• Safety and Health at Work
• /
• v.2 no.3
• /
• pp.260-272
• /
• 2011

Objectives: The promotion of health and safety (H&S) awareness among hospital staff can be applied through various methods. The aim of this study was to assess the risk level of physical hazards in the hospital sector by combining workers' perception, experts' evaluation and objective measurements. Methods: A cross-sectional study was designed using multiple triangulation. Hospital staff (n = 447) filled in an H&S questionnaire in a general hospital in Athens and an oncology one in Thessaloniki. Experts observed and filled in a checklist on H&S in the various departments of the two hospitals. Lighting, noise and microclimate measurements were performed. Results: The staff's perception of risk was higher than that of the experts in many cases. The measured risk levels were low to medium. In cases of high-risk noise and lighting, staff and experts agreed. Staff's perception of risk was influenced by hospital's department, hospital's service, years of working experience and level of education. Therefore, these factors should be taken into account in future studies aimed at increasing the participation of hospital workers. Conclusion: This study confirmed the usefulness of staff participation in the risk assessment process, despite the tendency for staff to overestimate the risk level of physical hazards. The combination of combining staff perception, experts' evaluation and objective measures in the risk assessment process increases the efficiency of risk management in the hospital environment and the enforcement of relevant legislation.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.139-147
• /
• 2008

• Safety and Health at Work
• /
• v.1 no.1
• /
• pp.29-36
• /
• 2010

This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm-shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers' compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012) and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.80-87
• /
• 2021

Risk assessment techniques are processes used to evaluate hazardous risk factors in construction sites, facilities, raw materials, machinery, and equipment, and to estimate the size of risk that could lead to injury or disease, and establish countermeasures. The most important thing in assessing risk is calculating the size of the risk. If the size of the risk cannot be calculated objectively and quantitatively, all members who participated in the evaluation would passively engage in establishing and implementing appropriate measures. Therefore, this study focused on predicting accidents that are expected to occur in the future based on past occupational accident statistics, and quantifying the size of the risk in an overview. The technique employed in this study differs from other risk assessment techniques in that the subjective elements of evaluators were excluded as much as possible by utilizing past occupational accident statistics. This study aims to calculate the size of the risk, regardless of evaluators, such as a manager, supervisor, safety manager, or employee. The size of the risk is the combination of the likelihood and severity of an accident. In this study, the likelihood of an accident was evaluated using the theory of Bud Accident Chainability, and the severity of an accident was calculated using the occupational accident statistics over the past five years according to the accident classification by the International Labor Organization.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2006.04a
• /
• pp.329-334
• /
• 2006

• Safety and Health at Work
• /
• v.12 no.2
• /
• pp.174-183
• /
• 2021

Background: Toluene diisocyanate (TDI) is a highly reactive chemical that causes sensitization and has also been associated with increased lung cancer. A risk assessment was conducted based on occupational epidemiologic estimates for several health outcomes. Methods: Exposure and outcome details were extracted from published studies and a NIOSH Health Hazard Evaluation for new onset asthma, pulmonary function measurements, symptom prevalence, and mortality from lung cancer and respiratory disease. Summary exposure-response estimates were calculated taking into account relative precision and possible survivor selection effects. Attributable incidence of sensitization was estimated as were annual proportional losses of pulmonary function. Excess lifetime risks and benchmark doses were calculated. Results: Respiratory outcomes exhibited strong survivor bias. Asthma/sensitization exposure response decreased with increasing facility-average TDI air concentration as did TDI-associated pulmonary impairment. In a mortality cohort where mean employment duration was less than 1 year, survivor bias pre-empted estimation of lung cancer and respiratory disease exposure response. Conclusion: Controlling for survivor bias and assuming a linear dose-response with facility-average TDI concentrations, excess lifetime risks exceeding one per thousand occurred at about 2 ppt TDI for sensitization and respiratory impairment. Under alternate assumptions regarding stationary and cumulative effects, one per thousand excess risks were estimated at TDI concentrations of 10 - 30 ppt. The unexplained reported excess mortality from lung cancer and other lung diseases, if attributable to TDI or associated emissions, could represent a lifetime risk comparable to that of sensitization.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.86-91
• /
• 2015

It is important to provide the farmers with practical and effective information of safety and health for individual crop to prevent or reduce occupational injuries in agricultural sector, since work characteristics and risk factors are not the same for all crops. In this study, risk assessment was carried out for cultivating shiitake mushrooms and then safety measures, which were based on the results of the risk assessment, were summarized and presented as the information of safety and health of shittake farmers. Guidelines for safety and health of the farmers of shiitake mushrooms, which were developed based on the risk assesment and safety measures, can be used by the farmers as self-educational tools or by the agricultural facilitators as an educational material for agricultural safety. It is expected that the guidelines can be useful in preventing occupational injuries of shiitake farmers.

• Safety and Health at Work
• /
• v.4 no.3
• /
• pp.156-159
• /
• 2013

Background: Cardiac pacemakers are known to be susceptible to strong electromagnetic fields (EMFs). This in vivo study investigated occurrence of electromagnetic interference with pacemakers caused by common environmental sources of EMFs. Methods: Eleven volunteers with a pacemaker were exposed to EMFs produced by two mobile phone base stations, an electrically powered commuter train, and an overhead high voltage transmission lines. All the pacemakers were programmed in normal clinically selected settings with bipolar sensing and pacing configurations. Results: None of the pacemakers experienced interference in any of these exposure situations. However, often it is not clear whether or not strong EMFs exist in various work environments, and hence an individual risk assessment is needed. Conclusions: Modern pacemakers are well shielded against external EMFs, and workers with a pacemaker can most often return to their previous work after having a pacemaker implanted. However, an appropriate risk assessment is still necessary after the implantation of a pacemaker, a change of its generator, or major modification of its programming settings.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.134-145
• /
• 2015

Objectives: An objective of this study was to perform a risk assessment and social cost-benefit analysis for revising permissible exposure limits for seven substances: Nickel(Insoluble inorganic compounds), benzene, carbon disulfide, formaldehyde, cadmium(as compounds), trichloroethylene, touluene-2,4-diisocyanate. Materials and Methods: The research methods were divided into risk and hazard assessment and cost-benefit analysis. The risk and hazard assessment for the seven substances consists of four steps: An overview of GHS MSDS(1st), review of document of ACGIH's TLVs (2nd), comparison between international occupational exposure limits and domestic permissible exposure limits(3rd), and analysis of excess workplace and excess rate for occupational exposure limits based on previous work environment measurement data(4th). Total cost was estimated using cost of local exhaust ventilation, number of excess workplace and penalties for exceeding a permissible exposure limit. On the other hand, total benefit was calculated using the reduction rate of occupational disease, number of workplaces treating each substance and industrial accident compensation. Finally, the net benefit was calculated by subtracting total cost from total benefit. Results: All the substances investigated in this study were classified by CMR(Carcinogens, Mutagens or Reproductive toxicants) and their international occupational exposure limits were stricter than the domestic permissible exposure limits. As a result of excess rate analysis, trichloroethylene was the highest at 11%, whereas nickel was the lowest at 0.5%. The excess rates of all substances except for trichloroethylene were observed at less than 10%. Among the seven substances, the total cost was highest for trichloroethylene and lowest for carbon disulfide. The benefits for the seven substances were higher than costs estimated based on strengthening current permissible exposure limits. Thus, revising the permissible exposure limits of the seven substances was determined to be acceptable from a social perspective. Conclusions: The final revised permissible exposure limits suggested for the seven substances are as follows: $0.2mg/m^3$ for nickel, 0.5 ppm(TWA) and 2.5 ppm(STEL) for benzene, 1 ppm(TWA) for carbon disulfide, $0.01mg/m^3$(TWA) for cadmium, 10 ppm(TWA) and 25 ppm(STEL) for trichloroethylene, 0.3 ppm(TWA) for formaldehyde, and 0.005 ppm(TWA) and 0.02 ppm(STEL) for toluene diisocynate(isomers).

• Safety and Health at Work
• /
• v.9 no.3
• /
• pp.249-256
• /
• 2018

This article aims to provide a systematic review of the exposure assessment methods used to assign wafer fabrication (fab) workers in epidemiologic cohort studies of mortality from all causes and various cancers. Epidemiologic and exposure-assessment studies of silicon wafer fab operations in the semiconductor industry were collected through an extensive literature review of articles reported until 2017. The studies found various outcomes possibly linked to fab operations, but a clear association with the chemicals in the process was not found, possibly because of exposure assessment methodology. No study used a tiered assessment approach to identify similar exposure groups that incorporated manufacturing era, facility, fab environment, operation, job and level of exposure to individual hazardous agents. Further epidemiologic studies of fab workers are warranted with more refined exposure assessment methods incorporating both operation and job title and hazardous agents to examine the associations with cancer risk or mortality.