• Tribology and Lubricants
• /
• 제39권2호
• /
• pp.56-60
• /
• 2023

In this study, we evaluate the anisotropic flow of droplets according to the directionality of asperities. We manufacture a mold with an inclined hole by adjusting the jig angle using a high-power diode laser. Using the manufactured mold, we prepare specimens for wettability studies by the micro molding technique. We fabricate twelve kinds of surfaces with micro-asperities inclined at 0°, 15°, 30°, and 45° for asperity pitches of 100 ㎛, 200 ㎛, and 300 ㎛. We evaluate the static and dynamic behaviors of the droplets as a function of the asperities pitch and inclination angles. The anisotropic effect increases as the pitch increases between asperities, and the anisotropic flow characteristics increase as the inclination angle of the asperities increases. On the surface with hole pitches of 100 ㎛ and 200 ㎛, the contact angle of the droplet shows high hydrophobicity at approximately 160°, but on the surface with the 300-㎛ hole pitch, the contact angle is approximately 110°, indicating that the hydrophobic effect rapidly reduces. Additionally, when the inclination angle of the asperities is approximately 30°, the left and right contact angle deviations of the droplet are the lowest, showing that the roll-off angle is relatively low.

• 한국결정성장학회지
• /
• 제34권4호
• /
• pp.109-116
• /
• 2024

β-Ga₂O₃는 4.9 eV의 넓은 밴드갭과 8 MV/cm의 높은 항복전압으로 전력 소자 응용 분야에서 많은 관심을 받고 있는 대표적인 UWBG(Ultra-wide Band-gap) 반도체이다. 또한 용액 성장이 가능하기 때문에 SiC, GaN에 비해 성장 속도가 빠르고 생산 비용이 저렴하다는 장점이 있다[1,2]. 본 연구에서는 EFG(Edge-defined Film-fed Growth) 법을 통해 Si 도핑 된 β-Ga₂O₃ 단결정을 성장시키는 데에 성공하였다. 성장 방향과 성장 주 면은 각각 [010] / (001)로 설정하였으며 성장속도는 7~20 mm/h이다. 성장시킨 β-Ga₂O₃ 단결정은 다양한 결정 면 방향(001, 100, ${\bar{2}}01$)과 off-angle(1^o, 3^o, 4^o)에 따라 절단하여 표면 가공을 진행하였고, 가공 후 HVPE(Halide vapor phase epitaxy) 법을 이용해 epi-ready 기판 위에 homoepitaxial 층을 성장시켰다. 가공 후의 샘플과 epi-layer를 성장시킨 샘플을 XRD, AFM, OM, Etching 등의 분석을 통해 결정면과 off-angle에 따른 표면 특성을 비교하였다.

• 대한원격탐사학회지
• /
• 제28권5호
• /
• pp.477-487
• /
• 2012

L밴드 ALOS SAR 자료를 활용하여 우리나라 동해 연안해역의 해상풍을 산출하고 오차의 특성을 분석하였다. 그 동안 인공위성 산란계를 이용한 해상풍 산출이 본질적으로 불가능하였던 연안 해역에 대하여 SAR 자료로부터 고해상도 해상풍을 산출할 수 있었다. 산출된 SAR 바람을 해양 부이 자료와 비교한 결과 0.67 m/s의 작은 오차로 잘 일치함을 보여주었다. 서로 다른 L밴드 ALOS PALSAR GMF 2007 모델과 2009 모델로 산출된 해상풍을 인공위성 산란계 해상풍과 비교한 결과, 풍속과 풍향 각각 2.16 m/s와 $19.24^{\circ}$, 3.62 m/s와 $28.02^{\circ}$의 제곱평균근오차를 보이며, 인공위성 산란계의 기대 오차보다 다소 큰 경향을 나타냈다. 또한 산출된 L밴드 SAR 바람장은 풍향과 입사각에 대하여 특징적인 의존성을 보였다. L밴드 GMF 2007 모델은 $21^{\circ}$ 보다 작은 입사각에 대하여 큰 오차를 보인 반면, L밴드 GMF 2009 모델은 입사각에 대한 효과를 선형함수가 아니라 이차함수로 고려하여 주었기 때문에 작은 입사각 범위에서 풍속 오차가 6.8 m/s에서 1.14 m/s로 크게 감소하는 결과를 보였다. 본 연구는 L밴드 SAR 바람장의 다양한 활용을 위해서는 풍향과 입사각 효과, 그리고 다른 잠재적인 오차의 요인을 집중적으로 연구하여야 함을 강조하였다.

• 대한방사선치료학회지
• /
• 제16권1호
• /
• pp.1-9
• /
• 2004

목적 : 본 연구의 목적은 소조사면의 선량특성을 측정하며 콜리메이터의 위치에 따른 반음영의 변화와 중심선량의 분포양상을 측정하며 측외측정선량점의 변화에 따른 선량분포의 특성을 측정하여 최근 대두되고 있는 소조사면 방사선치료에 유용한 정보를 제공하는데 그 목적이 있다. 대상 및 방법 : 지멘스의 Primart 선형가속기의 6MV에너지를 이용하였으며 측정은 Farmer chamber와 Pinpoint chamber를 이용하여 심부선량율과 beam profile, 중심출력선량의 변화를 측정하였다. 중심선속의 변화에 따른 에너지의 특성과 반음영의 변화를 외측으로 2cm 간격으로 측정하였다. 측정은 $1{\times}1cm,\;3{\times}3cm,\;5{\times}5cm,\;10{\times}10cm$에서 측정하였으며 결과는 표준조건하의 측정값과 비교, 분석하였다. 결과 : Farmer chamber와 Pinpoint chamber를 이용해 $1{\times}1cm$, 10cm깊이에서 측정한 결과 두 측정기간에 소조사면에서는 $30\%$ 이상의 차이를 보였으며 조사면의 크기가 증가함에 따라 두 측정기간의 차이는 급격히 감소했다. 측외측정점의 변화에 따른 선량분포는 큰 차이가 없었으나 조사야의 크기가 감소함에 따라 $1{\times}1cm$에서는 약 $13\%$의 차이를 보여 조사야 크기에 따른 변화가 큰 것으로 측정되었다. 전체조사면에서 반음영이 차지하는 비율도 조사면이 적어짐에 따라 높게 나타났으며 $1{\times}1cm$의 조사면에서는 약 $50\%$가 반음영이 점유하는 것으로 측정되었다. 결론 : 세기조절방사선 치료를 위해서는 각기 다른 에너지 분포를 갖는 여러 각도에서 다수의 조사면를 필요로 하며 여러 복잡한 인자들이 관여하게 된다. 여러 인자들 중에서도 콜리메이터의 형태 및 위치에 따른 출력선량의 변화 양상을 정확히 측정하는 것은 매우 중요하다. 실험결과에서도 알 수 있듯이 측정깊이와 조사면의 크기 및 측정기의 종류에 따른 측정값의 변화가 매우 크게 나타나므로 양질의 세기조절방사선 치료를 제공하기 위해서는 특히 소조사면의 선량분포에 대한 특성을 정확히 측정하는 것이 매우 중요하다.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.301-311
• /
• 1999

The investigation to evaluate the possible effects of fish behaviour on acoustic target strength was carried out during the 1997 and 1998 hydroacoustic-demersal trawl surveys in the southern waters of Korea.The swimming speed and the target strength of individual, acoustically resolved fished swimming through the sound beam were measured using the split-beam tracking method on board R/V Kaya.The results obtained can be summarized as follows:1. The alongship and athwartship angles between -3dB poionts of a hull mounted 38 kHz split beam tranducer used in these surveys was >$3.76^{\circ}\;and\;6.74^{\circ}$ respectively, and the equal energy contour obtained from the measured beam pattern showed approximately the circular pattern. 2. The swimming speed measured off the south coast of Sorido in 23 January 1997 ranged 0.10 to 0.80 m/s with the average swimming spped of 0.36 m/s, and the target strength ranged -64.8 to -31.7 dB with the average target strength of -52.7 dB. The most dominant species sampled in this survey area were Japanese scaled sardine, Sardinella zunasi and Konoshiro gizzard shad, Konosirus punctatus, respectively.3. The swimming speed measured off the east coast of Kojedo in 24 March 1997 ranged 0.10 to 1.10 m/s with the average swimming speed of 0.40 m/s, and the target strength ranged -64.8 to -51.5 dB with the average target strength of -59.2 dB. The most dominant species sampled in this survey area were Swordtip squid, Photololigo edulis, Konoshiro gizzard shad and Japanese flying squid, Toddarodes pacificus, respectively and the swimming activity of these species seems to be controlled at speeds between 0.20 and 0.60 m/s. 4. The swimming speed measured the south coast of Kojedo in 25 March 1997 ranged 0.10 to 1.40 m/s with the average swimming speed of 0.51 m/s and the target strength ranged -64.3 to -47.7 dB with the average target strength of -55.1 dB. The most dominant species sampled in this survey area were Swordtip squid, Blotchy sillage, Sillago maculata and japanese scaled sardine, respectively and the swimming activity of these species seems to be controlled at speeds between 0.20 and 0.70 m/s.5. The swimming speed measured during morning twilight in the southeastern water of Cheju Island in 11 July 1998 ranged 0.20 to 1.0 m/s with the average swimming speed of 0.53 m/s, and the target strength ranged -65.0 to -47.0 dB with the average target strength of -57.1 dB. The most dominant species sampled in this survey area were Swordtip squid, Black scraper, Thamnaconus modesutus and japanese flying squid, respectively and the tile angle ranged$ +28^{\circ}\;to\;+2^{\circ}$ with the average tilt angle of -8.1$^{\circ}$ showing the downward migration.

• 원예과학기술지
• /
• 제35권3호
• /
• pp.314-322
• /
• 2017

The aim of this study was to determine suitable oxygen transmission rate (OTR) films for modified atmosphere (MA) storage of asparagus spears (Asparagus officinalis L.), and to examine the related changes in asparagus spear quality. Asparagus spears were packed with 10,000, 20,000, 40,000, 70,000, and $100,000cc/m^2{\cdot}day{\cdot}atm$ OTR film treatments for MA storage, and perforated film (conventional storage) was used as the control. The fresh weight loss rate was less than 1% in all OTR film treatments but not in the control. In all OTR film treatments, ethylene content rapidly increased on the first day of storage, and gradually decreased thereafter to $2.0{\mu}L{\cdot}L^{-1}$ by the final storage day. In the 10,000 cc and 20,000 cc OTR film treatments, carbon dioxide content was maintained within the permissible range for asparagus spears under recommended controlled atmosphere (CA) and MA conditions (5-12%). The oxygen content was maintained between 12% and 20% in all OTR film treatments. Hue angles and total chlorophyll content were highest in the 10,000 cc OTR film treatment in both tips and stems. Visual quality was maintained at a saleable level only in the 10,000 cc OTR film treatment until the final storage day (25 days). Based on sensory evaluation, the least off-odor was detected in the 10,000 cc OTR film treatment, and the most in the control treatment. While the soluble solids content decreased with all film treatments, it was maintained at the highest level in the 10,000 cc OTR film treatment. Vitamin C content decreased with all film treatments during storage, but was maintained at higher levels in the 10,000, 20,000, and 40,000 cc OTR film treatments. The firmness of tips and stems increased with storage duration in all film treatments, stems were firmer under the perforated film, 10,000, and 20,000 cc OTR film treatments. Given these results, the 10,000 cc OTR film treatment is considered the most appropriate for MA asparagus spear storage since visual quality and soluble solids content were maintained, and fresh weight loss, vitamin C content, off-odor, and yellowing were suppressed during storage.

• 대한족부족관절학회지
• /
• 제7권2호
• /
• pp.238-249
• /
• 2003

Purpose: To report the clinical result of the intraarticular calcaneus fracture after open reduction and internal fixation with plate by lateral approach. Materials and Methods: Thirty-six calcaneal fractures of 33 patients(29 men and 4 women) were treated by open reduction and internal fixation using an lateral approach from March, 1997 to May, 2002 and were followed more than one year. The autogenous iliac bone graft was done in 2 cases but the others didn't. Radiographically B?hler angle and Gissane angle on simple lateral radiograph were measured and in the 15 cases, the step-off(gap) of posterior facet joint on post-operative CT images were followed. The Salama method was used for evaluation of clinical results. Results: According to Sanders classification, 19 cases of the 36 cases were classified as type II. Type III fracture were found in 12 cases and type IV in 5 cases. The following results were obtained: twenty-two cases(61.1%) out of 36 cases were estimated as good or excellent. The good results or more were obtained in 15 cases(78.9%) in type II and 7 cases(58.3%) in type ill, but no case in type IV. B?hler angles were improved from preoperative average 1.6?to postoperative average 23.4?, Gissane angle was improved from preoperative 107.2?to postoperative 122.8?, respectively. Among 36 cases, Computed tomography was carried out in 15 cases. The postoperative step-off (gap) of posterior facet joint on computed tomography was filled with cancellous bone. Satifactory results was obtained in 7 cases with 2mm gap or less and in 6 cases of 2-5mm. There were no satifactory results in 2 cases with 5mm gap or more. Conclusion: Open reduction and internal fixation for intra-articular fracture of calcaneus was thought to be a good treatment modality. It is thought that the lateral approach is one of the good one for surgical treatment, and that accurate reduction of the posterior facet, acceptable recovery of B?hler angle are more important to obtain best results.

• 한국광학회지
• /
• 제16권4호
• /
• pp.304-312
• /
• 2005

본 연구에서는 여러 형태의 회절광학요소의 field performance를 조사하였다. Zemax 프로그램을 이용하여 다섯 개의 회절광학요소, 즉 투과형 평면 DOE, 투과형 곡면 DOE, 반사형 포물면 DOE, 반사형 평면 DOE, 그리고 반사형 곡면 DOE를 설계하였다. 그리고 이들 회절광학요소에 극자외선 파장인 13 nm와 가시광선 파장인 632.8 nm를 적용시켰다. 이들 DOEs에 사입사 조명시의 회절 한계 하에서의 시야각의 크기 및 파장에 따른 특성, 그리고 주된 수차의 형태를 상호분석 비교하였다. 회절한계 하에서 투과 및 반사 형태 모두에서 곡면 DOEs의 시야각이 평면 DOEs의 시야각보다 훨씬 크다는 것을 알 수 있었다. 또한 사입사 경우에 평면 DOEs와 포물면경의 주된 수차는 코마이며, 곡면 DOEs의 주된 수차는 비점수차와 상면만곡의 혼합된 형태로 나타남을 알 수 있었다. 측정을 통하여 얻은 시야각의 크기와 수차의 종류가 이론적인 결과와 잘 일치함을 알 수 있었다. 또한 극자외선영역에서 평면형 DOEs에 비해 곡면형 DOEs의 field angle의 증가율이 가시광선에서보다 더 효과적임을 알 수 있었다.

• International Journal of Control, Automation, and Systems
• /
• 제4권6호
• /
• pp.748-755
• /
• 2006

In this paper, a trade-off design and fabrication of IPMC(Ionic Polymer Metal Composites) as an actuator for a flapping device have been described. Experiments for the internal solvent loss of IPMCs have been conducted for various combinations of cation and solvent in order to find out the best combination of cation and solvent for minimal solvent loss and higher actuation force. From the experiments, it was found that IPMCs with heavy water as their solvent could operate longer. Relations between length/thickness and tip force of IPMCs were also quantitatively identified for the actuator design from the tip force measurement of 200, 400, 640, and $800{\mu}m$ thick IPMCs. All IPMCs thicker than $200{\mu}m$ were processed by casting $Nafion^{TM}$ solution. The shorter and thicker IPMCs tended to generate higher actuation force but lower actuation displacement. To improve surface conductivity and to minimize solvent evaporation due to electrically heated electrodes, gold was sputtered on both surfaces of the cast IPMCs by the Physical Vapor Deposition(PVD) process. For amplification of a short IPMC's small actuation displacement to a large flapping motion, a rack-and-pinion type hinge was used in the flapping device. An insect wing was attached to the IPMC flapping mechanism for its flapping test. In this test, the wing flapping device using the $800{\mu}m$ thick IPMC. could create around $10^{\circ}{\sim}85^{\circ}$ flapping angles and $0.5{\sim}15Hz$ flapping frequencies by applying $3{\sim|}4V$.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.1-15
• /
• 2004

The purpose of this study was to investigate the kinematic variables of the upper part of the body for 8 elderly men during walking. For this study, kinematic data were collected using a six-camera (240Hz) Qualisys ProReflex system. The room coordinate system was right-handed and fixed in space, with righted orthogonal segment coordinate systems defined for the head, trunk, and pelvis. Based on a rigid body model, reflective marker triads were attached on the 3 segments. Three-dimensional Cartesian coordinates for each marker were determined at the time of recording using a nonlinear transformation(NLT) technique with ProReflex software (Qualisys, Inc.). Coordinate data were low-pass filtered using a fourth-order Butterworth with cutoff frequency of 6Hz. Three-dimensional angles of the head, trunk, and pelvis segment were determined using a Cardan method. On the basis of each segment angle, angle-angle plot used to estimated the movement coordinations between segments. The conclusions were as follows; (1) During the support phase of walking, the elderly people generally kept their, head the flexional and abductional posture. Particularly, the elderly displayed little internal/external rotation. (2) The elderly people showed extensional and external rotation postures in the trunk movement. Particularly, It showed the change from adduction into abduction at the heel contact event of the stance phase. (3) The elderly people showed almost same pelvis movement from the flexion into extension, from the abduction into adduction, and from internal rotation into external rotation at the mid stance and toe off of the stance phase.