• 한국해양공학회지
• /
• 제11권2호
• /
• pp.107-112
• /
• 1997

본 연구는 자유표면 인삭을 위한 실험 기법 개발에 관한 연구이다. 2차원 수중익에 의해 발생되는 자유표면파를 연구대상으로 삼았다. 실험은 회류수조에서 행하였다. NACA 0012 수중익을 여러가지 길이와 2가지양각에 대해서 실험한 결과 생기는 비선형 자유표면 파를 인식할 수 있도록 영상처리 기술을 도입하였다. 실헙결과 얻은 자유표면 형상을 다른 연구자의 결과와 비교하였다. 비교결과 영상처리의 기법이 자유표면을 인식하는데 대단히 유용한 도구임을 알 수 있었다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.127-127
• /
• 2017

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.105-112
• /
• 1999

This research is an experimental investigation of the region of the Biased Flow. This experiment was carried out in a circulating water channel, and the results are analyzed by using the PIV technique. The results are presented in velocity vector field, velocity contour and vorticity contour. The results were compared with those of Zdravkovich which were carried out in a wind tunnel. These results will be very useful to verify numerical codes.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.268-273
• /
• 2014

To investigate the turbulence characteristics within the boundary layer over a flat plate, an experimental study was performed using a PIV technique in a circular water channel. For two water velocities, 0.92 and 1.99 m/s, the water velocity profiles were taken and analyzed to determine turbulent characteristics such as the Reynolds stress, Taylor micro-length scale, and Kolmogorov length scale within the defect law region of the boundary layer. These analysis methods may be applied to research on the friction drag reduction technology using micro-bubbles or an air sheet over the surface of a ship's hull, because the physical reason for the friction drag reduction could be found by understanding the variation of the turbulence characteristics and structures in the boundary layer.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.429-434
• /
• 2002

The Synthetic Aperture Radar (SAR) data are considered to contain the greatest amount of information among various microwave techniques developed for measuring ocean variables from aircraft or satellites. They have the potential of measuring wavelength, wave direction and wave height of the ocean waves. But, it is difficult to retrieve significant ocean wave heights and surface current from conventional SAR data, since the imaging mechanism of ocean waves by a SAR is determined by the three basic modulation processes arise through the tilt modulation, hydrodynamic modulation and velocity bunching which are poorly known functions. Along-Track Interferometric (ATI) SAR systems can directly detect the Doppler shift associated with each pixel of a SAR image and have been used to estimate wave fields and surface currents. However, the Doppler shift is not simply proportional to the component of the mean surface current. It includes also contributions associated with the phase velocity of the Brags waves and orbital motions of all ocean waves that are longer than Brags waves. In this paper, we have developed a new method for extracting the surface current vector using multiple-frequency (L- & C-band) ATI SAR data, and have generated surface wave height information.

• 대한원격탐사학회지
• /
• 제29권3호
• /
• pp.337-349
• /
• 2013

Communication Ocean Meteorological Satellite (COMS) for the hybrid mission of meteorological observation, ocean monitoring, and telecommunication service was launched onto Geostationary Earth Orbit on June 27, 2010 and it is currently under normal operation service on $128.2^{\circ}$ East of the geostationary orbit since April 2011. In order to perform the three missions, the COMS has 3 separate payloads, the meteorological imager (MI), the Geostationary Ocean Color Imager (GOCI), and the Ka-band antenna. The MI and GOCI perform the Earth observation mission of meteorological observation and ocean monitoring, respectively. For this Earth observation mission the COMS requires daily mission commands from the satellite control ground station and daily mission is affected by the satellite control activities. For this reason daily mission planning is required. The Earth observation mission operation of COMS is described in aspects of mission operation characteristics and mission planning for the normal operation services of meteorological observation and ocean monitoring. And the first one-year normal operation results after the In-Orbit-Test (IOT) are investigated through statistical approach to provide the achieved COMS normal operation status for the Earth observation mission.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2009년도 한국우주과학회보 제18권2호
• /
• pp.49.3-49.3
• /
• 2009

Geostationary Ocean Colour Imager (GOCI) is the first ocean color instrument that will be operating in a geostationary orbit from 2010. GOCI will provide the crucial information of ocean environment around the Korean peninsula in high spatial and temporal resolutions at eight visible bands. We report an on-going development of imaging and radiometric performance prediction model for GOCI with realistic data for reflectance, transmittance, absorption, wave-front error and scattering properties for its optical elements. For performance simulation, Monte Carlo based ray tracing technique was used along the optical path starting from the Sun to the final detector plane for a fixed solar zenith angle. This was then followed by simulation of red-tide evolution detection and their radiance estimation, following the in-orbit operational sequence. The simulation results proves the GOCI flight model is capable of detecting both image and radiance originated from the key ocean phenomena including red tide. The model details and computational process are discussed with implications to other earth observation instruments.

• 한국해양공학회지
• /
• 제38권4호
• /
• pp.174-186
• /
• 2024

In coastal video monitoring, the direct linear transform (DLT) method with ground control points (GCPs) is commonly used for geo-rectification. However, current practices often overlook the impact of GCP quantity, arrangement, and the geographical characteristics of beaches. To address this, we designed scenarios at Chuam Beach to evaluate how factors such as the distance from the camera to GCPs, the number of GCPs, and the height of each point affect the DLT method. Accuracy was assessed by calculating the root mean square error of the distance errors between the actual GCP coordinates and the image coordinates for each setting. This analysis aims to propose an optimal GCP placement method. Our results show that placing GCPs within 200 m of the camera ensures high accuracy with few points, whereas positioning them at strategic heights enhances shoreline extraction. However, since only fixed cameras were used in this study, factors like varying heights, orientations, and resolutions could not be considered. Based on data from a single location, we propose an optimal method for GCP placement that takes into account distance, number, and height using the DLT method.

• 에너지공학
• /
• 제25권1호
• /
• pp.1-8
• /
• 2016

저온환경에서 석유생산이 이루어질 경우 유동관, 라이저와 같은 석유생산시스템 내에서 온도에 민감한 왁스 고형물이 빈번히 집적되어 석유 이송을 방해하거나 배관을 막아 유동안정성 확보를 위한 시간 소모와 경제적 손실이 발생할 수 있다. 이러한 왁스 집적 문제를 제어하기 위해 오일 내 왁스가 처음 석출되기 시작하는 온도인 왁스생성온도를 사전에 파악하는 것이 중요하다. 기존 왁스생성온도 표준측정법은 왁스결정 석출로 인하여 변하는 시료의 혼탁도를 육안으로 확인하는 한계가 있으며, 오일의 연속적인 온도변화를 측정하기 어려워 정확도가 낮다. 이 연구에서는 오일의 왁스생성온도를 정확하게 측정하고자 왁스생성온도 측정 가시화 실험시스템을 통해 시간에 따라 온도를 감소시키며 왁스생성거동을 촬영하였다. 또한 영상 처리기법으로 투명 오일시료의 명도변화를 분석하여 왁스생성온도를 측정하였으며, 이를 표준측정법의 결과와 비교분석하였다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권1호
• /
• pp.76-83
• /
• 2000

A measurement technique of a sea height of burst is introduced for a proximate test using the image recognition of video cameras. In the burst of fuse on the ocean, the burst center of fuse, the sea surface level and the height of calibration poles are measured by the process of image obtained from cameras. Finally, the height of burst of fuse can be computed by Hough transform algorithm. The error compensation algorithms are proposed to eliminate the errors caused by camera level and environmental parameters. As a result of experiment, it has been proved that the proposed measurement system shows the recognition of the center point of the burst image with ${\pm}$0.5m error.