• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.531-536
• /
• 2005

Infraclusion may be defined as teeth that stop their relative occlusal movement in the dental arches during or after the period of active eruption and then remain under the occlusal plane. Delayed exfoliation, malocclusion, increased susceptibility to dental caries and periodontal disease of both the neighboring teeth and retained molar, and dislocation of the successor are the consequencces of infraclusion of primary molars. Therefore, early diagnosis and appropriate treatments are necessary. The therapeutic approach of the infracluded teeth varied from preservation to extraction. The teeth with simple infraclusion without any signs of interference with occlusal and jaw development may be examined periodically with follow-up check and radiographically. However, if the infracluded tooth interferes with normal eruption of successor or shows any sign of delayed resorption, or the tipping of adjacent teeth or supraeruption of opposing teeth is expected, the teeth inflicted should be extracted and appropriate measures should be provided in order to maintain the normal development of occlusion and dentition. The adjacent teeth which have been collapsed over a infracluded deciduous teeth can disturb the arch length perimeter. In such cases, surgical approach might be necessary, although it would be difficult when teeth are severly leaned. However, an easier surgical access have been obtained by space regaining procedures, in young patients whose arch length has been shortened due to the infracluded teeth.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.9 no.2
• /
• pp.118-121
• /
• 2013

The supernumerary premolars account for 4%-9% of all supernumeraries and reported prevalence is 0.01%-1.00%. Multiple supernumerary teeth can be seen in syndromic phenotypes. But, only 2% of supernumerary premolars exhibited any pathological changes. Most of them cause interference with normal occlusal development that makes maintaining the disabled patients's oral hygiene difficult. It is recommended to delay the timing of extraction until the full permanent dentition is mature. If there is no complication, leaving the supernumerary premolars impacted is recommended. This case is about mental retardation patients with multiple supernumerary premolars.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.158-175
• /
• 2005

Statement of problem. Every effort has been continually made to obtain objectivity in measuring the longevity of fixed restorations, such as by establishing unified judgement standard for deciding success and adopting statistical method that analyzes the data of successful and failed cases at the same time. In Korea, however desired level of development has not to be made in this field yet. Purpose. This study, adopting California Dental Association (CDA) quality evaluation system, established objective standard for deciding success, and inferred the longevity of fixed restorations and their failure analysis through adopting Kaplan-Meier survival analysis. Material and method. In order to assess the longevity of flxed restorations serviced in Korea and causes of failure, a total of 1109 individuals (aged 15-74, 716 women and 393 men loaded with 2551 unit fixed restorations, and 1934 abutments) who lived in Kyung-In Province were examined and the findings were as follows : Results. 1. Length of service of fixed restorations serviced in Korea was 6.86$\pm$0.15 yr (mean), 5.5 yr (median), and the rate of success was 65.82% in 5 year survival, and 21.15% in 10 year survival. 2. When there was patient's need for replacing old prosthetics, longevity of fixed restorations was 7.51$\pm$0.27 yr (mean), 7 yr (median), and the rate of success was 61.08% in 5 year survival, and 17.57% in 10 year survival. 3. Longevity of fixed restorations was longest in the over-sixty age group(9.21$\pm$0.66) and that of the teen age group(3.39$\pm$0.28) was shortest (p<0.05). 4. Longevity of fixed restorations of women (7.38$\pm$0.18 years) was longer than that of men (6.00$\pm$0.26) (p<0.05). 5. As for the provider factor (such as unlicensed performers, university hospitals, and private clinic), there was no statistically significant difference in longevity of fixed restorations. 6. Defective margin (34.78%). periodontal disease (12.15%), periapical involvement (11.73%), was the most frequent causes of failure and poor esthetics group showed the longest life above all (p<0.05). Actual frequent causes of failure after removing old prosthetics were defective margin, periapical involvement, periodontal disease and uncemented restoration. In 75.67% of the cases, abutment state after removing old prosthetics was good enough for loading another prosthetics. 7. There was found to have statistically significant influence between longevity of single crown (6.35$\pm$0.20 yr) and that of 3 unit fixed restorations (7.60$\pm$0.30 y) (p<0.05). In each case the most frequent cause of failure was defective margin. 8. The number of cantilever pontic, pontic/abutment ratio, oral hygiene status were found to have no statistically significant influence on longevity of fixed restorations in all groups (p>0.05). 9. Longevity of fixed restorations made of non precious metal was longest (9.60$\pm$0.40 yr) semi precious and precious trailing behind(p<0.05). 10. Group function group (37.04%) and partial group function group (44.62%) were predominant in frequency but showed no correlation between them and among different types of occlusal plane and different types of occlusal surface (p>0.05). 11. Longevity of fixed restorations was longest in the centric interference group(9.35$\pm$0.62) (p<0.05) among different types of occlusal interference. Conclusion. We found that longevity of fixed restorations serviced in Korea is affected by age, gender and type of material, and that most frequent cause of failure is defective margin. In order to assess the accurate longevity of axed restorations, unified research design. overcoming inter-observer difference and establishing the objective research items are needed. Furthermore, it is thought that prospective approach through thorough study and regular follow-ups is needed just from the start of research. Nationwide detailed studies on length of service of fixed restorations manufactured in Korea are hoped to be conducted hereafter.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.3
• /
• pp.43-53
• /
• 1991

It is important to harmonize the occlusion with TMJ and neuromuscular system. However, clinically, how to harmonize is very difficult. The mandibular movement is the motion in which all component part of stomatognathic system participate. This study was performed to compare mandibular movement of mandibular prognathic patients group with that of normal group, to ascertain which components of mandibular movement have differences between two groups, and to use for occlusal treatment of mandibular movement. Thirteen adult who have physiologically normal occlusion and are free of TMJ dysfunction were selected as a control group(Group 1). Eight adult who are mandibular prognathic patient and have more than four anterior teeth crossbite, therefore have not anterior guidance function and have posterior interference at protrusion were selected as a experimental group(Group 2). Electronic pantograph, Denar Pantronic (Denar Corp., U.SA.), was used to record mandibular movement. Pantronic survey was performed by using an arbitrary hinge axis according to manufacturer's direction. Of the Pantronic recordings, immediate side shift (ISS), progressive side shift (PSS), orbiting condylar path (ORB), protrusive condylar path (PRO) between two groups were compared and analysed. The results were as follows: 1. The average protrusive and orbiting condylar inclination of mandibular prognathic patient$(28.44^{\circ},\;36.94^{\circ})$ was significantly lower than those of normal group$(40.15^{\circ},\;48.00^{\circ})$ (P<0.01). 2. There was no statistically significant difference between .the average immediate and progressive side shift of mandibular prognathic patient $(0.37mm,\;6.19^{\circ})$ and those of normal group$(0.52mm.\;5.96^{\circ})$ (P>0.01). 3. The significant correlation was found between orbiting condylar inclination and protrusive condylar inclination.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.46-51
• /
• 2004

Talon cusp is cusp-like structure that develops additionally in crown of anterior tooth. And it is one of dental anomalies. Talon cusp can cause various diagnostic, functional, aesthetic problems depending on the size and configuration of cusp. there is a tendency for caries to occur in the developmental grooves, and advanced attrition, periodontal problems, irritation the tongue and temporomandibular pain, occlusal interference and displacement of affected tooth may result. Therefore, early diagnosis and appropriate treatment of each case is important so that it minimize local problems, such as caries, periodontal diseases, and malocclusion. These cases which are in permanent and primary anterior teeth are about gradual reduction forming reparative dentine and complete reduction of talon cusp and root canal therapy which is an alternative and effective form of treatment when gradual reduction of talon cusp may not be possible.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.127-129
• /
• 2011

Purpose: Nasotracheal or oral intubation procedure is widely used for facial bone fractures. However, during the operation intubated tube can interfere or obstruct the view of the operator. We authors used a modified submental intubation method in panfacial bone fracture patients for intact airway and the operation view. Methods: After intravenous induction of anaesthesia, traditional orotracheal tubation was done. A horizontal incision was made 2 cm from the midline, 2 cm medial to and parallel with the mandible in the submental region. 1 In order to approach to the floor of the oral cavity, a haemostat was pushed through the soft tissues. A chest tube front cover was applied to the intubation tube and the tube was inserted through the submental tunnel. Orotracheal tube was disconnected and pulled back through the soft tissue and secured with a suture. Results: The procedure took about 30 minutes and there were no problems during the intubation. Intraoral manipulation and occlusal checks were free without any interference. Extubation was also easily done without any complications such as lung aspiration, infection, hematoma, or fistula. Conclusion: Submental endotracheal intubation is fast, safe, easy to use and free from the concern about the tube being pull back again. Conventional submental intubations are being held without any coverage of the tip. We authors applied the modified method to the trauma patients and obtained satisfactory results. From the above advantages, modified submental intubation can be widely available not only in fractured patients, but also in aesthetic or orthognathic surgeries.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.2
• /
• pp.158-166
• /
• 2009

The application of CT with basis on 3 dimensional-reconstruction is getting more widely practiced. With the data obtained from cone-beam computed tomography(CBCT), not only the diagnosis of the patient with skeletal abnormality but also the virtual simulation of the orthognathic surgery were performed and its application would be popular in orthodontic field. We reported a case, a 19-year old man who was diagnosed mandibular prognathism and required orthognatic surgery. In this case, the virtual orthognathic surgery was simulated and surgical wafer was fabricated by using CBCT data. That wafer was applied the actual orthognathic surgery. After preoperative orthodontic treatment, we prepared surgery as follows. : (l)Acquisition of 3D image data, (2)Reconstruction of 3-dimensional virtual model, (3)Virtual model surgery, (4)Extraction of stere-olithographic image, (5)Check-up for occlusal interference, (6)Fabrication of surgical stent by stereolithography. Bilateral sagittal split ramus osteotomy was operated and used stereolithographic surgical stent. 1 month later, we superimposed CBCT datas of virtual surgery and that of actual surgery, and then compared the result. CT data's application for othognathic surgery yielded satisfactory outcomes.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.549-558
• /
• 2001

This study was undertaken to demonstrate the forces in the maxillary alveolar bone generated by the activation of the maxillary posterior crossbite appliance In the treatment of posterior buccal crossbite caused by buccal ectopic eruption of the maxillary second molar. A photoelastic model was fabricated using a Photoelastic material (PL-3) to simulate alveolar bone and ivory-colored resin teeth. The model was observed throughout the anterior and posterior view in a circular polariscope and recorded photographically before and after activation of the maxillary posterior crossbite appliance. The following conclusions were reached from this investigation : 1. When the traction force was applied on the palatal surface of the second molar, stresses were concentrated at the buccal and palatal root apices and alveolar crest area. The axis of rotation of palatal root was at the root apex and that of the buccal root was at the root li4 area. In this result, palatal tipping and rotating force were generated. 2. When the traction force was applied on the buccal surface of the second molar, more stresses than loading on the palatal surface were observed in the palatal and buccal root apices. Furthermore, the heavier stresses creating an intrusive force and controlled tipping force were recorded below the buccal and palatal root apices below the palatal root surface. In addition, the axis of rotation of palatal root disappeared whereas the rotation axis of the buccal root moved to the root apex from the apical 1/4 area. 3. When the traction force was simultaneously applied on the maxillary right and left second molars, the stress intensity around the maxillary first molar root area was greater than the stress generated by the only buccal traction of the maxillary right or left second molar. As in above mentioned results, we should realize that force application on the palatal surface of second molars with the maxillary posterior crossbite appliance Produced rotation of the second molar and palatal traction, which nay cause occlusal Interference. That is to say, we have to escape the rotation and uncontrolled tipping creating occlusal interference when correcting buccal posterior crossbite. For this purpose, we recommend buccal traction rather than palatal traction force on the second molar.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.105-117
• /
• 1997

This investigation examined the effect of lateral shift of mandible from functional occlusal interference on the growth of mandible and the growth pattern of mandible shown after the removal of occlusal interference. The followings were performed with the results below : the changes in mandible and condylar cartilage were studied in the experimental group with upper right, lower left incisors cut for 2 and 4 weeks- an 4-week-old rats and the experimental group which had cut for 4 weeks and suspended for 2 weeks. 1. In the 2-week experimental group, the left mandibular length, condylar length, mandibular height and condylar area seemed smaller than those on the right and the normal group ; the right mandibular length and condylar area were smaller than the normal group. 2. In the 4-week experimental group, left condylar area was smaller than the right, but due to the quick changes in adaptability of left mandible, right and left mandibular lengths were similar. compared with the normal group, however, mandibular length and condylar area still remained small. 3. In the 6-week experimental group, the left and the right appeared similar with the mandibular length remaining still shorter than the normal group. 4. In the sagittal plane, the proliferation of the cartilage layers of the left condylar cartilage of the 2-week group appeared to have general repression compared with the right and the normal group. The right side also showed repressed growth compared with the normal group. In the 4 and 6-week groups, however, it was similar to the normal group. 5. In condylar cartilage volume, no significant difference was noted in the comparisions of left and right of the experimental group, nor in the comparison of the same sides of experimental wand normal groups. Based on the above, in case of contralateral incisal cutting in rats, it was observed that the growth of mandible and condyle of the cutting side was repressed, at the same time, the quick adaptability led to similar changes of growth in left and right mandibles. But judging from the similar phenomena throughout the whole experimental period in the changes of condylar cartilage volume in the experimental, right and left, and normal groups, the general overall growth of condylar cartilage was found unrepressed. It was also recognized that the growth of condylar cartilage can take in various directions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.628-635
• /
• 2000

The purpose of this study was to evaluate the result after 2-phase surgical-orthodontic treatment without preoperative orthodontic treatment for the skeletal Cl III malocclusion patient and to obtain an adequate protocol on the bases of this result. This retrospective study of ten patients who underwent 2-phase treatment were done to evaluate 1) the surgical stability and relapse pattern 2) the facial esthetics 3) the TMJ problem 4) the total time of the treatment. Results were followed : 1) The horizontal relapse of the mandible was 26.8% and didn't show significant differences compared to the conventional 3-phase treatment. But, it was considered that this amount of relapse was the sum of true relapse and autoratation of mandible due to decreased vertical dimension during orthodontic treatment. 2) It was estimated that there's no difference on the ratio of anterior facial height between the subjects and the normal patients. On the horizontal analysis, the mandible of the subjects was located more anteriorly than that of the normal patients. This result showed that there was a need for the accurate preoperative esthetic evaluation and the additional methods for reducing the relapse due to the occlusal interference. 3) Wide variation was noted on the TMJ symptoms of the subjects, however, it was estimated that there's no significant differencees of symptoms compared to that of the conventional 3-phase treatment on literatures. 4) The average of the overall period of treatment was 20.8 months and we obtained reduction of the treatment time compaired to 3-phase treatment on many literatures. Most of the results of this study were similar to the findings of the 3-phase treatment(preoperative orthodontic-orthognathic surgery-postoperative orthodontic), but total time of the treatment was shorter in patients with 2-phase treatment than in those with the conventional 3-phase treatment. With 2-phase treatment, we experienced many advantages compared to the conventional method considering that it was favarable conditions for the teeth, it had the flexibility for the treatment, and it could be the adequate treatment approach for the stomatognathic system. Although this retrospective pilot study had some limitations, due to small samples, the authors would hope that it could serve as a guide for the future researches, and the clinical applications.