• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.388-395
• /
• 2013

PURPOSE. The purpose of this study was to estimate the effects of occlusal stability to identify action mechanisms of mouthguards, known to have a modulatory effect on limb muscle function. MATERIALS AND METHODS. This study included 20 male subjects to perform the isokinetic muscle tests and the Wingate anaerobic power test on both knee joints under five closed-mouth conditions: without or with 4 types of mouthguards with thickness of 2 mm based on premolar area: (1) full-coverage, (2) anterior partial-coverage, (3) right posterior partial-coverage, and (4) left posterior partial-coverage. The obtained results were subjected to One-way ANOVA with repeated measures, followed by post hoc test of the contrast method (${\alpha}$=.05). RESULTS. There was no significant difference between the closed position with and without a full-coverage mouthguard in all variables. However, significant differences were observed between with and without a partial-coverage mouthguard in muscular endurance during extension of the left knee, muscular power and endurance during flexion of the right knee. Additionally, significant differences were found between occlusal states with full- and partial-coverage mouthguards in muscular power and endurance during extension of the left knee. CONCLUSION. These findings indicate the elevation of vertical dimension by 2 mm or the inducement of occlusal stability had little effect on isokinetic muscle strength and anaerobic performance, while uneven distribution of occlusal force might have some positive effects.

• 대한치과기공학회지
• /
• 제11권1호
• /
• pp.115-120
• /
• 1989

Many attempts for the compfrt, esthetics and improvement of Masticatory function of the patients with removable prosthesis have been made for several decades. The search for the ideal denture occlusion has been going on in an effort to find the tooth form which provides maximum denture stability and masticatory efficiency without damaging the health of the underlying bone. For the purpose, the basic concept of lingualized occlusion were suggested by payne(1941) and pound(1973) discussed a similar occlusal concept and used term " lingualized occlusion." The purpose of this literature study is to clarify and amplify a method to achieve bilateral balanced occlusion with the occlusal arrangement termed " lingualized occlusion." Lingualized occlusion can be achieved by use of anatomic teeth for the mandibular denture. Lingualized occlusion can be used in most denture combination. It is particulary helpful when the patient places high priority on esthetics but a nonanatomic occlusal scheme is indicated by oral conditions such a severe alveolar resorption, a class II jaw relationship or displaceable supporting tissue. Advantages of lingualized occlusion are summarized as follows : 1) Most of the advantages attributed to both the anatomic and nonanatomic forms are retained. 2) Cusp form is more natural in appearance compare to nonanatomic tooth form. 3) Good pnetration of the food bolus is possible. 4) Bilateral mechanical balanced occlusion is readily obtained for a region around arotric relation. 5) Bertical forces are centralized on the mandibular teeth. Lingualized occlusion provides a useful combination of several occlusal concept. Many. advantages of anatomic and nonanatomic occlusions are accomplished but the lingualized occlusal concept is not is not a panacea, and all other procedures still must be carefully excuted.

• 구강회복응용과학지
• /
• 제36권2호
• /
• pp.112-120
• /
• 2020

목적: 본 연구의 목적은 하악 구치부에서 두 가지 서로 다른 부하 양식에 따른 생역학적 결과를 비교하는 것이었다. 연구 재료 및 방법: 하악 구치부 자연치열 및 임플란트 모델을 제작하였으며, 임의로 부여된 교합과 아큐라 디지털 교합측정장치로 획득한 실제 교합 두 가지 하중 조건을 부여하였다. 임의로 부여된 교합의 경우, 총 100 N 하중을 교합점에 균일하게 배분하였으며, 실제 교합의 경우는 총 100 N 하중을 아큐라(Accura, Dmetec Co. Ltd., Seoul, Korea)로 측정된 정보에 근거하여 교합점에 차등 배분하였다. 하중에 대한 응력과 변위를 유한요소해석을 이용하여 분석하였다. 결과: 유한요소해석 결과, 서로 다른 부하 조건 하에서 등가응력 및 변위 모두 상당한 차이를 보였다. 결론: 유한요소해석 수행 시 정확한 측정에 기반한 실제 교합에 가까운 부하 조건을 재현하는 것이 추천된다.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.639-646
• /
• 1998

To evaluate the effect of interface conditions and retention grooves in the Class V composite resin restoration of the maxillary first premolar, the distribution of the values of stress and displacement was analyzed with the two-dimensional finite element method. The results were obtained as follows : 1. Boundary elements and Stiffness values could be used as the interface parameters in the, finite element method. 2. The amount of restriction of the displacement at the cervical margin by placing a retention groove at the cervical wall was about three times as high as that by placing a retention groove at the occlusal wall. 3. Because of the relative amount of tensile components of the stress values in the bucco-lingual direction, the possibility of dislocation of the restoration was much higher at the cervical margin than at the occlusal margin. 4. It might be recommended that both occlusal and cervical retention grooves be used routinely, but if one, it be placed at the cervical wall.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.371-380
• /
• 2017

PURPOSE. The aim of this study is to evaluate and compare the stress distribution in Locator attachments in mandibular two-implant overdentures according to implant locations and different loading conditions. MATERIALS AND METHODS. Four three-dimensional finite element models were created, simulating two osseointegrated implants in the mandible to support two Locator attachments and an overdenture. The models simulated an overdenture with implants located in the position of the level of lateral incisors, canines, second premolars, and crossed implant. A 150 N vertical unilateral and bilateral load was applied at different locations and 40 N was also applied when combined with anterior load at the midline. Data for von Mises stresses in the abutment (matrix) of the attachment and the plastic insert (patrix) of the attachment were produced numerically, color-coded, and compared between the models for attachments and loading conditions. RESULTS. Regardless of the load, the greatest stress values were recorded in the overdenture attachments with implants at lateral incisor locations. In all models and load conditions, the attachment abutment (matrix) withstood a much greater stress than the insert plastic (patrix). Regardless of the model, when a unilateral load was applied, the load side Locator attachments recorded a much higher stress compared to the contralateral side. However, with load bilateral posterior alone or combined at midline load, the stress distribution was more symmetrical. The stress is distributed primarily in the occlusal and lateral surface of the insert plastic patrix and threadless area of the abutment (matrix). CONCLUSION. The overdenture model with lateral incisor level implants is the worst design in terms of biomechanical environment for the attachment components. The bilateral load in general favors a more uniform stress distribution in both attachments compared to a much greater stress registered with unilateral load in the load side attachments. Regardless of the implant positions and the occlusal load application site, the stress transferred to the insert plastic is much lower than that registered in the abutment.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.219-237
• /
• 2003

he purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown, and 0.5mm width chamfer finish lines on the maxillary first premolar. 30 sound maxillary first premolars were selected and then storaged in 5% NaOCl and saline. 15 teeth were performed preparation for each group(1.0mm rounded shoulder, 0.5mm chamfer). After 30 stone dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the natural teeth. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co., Germany)was used to measure the fracture strength, with stress loading on the occlusal surface between buccal and lingual cusp. And also, three-dimensional finite element model was used to measure the stress distribution with two types of the finish lines(1.0mm rounded shoulder, 0.5mm chamfer) and two loading conditions(both buccal and lingual cusp inclination, lingual cusp inclination only). The result of the this study were as follows. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(842N) showed higher value than that of the chamfer(590N) (p<0.05). In the three dimensional finite element analysis of all ceramic crown, metal die and natural teeth model did not show any differences in stress distribution between finish lines. Generally, when force was loaded on the occlusal inclination of buccal and lingual cusp, the stress was concentrated on the loading point and the central groove of occlusal surface. When force was loaded only on the occlusal inclination of lingual cusp, the stress was concentrated on the lingual finish line and loading point.

• Journal of Oral Medicine and Pain
• /
• 제30권3호
• /
• pp.361-373
• /
• 2005

교합장치요법은 측두하악장애 환자의 증상과 징후를 감소시키는데 매우 효과적인 방법으로 밝혀져 있다. 교합장치의 저작효율에 관한 보고는 아직 없는 실정이다. 이 연구의 목적은 정상인에서 실험적으로 자연치열과 비교한 교합안정장치의 저작 효율을 조사하고, 개선된 저작 효율을 가진 변형된 교합안정장치를 개발하는 것이었다. 열한명의 연구대상자(평균 연령 25.3세, 연령 범위 23-33세)가 실험에 참여했다. 이 중 남자는 6명, 여자는 5명 이었다. 이들은 완전하거나 거의 완전한 자연치열을 가지고 있고 측두하악장애의 증상과 징후가 없는 건강한 사람들이었다. 기존의 편평한 교합면이 있는 상악 교합안정장치(FSA) 및 교합면에 부가적으로 해부학적인 구조가 있는 변형된 교합안정장치(ASA)의 2종의 교합장치를 각 대상자마다 제작하였다. 자연치열, ASA 및 FSA의 3가지 저작 조건에서 연구대상자들이 시험식품으로 선택된 땅콩을 저작하도록 하였다. 1분간의 저작기간 동안 저작주기 회수를 세었다. 저작된 땅콩 식괴를 회수하고 조직감 분석을 통해 경도를 측정하였다. 경도와 저작주기 회수에 대하여 통계분석을 시행하였으며, 다음과 같은 결과를 얻었다. 1. FSA의 저작효율은 자연치열의 38.6%에 해당하였다. ASA의 저작효율은 자연치열의 78.2%에 해당하였다. 2. 자연치열의 저작조건에서의 저작주기 회수는 초당 1.5회로 측정되었으며, 이는 ASA와 FSA의 조건에서 약 90%로 감소되었다. 이러한 결과는 ASA가 측두하악장애에서의 치료효과뿐만 아니라 향상된 저작기능을 수행할 수 있도록 함을 보여주었다. TMD 환자의 치료에 ASA의 임상적 사용을 긍정적으로 고려할 수 있을 것이다.

• Journal of Oral Medicine and Pain
• /
• 제36권3호
• /
• pp.187-197
• /
• 2011

측두하악관절장애는 저작근, 측두하악관절, 주변 구조물 또는 모두를 포함하는 다수의 임상문제를 포함하는 용어이다. 근막동통은 측두하악관절장애 중 저작근 장애의 한 종류로, 근막 발통점에 의해 발생하는 감각, 운동, 자율신경 증상이다. 측두하악관절장애와 근막동통의 원인에 대한 논쟁이 지속되어왔다. 특히 교합 원인은 오랫동안 논쟁의 핵심이었으며, 많은 노력에도 불구하고 교합원인에 대한 연구는 상반된 결과를 보였다. 이런 논쟁은 대부분이 측두하악관절장애 본연의 복잡성에서 기인하지만, 부적절하고 부적당한 연구설계, 선정기준, 연구방법 또한 중요한 역할을 한다. 최근에 교합분석시 시간과 상대적 힘이 측정가능한 컴퓨터 교합분석 기기인 T-Scan II가 소개되었다. 일부 저자들은 T-Scan II를 이용하여 이개시간 개념 및 연장된 구치부 이개시간과 근막통증의 연관성에 대하여 제안하였다. 그러나 T-Scan II를 이용한 기존의 연구들은 근막통증에 대한 정확한 진단 기준을 제시하지 못하였으며, 대조군과의 비교 부재 및 다른 많은 문제점을 가지고 있었기 때문에 신뢰할 만하지 못하다. 이번 연구의 목적은 컴퓨터 교합분석 기기인 T-Scan II을 이용하여 30명의 실험군을 선택하고 이를 38명의 대조군과 비교함으로써, 근막통증과 구치부 이개시간과의 연관성을 평가하는 것이다. 통계적으로 분석된 결과는 다음과 같다: 1. 반복 측정한 이개시간의 Cronbach ${\alpha}$ 계수는 0.92 였다. 2. 반복 측정한 이개시간 평가시 양측에서 실험군과 대조군 사이 유의성 있는 차이를 보이지 않았다. 3. 이개시간 평가시 좌측 우측 사이에 유의성 있는 차이를 보이지 않았다. 이상의 결과로부터 근막통증과 이개시간 사이에는 관련성이 없는 것으로 판단된다. 따라서 근막통증을 치료하기 위하여 이개시간을 줄이는 비가역적인 치료는 적절치 않다. 향후의 연구에 있어서, 여러 교합요소와 헬키모 지수 등을 이용하여 증상의 정량화를 고려한 보다 통제된 대규모 환자 집단에 대한 연구가 필요할 것으로 사료된다.

• 대한치과교정학회지
• /
• 제19권2호
• /
• pp.109-120
• /
• 1989

We tend to consider only static occlusion such as molar relationship, canine key, and interdigitation at finishing stage. Of course, this static occlusion is important for post-orthodontic stability. But we should remember that mandible is always on the move during its various functions. If no pressure or too much pressure is put on during its functions, untoward tooth movement could occur. And tooth mobility, periodontitis, wear facet, bruxism, and far worse temporomandibular disorder could occur. After many studies have been done on what is a desirable occlusal scheme to strengthen post-orthodontic stability, today, "mutually protective occlusion" is recommended. If an orthodontist does not have understanding about this occlusal scheme during orthodontic treatment, the following conditions will be resulted after orthodontic treatment. I. Centric discrepancy 1. centric prematurity 2. sunday bite 3. molar fulcrum II. Eccentric discrepancy 1. posterior interference 2. anterior interference If we have deep understanding about these discrepancies that can happen after orthodontic treatment and their causes, corrections, and especially preventions against them, post-orthodontic stability could be strengthened and further temporomandibular disorder could be prevented.

• 대한치과의사협회지
• /
• 제58권8호
• /
• pp.513-520
• /
• 2020

Occasionally, complete dentures constructed in accord with the best clinical and laboratory procedures fail to serve successfully. These failures probably result from present ignorance of the occlusion and functions of living tissues. Nonetheless, in each case, the whole treatment procedure, both clinical and laboratory, must be reexamined in order to ascertain the point of failure. One can employ a technique more intelligently, and often improve on it, if the reasons for its use are known. When one is guided only by a recipe, the outcome will be doubtful whenever conditions are not the same as in the recipe. In this manuscript, occlusal consideration of edentulous patients will be discussed thoroughly.