• 제목/요약/키워드: off-body

검색결과 666건 처리시간 0.036초

음양균형의학으로서의 자세이완기법(PRT) 개요 (Introduction to the Positional Release Techniques (PRT), as a Yin-yang Balance Based Approach)

  • 인창식
    • 턱관절균형의학회지
    • /
    • 제8권1호
    • /
    • pp.16-23
    • /
    • 2018
  • Positional Release Techniques (PRTs) are an umbrella term for manual therapies harnessing spontaneous musculoskeletal balancing mechanism of the body facilitated by finding and maintaining therapeutic position. PRT has its origin in the Strain Counterstrain (SCS) technique by Dr. Jones but encompasses diverse related techniques that stemmed off from the SCS. PRT emphasizes postural balance within the body and innate healing potential of the body including the postural balance of the temporomandibular joint (TMJ). This study briefly reviews concepts, history, and contemporary study reports on PRT with a focus on the yin-yang balance based approach of PRT.

  • PDF

시각장애인의 제자리멀리뛰기 동작에 대한 운동학적 분석 (The Kinematic Analysis on The Stand Long Jump of Visually Impaired Persons)

  • 오정환;최정규;정익수;이동진;최수남;남택길
    • 한국운동역학회지
    • /
    • 제16권4호
    • /
    • pp.39-47
    • /
    • 2006
  • This study long jump action to each situation on a chessboard and section of sight disabled person and normal person through third dimension reflex analysis mechanical special quality because do comparative analysis sight disabled person's exercise ability and technology structure of action that run understand. As can do better without danger of injury map and training of exercise item that action that run is included, do offer of pabulum by purpose. Through this study, conclusion is as following. 1. Sight disabled persons' long jump average recording (121.84cm) showing normal persons' average recording (259.27cm) and much differences, show that motion of body is not big to Touch-down from Ready action. 2. Each phase body center composition(r) average speed displayed result that it is more meaning more than Each phase time required. 3. Began in line carriage without body back stretching in 1 situation on Event one are sight disabled persons. Was expose that do not bend enough knee and ankle than normal person in Event two. Was expose that body is not drooped for surface of land in Event three, and knee and ankle were expose that do not unfold easily than normal person. Was expose that do not bend enough on Touch-down knee by relation that can not grasp position of the floor in Event four. 4. When taking off, the average of horizontal speed of body center are 1.80m/sec for blind people and 3.53m/sec for the normal. In this connection, the study shows that the difference of horizontal speed between the blind and the normal is bigger than difference of vertical speed, which are 1.56m/sec for the blind and 1.98m/sec for the normal. Also, composite speed also shows us big difference between 2.41m/sec of the blind and 4.07m/sec of the normal. The speed body center of take-off was expose that average adjuster are big width of deceleration than average - beginning disabled person's average by 2.23m/sec - 1.71m/sec in the vertical speed. 5. If examine change of high and low for z Sign of right hand, change of high and low showed as is small than normal person is sight obstacle, and all hand movements are small and was expose that do not use enough reaction of body as well as in ready action.

인체 움직임과 안테나 위치가 WBAN 채널 용량에 미치는 영향 분석 (Effect of Body Movement and Position of Antenna on the Capacity of WBAN Channel)

  • 안춘수;안병직;김선우;최재훈
    • 한국전자파학회논문지
    • /
    • 제23권2호
    • /
    • pp.229-234
    • /
    • 2012
  • 본 논문에서는 wireless body area network(WBAN)에서의 채널 성능을 측정하고 분석하였다. 실험은 무반향실에서 다양한 인체 움직임과 송신 안테나 위치에 따라서 2.45 GHz ISM 대역 채널을 측정함으로써 이루어졌다. $2{\times}1$ 다중 입력 다중 출력 시스템의 다이버시티 이득과 상관 관계를 비교하기 위하여 두 송신 안테나를 인체의 서로 다른 위치에 부착하였다. 본 논문에서의 실험 결과는 송신 다이버시티 시스템의 outage 채널 용량은 두채널 간의 상관 관계와 깊은 관련이 있음을 보여준다.

여자대학생의 신체이미지가 의복행동과 체중조절에 미치는 영향 (The Effect of Body Image on the Clothes and Dieting of Female University Students)

  • 김인화;임자영
    • 한국생활과학회지
    • /
    • 제19권4호
    • /
    • pp.687-698
    • /
    • 2010
  • This study found that physical image affects behaviour of clothes, ready-to-wear satisfaction or dissatisfaction, weight control targeting the female university students. Results showed that people, who manage their appearance well, seeks esthetics and showing off, on the contrary, the person, who has not confidence of her body, pursues virtue. It was also found that people who have confidence in their body shape, and people who manage their appearance well are typically satisfied with ready-to-wear clothes, while people who are not satisfied with their appearance, do not like ready-to-wear clothes. People who are concerned with appearance and who manages their appearance well, are typically worried about obesity, and they manages their weight control carefully. However, people who have confidence in their bodies and who do not manage their weight do not pay attention to weight control. Consequently, fit was also found that people with more confidence tend to do more exercise and more frequently visit saunas. The less they don't satisfied with their body, the more fast, dietary treatment, or weight control with the other ways.

Short-Channel Intrinsic-Body SDG SOI MOSFET의 문턱전압 도출을 위한 해석적 모델 (An Analytical Model for Deriving The Threshold Voltage of A Short-channel Intrinsic-body SDG SOI MOSFET)

  • 장은성;오영해;서정하
    • 대한전자공학회논문지SD
    • /
    • 제46권11호
    • /
    • pp.1-7
    • /
    • 2009
  • 본 논문에서는 short-channel intrinsic-body SDG SOI MOSFET의 문턱전압 도출을 위한 간단한 해석적 모델을 제시하였다. Intrinsic silicon 채널 영역 및 gate oxide 내에서의 2차원 Laplace 방정식을 반복법(iteration method)으로 풀어 각 영역 내에서의 전위 분포를 채널에 수직한 방향의 좌표에 대해 4차 및 5차 다항식으로 표현하였으며 이로부터 표면전위를 도출하였다. 표면전위의 최소치가 0이 되는 게이트 전압을 문턱전압으로 제안하여 closed-form의 문턱전압 식을 도출하였다. 도출된 문턱전압 표현식을 모의 실험한 결과, 소자의 parameter와 가해진 bias 전압에 대한 정확한 의존성을 확인할 수 있었다.

한국 아동의 수면시간과 체질량지수 (Sleep Duration and Body Mass Index in Korean Children)

  • 최성민;서완석;성형모;구본훈;김경근;김소연;최소정;이종훈
    • Journal of the Korean Academy of Child and Adolescent Psychiatry
    • /
    • 제20권3호
    • /
    • pp.146-151
    • /
    • 2009
  • Objectives : We conducted this study to investigate the relationship between sleep duration and body mass index (BMI), in Korean children. Methods : We performed a cross-sectional analysis of data collected on 3,639 boys and girls (aged 7-12) in Daegu, Korea. The data included each child's age, sex, weight, height, extracurricular activities, bedtime, wake-up time, sleep latency, total sleep duration, parents' occupations, and parents' educational levels. The relationship between sleep duration and each variable was examined via analysis of variance (ANOVA). Results : The analysis showed an association between short sleep duration and high BMI. Boys showed a graded inverse relationship between sleep duration and BMI. However, there was no significant corresponding result for girls. In the total sample, hours of computer use, time when the computer was turned off, time when the television was turned off, mother's bedtime, and hours of extracurricular activity were associated with longer sleep duration. No association was found between sleep duration and hours of watching television, child's wake-up time, or educational level of the parents. Conclusion : The results of this study show an inverse relationship between a child's sleep duration and BMI;thus, children with shorter sleep duration tend to have higher BMIs.

  • PDF

접착 테이프 박리거동에 미치는 외부효과에 관한 연구 (A Study on External Effects on Peeling-off Behavior of Adhesive Tape)

  • 한원흠;정형식;이문호
    • 접착 및 계면
    • /
    • 제13권1호
    • /
    • pp.9-16
    • /
    • 2012
  • 접착용 테이프 박리거동에 미치는 외부효과를 알아보고, 이를 설명하는 준강체 실린더 체인(semi-rigid body cylinder chain) 모델을 제안하였다. 먼저 평면으로부터 테이프를 떼어낼 때, 테이프의 거동을 정성적으로 파악하고, 이를 토대로 준강체 실린더 체인 모형을 도식화하였다. 그 다음 테이프를 떼어내는 힘에 미치는 여러 요소들(온도, 표면거칠기, 떼어내는 속도, 각도 의존성, 테이프 폭 등)의 효과와 이들의 민감도를 분석하여 동일한 실험 기준조건을 설정하고, 이 조건에서 평면으로부터 테이프를 떼어내는 힘(벡터)의 각도 의존성을 $10^{\circ}$ 간격으로 측정하였다. 실험결과는 본 연구에서 확립한 모형이론과 실험오차범위 내에서 잘 일치하였고, 다른 요소들의 효과는 현상론적 입장에서 정성적으로 잘 설명되었다. 이러한 이유로, 본 결과는 PSA 테이프의 접착력을 시험 평가하는 모델로 활용될 수 있을 것으로 기대된다.

Motion Analysis of Two Floating Platforms with Mooring and Hawser Lines in Tandem Moored Operation by Combined Matrix Method and Separated Matrix Method

  • KOO BON-JUN;KIM MOO-HYUN
    • 한국해양공학회지
    • /
    • 제19권5호
    • /
    • pp.1-15
    • /
    • 2005
  • The motion behaviors including hydrodynamic interaction and mechanical coupling effects on multiple-body floating platforms are simulated by using a time domain hull/mooring/riser coupled dynamics analysis program. The objective of this study is to evaluate off-diagonal hydrodynamic interaction effects and mechanical coupling effects on tandem moored FPSO and shuttle taker motions. In the multiple-body floating platforms interaction, hydrodynamic coupling effects with waves and mechanical coupling effects through the connectors should be considered. Thus, in this study, the multiple-body platform motions are calculated by Combined Matrix Method (CMM) as well as Separated Matrix Method (SMM). The advantage of the combined matrix method is that it can include all the 6Nx6N full hydrodynamic and mechanical interaction effects among N bodies. Whereas, due to the larger matrix size, the calculation time of Combined Matrix Method (CMM) is longer than the Separated Matrix Method (SMM). On the other hand, Separated Matrix Method (SMM) cannot include the off-diagonal 6x6 hydrodynamic interaction coefficients although it can fully include mechanical interactions among N bodies. To evaluate hydrodynamic interaction and mechanical coupling effects, tandem moored FPSO and shuttle tanker is simulated by Combined Matrix Method (CMM) and Separated Matrix Method (SMM). The calculation results give a good agreement between Combined Matrix Method (CMM) and Separated Matrix Method (SMM). The results show that the Separated Matrix Method (SMM) is more efficient for tandem moored FPSO and shuttle tanker. In the numerical calculation, the hydrodynamic coefficients are calculated from a 3D diffraction/radiation panel program WAMIT, and wind and current forces are generated by using the respective coefficients given in the OCIMF data sheet.

구강건조증 환자에서 음허 측정 설문지 절단점 개발 및 진단능 평가 (Development Cut-off Value for Yin-deficiency Questionnaire and Diagnostic Ability of Yin-deficiency in Xerostomia)

  • 장승원;김진성
    • 대한한방내과학회지
    • /
    • 제35권4호
    • /
    • pp.483-497
    • /
    • 2014
  • Objectives: The aims of study were developing cut-off value of Yin-deficiency questionnaire (YDQ) for diagnosis of Yin-deficiency (YD) and compare diagnostic ability between YDQ and Yin-deficiency scale score (YDS) in xerostomia patients. Methods: We recruited 58 xerostomia patients. They were diagnosed YD or non-YD by 3 Korean medicine doctors (KMD). We assessed YD using YDQ and YDS. We evaluated xerostomia using VAS, Dry Mouth Symptom Questionnaire (DMSQ), Salivary Flow Rate (SFR), oral moisture on buccal mucosa and tongue surface (OMB and OMT). We surveyed tongue coatings using Winkel Tongue Coating Index (WTCI). Results: We diagnosed 23 patients YD and 35 patients non-YD. There were no significant differences of age, sex and body mass index between the YD and non-YD groups. Using receiver operating characteristic curve analysis, the optimal cut-off value of YDQ was defined as 304. Sensitivity, specificity and Youden index of YDQ were 86.96%, 71.43% and 1.5839 respectively. Using Cohen's coefficient of agreement, we found that degree of agreement between KMD and YDQ diagnosis was moderate (${\kappa}$=0.524, p<0.001). Using Pearson's correlation analysis, we found concurrent validity of YDQ and YDS were significant correlated. Using area under curve value, we found diagnostic ability between YDQ and YDS were not significantly different (p=0.505), but there were more strong correlations between DMSQ-symptoms and YDQ (r=0.731, p<0.001) than correlations between DMSQ-symptoms and YDS (r=0.418, p<0.01). Conclusions: The cut-off value of YDQ can diagnose YD in xerostomia and diagnostic ability of YDQ in xerostomia is better than YDS.

SIMULINK를 이용한 분리형 노즐을 갖는 터보팬엔진 성능모델 구성 및 탈설계점 성능 해석 (Performance Modeling and Off-design Performance Analysis of A Separative Jet Turbofan Engine Using SIMULINK)

  • 공창덕;박길수;이경선
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2012년도 제38회 춘계학술대회논문집
    • /
    • pp.219-224
    • /
    • 2012
  • 본 연구에서 중형 상용민간항공기 추진진기관인 분리형 노즐을 갖는 2 스풀 터보팬 엔진인 BR715-56의[1] 정상 성능모델을 구성 및 탈설계점 성능해석이 상용코드인 MATLAB/SIMULINK를[2] 이용하여 엔진성능특성과 엔진진단을 위해 수행되었다. 먼저 팬, 고압압축기, 고압터빈, 저압터빈 구성품 성능 맵들이 축척방법을 이용하여 유사성능 맵들을 축척하여 생성되었고 다음 탈설계점 성능모사 프로그램이 구성품들 간 유량과 일 조화에 의해 구성되었다. 모델은 용이한 정상 및 동적 모사와 사용자 편의의 장점을 갖는 SIMULINK 프로그램을 이용하여 개발되었다. 제안한 모델에 의한 탈설계점 해석 결과들은 다양한 작동 조건들에서 GASTURB에 의한 해석 결과들과 잘 일치함이 확인 되었다.

  • PDF