachipterus ishikawae, and comprehensive analysis to identify the species through sample collection is limited. Consequently, information on the biological characteristics of R. russellii appearing in the coastal waters of Korea is scarce. Herein, the anatomical characteristics of R. russellii caught in a gill net off the Gangwon-do coast on March 14, 2023, were analyzed, and coastal water temperature was measured using an ocean buoy. Our results showed that the individual was male, its total length was 320 cm, body weight was 27.52 kg, body length was 26.62 cm, gonad weight was 619.45 g, and liver weight was 218.71 g. The stomach was full of euphausiids. The water temperature changed drastically at 15-30 m roughly a week before the R. russellii individual was caught, and the subsurface water temperature was lower than 10 ℃. Our findings provide baseline data to understand the ecological characteristics of R. russellii appearing along the eastern coast of the Korea.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.2
• /
• pp.49-55
• /
• 1982

The purpose of this study is to classify the factors influenced on the damages of head works suffered from the storm flood occurred on July 22 1980 in both Musim and Bochong rivers and to find out an integral counter measures against the causes influenced on the disaster of head works in the engineering aspect of planning, design, construction and maintenance. In this survey, number of samples was taken 25 head Works, and the counter measures against the causes of their disasters summarized was as follows, 1. In the aspect of planning a. As the flood water level after the establishment of head works is more increased than the level before setting of head works owing to having more gentle slope of river bed between the head works than nature slope of river bed. Number of head works should be reduced for the appropriate annexation of them b. In the place where head works is established on the curved point of levee, the destruction of levee becomes severe by the strong deflective current. Therefore the setting of head works on the curved point should be kept off as long as possible and in case of unavoidable circumstances the construction method such as reinforced concrete wall or stone wall filed with concrete and anchored bank revetments should be considered. 2. In the aspect of design a. As scoring phenomena at up stream is serious around the weir Where the concentration of strong current is present in such a place, up stream apron having impermeability should be designed to resist and prevent scoring. b. As the length of apron and protected bed is too short to prevent scoring as down stream bed, the design length should be taken somewhat more than the calculated value, but in the case the calculated length becomes too long to be profitable, a device of water cushion should be considered. c. The structure of protected river bed should be improved to make stone mesh bags fixed to apron and to have vinyl mattress laid on river bed together with the improvement for increasing the stability of stone mesh bags and preventing the sucked sand from the river bed. d. As the shortage of cut-off length, especialy in case of the cutoffs conneting both shore sides of river makes the cause of destruction of embankment and weir body, the culculation of cut-off length should be taken enough length based on seepage length. 3. In the aspect of design and constructions a. The overturing destruction of weir by piping action was based on the jet water through cracks at the construction and expansion joints. therefore the expansion joint should be designed and constructed with the insertion of water proof plate and asphalt filling, and the construction joint, with concaved shape structure and steel reinforcement. b. As the wrong design and construction of the weep holes on apron will cause water piping and weir destruction, the design and construction of filter based on the rule of filter should be kept for weep holes. c. The wrong design and construction of bank revetment caused the severe destruction of levee and weir body resulting from scoring and impulse by strong current and formation of water route behind the revetment. Therefore bank revetment should be designod and constructed with stone wall filled with concrete and anchored, or reinforced concrete wall to prevent the formation of water flow route behind the wall and to resist against the scoring and impulse of strong stream. 4. In the aspect of maintenance When the damaged parts occurred at head works the authorities and farmers concerned should find and mend them as soon as possible with mutual cooperation, and on the other hand public citizen should be guided for good use of public property.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.129-139
• /
• 2002

Fish distribution characteristics are essential to assess and estimate fisheries resources in a particular area. The primary goal of this study is to determine the distribution characteristics by the bottom trawling in the Yellow Sea west of South Korea. The surveys were carried out between 33$^{\circ}$00'N~37$^{\circ}$00'N latitude and 124$^{\circ}$00'E~126$^{\circ}$00'E longitude at EEZ(Exclusive Economic Zone) of Korea in Yellow Sea on May and August, 1999 and April, 2000. The ships used in this survey were the R/V Chung-kyeong(G/T 300) and R/V Dong-baek(G/T 1,050) of Yeosu National University. The results obtained can be summarized as follows 1. From the trawl data the fisheries resources are seriously decreasing through most of the species(about more 50%) have been appeared only one time at the bottom trawl on April, 2000. The total fish species caught by the trawl net during the 3 times survey were 106 species and a few species(dominant species) of these occupied 50~90% of the quantity of the total quantity by number or by weight. Among the dominant species the tanaka's snailfish was recorded to be the most dominant species in the survey area. The fish species in the Yellow Sea were clustered according to the regions. They clustered in two or three partes to the south-north direction in the spring season and clustered in two parts to the on-off shore direction of the shore in the summer season. Most of the fish caught at the the trawl net with cover-net(30.3mm) were small sized. They were shorter than 15 cm in length and the extruding rate of the cod-end which was 60mm mesh size ranges about 90%. 2. The densities of the number and weight per unit volume derived from the total catches sampled in April, 2000 survey were $1532.2{\times}10^{-6}fish/m^3$ and $39.55{\times}10^{-6}kg/m^3$, respectively. 3. The density variation of fish population between 1999 and 2000 showed a slight tendency to increase.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.479-490
• /
• 2016

Seabed drilling system has recently been used to drill seafloor mineral resources. This case report highlights the procedure and result of sea-trial of seabed drilling system at off-shore of Japan on March, 2016 as well as briefs an international-technical trend of seabed drilling system. In case of having less than 100 m drill depth, seabed drilling system is favorable for seafloor mineral deposits which are mostly distributed within a narrow district and situated between 1000~3000 m water depth, compared with vessel-mounted drilling system. The system is featured by the remotely-operated drill gear, which has top drives, drill strings and mud system on it. The core samples are generally recovered to ship with seabed driller after a dive. In this sea-trail, recovery rate of core samples averagely shows about 55% and the recovered rocks mostly correspond to fresh and/or weak-altered basalt. In case of drilling hydrothermal ore deposit, the recovery rate would be lower than 55% because of the fragile nature of ores. Alternatively it is used to collect cutting chips through riser or bins in order to increase the recovery rates. Recently a reverse circulation method is taken considered to acquire the better cutting-chips. Three-leg type outrigger system and four-leg type leveling system are the competing landing-instruments of seabed drill system. However the landing efficiency using these gears has to be further monitored due to lack of case reports.