• Journal of the Korean Geotechnical Society
• /
• v.28 no.6
• /
• pp.31-38
• /
• 2012

In this present study, the long-term consolidation tests were performed using the remolded Kwang-Yang port clayey soil to clarify the effect of stress history and over-consolidation ratio (OCR) on the long-term consolidation characteristics of the soft clayey soil. For the over-consolidated state clayey soils, in case OCR exceeds 1.5, there are no great differences of secondary consolidation settlement and final settlement even if OCR increases from 2.0 to 3.0. Therefore, it has been understood that the value of OCR applied on the field site to reduce the secondary consolidation settlement and the final settlement is about 1.5. In addition, in order to investigate the relationship between the pre-loading period and the characteristics of long-term consolidation behavior obtained from the test results using the remolded Kwang-Yang port clayey soils, the influence on long-term consolidation behavior was not large though the pre-load was unloaded with the consolidation degree 70~80% exceeded.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.6
• /
• pp.73-81
• /
• 2002

Various CPT-based prediction models far profiling stress history of marine clay at the southern part of the Korean peninsula were investigated by using both statistical analysis and case history study. Preconsolidation pressures($\sigma'$p) and overconsolidation ratio(OCR) estimated by empirical correlations and cone penetration tests were compared with those of laboratory odometer test results. Stress history of marine clay determined by odometer test results was in general overconsolidated at below 10m depth from the mudline, whereas marine clay at below l0m depth from the mudline which has an around 0.3 overconsolidation ratio showed variable stresses and unstable states. Preconsolidation pressures were computed by both empirical methods of the Chen and Mayne(1996) and theoretical method of Konrad and Law(1987). It is estimated that Chen and Mayne(1996)'s prediction method based on pore water pressure is more reliable than any other prediction methods, and their method proved to be the most reliable for overconsolidation ratio estimation. However, it is recommended that Mayne & Holtz(1988) and Mayne & Bachus(1988) methods are more suitable than any other methods for predicting the overconsolidation ratio at an underconsolidated (OCR<1) clay. For these reasons, rather than making use of existing prediction models, development of site specific empirical correlations which considers local characteristics and site conditions may be required due to different local stress history and variable soil properties.

• Journal of the Korean Society for information Management
• /
• v.39 no.3
• /
• pp.165-193
• /
• 2022

It can be said that digital technology is at the center of the change in the modern work environment. In particular, in general public institutions that prove their work with records produced by business management systems and document production systems, the record management system is also the work environment itself. Gimpo City applied for the 2021 public cloud leading project of the National Information Society Agency (NIA) to proactively respond to the 4th industrial revolution technology era and implemented a public cloud-based AI-OCR technology enhancement project with 330 million won in support of 330 million won. Through this, it was converted into data beyond the limitations of non-electronic records limited to search and image viewing that depend on standardized index values. In addition, a 98% recognition rate was realized by applying a new technology called AI-OCR. Since digital technology has been used to improve work efficiency, productivity, development cost, and record management service levels of internal and external users, we would like to share the direction of enhancing expertise in the record management and implementation of work environment innovation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.97-107
• /
• 2024

Despite the rapid advancement in image recognition technology, achieving perfect digitization of tabular documents and handwritten documents still challenges. The purpose of this study is to improve the accuracy of digitizing the logbook by correcting errors by utilizing associated rules considered during logbook entries. Through this, it is expected to enhance the accuracy and reliability of data extracted from logbook through OCR programs. This model is to improve the accuracy of digitizing the logbook of the training ship "Saenuri" at the Mokpo Maritime University by correcting errors identified after Optical Character Recognition (OCR) program recognition. The model identified and corrected errors by utilizing associated rules considered during logbook entries. To evaluate the effect of model, the data before and after correction were divided by features, and comparisons were made between the same sailing number and the same feature. Using this model, approximately 10.6% of errors out of the total estimated error rate of about 11.8% were identified, and 56 out of 123 errors were corrected. A limitation of this study is that it only focuses on information from Dist.Run to Stand Course sections of the logbook, which contain navigational information. Future research will aim to correct more information from the logbook, including weather information, to overcome this limitation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.02a
• /
• pp.71-78
• /
• 2000

SHANSEP method involves the consolidation to stresses in excess of the preconsolidation pressure in order to overcome sample disturbance effect. The concept of SHANSEP is based on an approach to laboratory test which attempts to reproduce the in-situ conditions more closely than is possible in routine tests and evaluates normalized strength parameters for the soil as a function of OCR. But SHANSEP method can be applied only to fairly uniform clay deposits, and is unsuitable for a random deposit. In this study, CK/sub o/U triaxial compression test and incremental loading consolidation test were performed for the application of SHANSEP method on Yangsan clay. During the K/sub o/-consolidation, triaxial specimens were consolidated to stress equal to two times the in-situ vertical effective stress. And for overconsolidated condition, the specimens were swelled to a known vertical effective stress in order to have the desired OCR. With the results of CK/sub o/U triaxial compression test using the block samples, the relationship between c/sub u//σ/sub vc/' and OCR on Yangsan clay was established. For evaluating the undrained shear strength of Yangsan clay with depth, CK/sub o/U triaxial compression test was performed using the piston samples taken from Yangsan site. And also undrained shear strength was analyzed from the in-situ test such as Cone Penetration Test(CPT), Dilatometer Test(DMT), and Field Vane Test(FVT) and was compared with that of CK/sub o/U triaxial compression test.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.1
• /
• pp.73-79
• /
• 2011

A portion of oil for lubrication of compressor flows together with refrigerant in the refrigeration system. If the oil discharge from a compressor is increased in the refrigeration system, not only pressure drop is increased in other components, such as evaporator and gas cooler, but also heat transfer coefficient in the heat exchangers is decreased. Oil discharge rate from a compressor may strongly depend on operating conditions of a compressor. In this study, one stage single rotary compressor is employed for measuring oil circulation ratio(OCR). Carbon dioxide and PAG oil are used as refrigerant and lubricant. Using a U-tube densimeter, mixture density is measured. Oil circulation ratio(OCR) can be estimated by measured mixture density. The results obtained indicate that the oil circulation ratio(OCR) is increased as the suction temperature or compressor operating frequency is increased. Oil circulation ratio(OCR) correlation of the compressor is also suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.470-474
• /
• 2002

The graylevel image scanning system realization and design using CIS(Contact image Scanning)be amenable to recognize a papers, OMR and OCR sheet is proposed. The design technique is used CIS scanning sensor in fixing step motor and is optimized with DSP processor for inage processing, and transfer input image data par line in feeding a step unit to PC on the USB interfacer. This system is portable ad A4 size scanning. and keeps image scan processing speed 300mm/sec. The recognition percentage has 98% on the OCR and bar codes.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.113-120
• /
• 2020

Recently, the license plate OCR system has been commercialized in a variety of fields and preferred utilizing low-cost embedded systems using only cameras. This system has a high recognition rate of about 98% or more for the environments such as parking lots where non-vehicle is restricted; however, the environments where non-vehicle objects are not restricted, the recognition rate is about 50% to 70%. This low performance is due to the changes in the environment by non-vehicle objects in real-time situations that occur anomaly data which is similar to the license plates. In this paper, we implement the appropriate anomaly detection based on semi-supervised learning for the license plate OCR system in the real-time environment where the appearance of non-vehicle objects is not restricted. In the experiment, we compare systems which anomaly detection is not implemented in the preceding research with the proposed system in this paper. As a result, the systems which anomaly detection is not implemented had a recognition rate of 77%; however, the systems with the semi-supervised learning based on anomaly detection had 88% of recognition rate. Using the techniques of anomaly detection based on the semi-supervised learning was effective in detecting anomaly data and it was helpful to improve the recognition rate of real-time situations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.581-584
• /
• 2002

The graylevel image scanning system realization and design using CIS(Contact Image Scanning)be amenable to recognize a papers, OMR and OCR sheet is proposed. The design technique is used CIS scanning sensor in fixing step motor and is optimized with DSP processor for image processing., and transfer input image data par line in feeding a step unit to PC on the USB interfacer. This system is portable and A4 size scanning and keeps image scan processing speed 300mm/sec The recognition percentage has 98% on the OCR and bar codes.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.116-125
• /
• 2003

In this paper, we introduce a newly developed DSP module and Software which Is applicable to DTV-OCR and is designed to cancel the interference signal. In general, RF repeater has problems of system oscillation and signal Quality degradation due to feedback interference signal coming from transmit antenna. In this paper, we demonstrate newly developed DSP HW and SW module for cancelling the interference signal by investigating the field data measured through a RF repeater. Also, the structure and signal processing method for non-regenerative repeater system based on the newly developed DSP HW and SW module is illustrated as well.