• 한국소음진동공학회논문집
• /
• 제18권2호
• /
• pp.169-176
• /
• 2008

This paper presents optimal design of controllable magnetorheological(MR) shock absorbers for passenger vehicle. In order to achieve this goal, two MR shock absorbers (one for front suspension; one for rear suspension) are designed using an optimization methodology based on design specifications for a commercial passenger vehicle. The optimization problem is to find optimal geometric dimensions of the magnetic circuits for the front and rear MR shock absorbers in order to improve the performance such as damping force as an objective function. The first order optimization method using commercial finite element method(FEM) software is adopted for the constrained optimization algorithm. After manufacturing the MR shock absorbers with optimally obtained design parameters, their field-dependent damping forces are experimentally evaluated and compared with those of conventional shock absorbers. In addition, vibration control performances of the full-vehicle installed with the proposed MR shock absorbers are evaluated under bump road condition and obstacle avoidance test.

• 한국산업융합학회 논문집
• /
• 제17권4호
• /
• pp.217-226
• /
• 2014

Since the world has changed to a society of 21st century high-tech industries, the modern people have become reluctant to work in a difficult and dirty environment. Therefore, unmanned technologies through robots are being demanded. Now days, effects such as voice, control, obstacle avoidance are being suggested, and especially, voice recognition technique that enables convenient interaction between human and machines is very important. In this study, in order to conduct study on the stable motion control of the robot system that has mobile-manipulator structure and is voice command-based, kinetic interpretation and dynamic modeling of two-armed manipulator and three-wheel mobile robot were conducted. In addition, autonomous driving of three-wheel mobile robot and motion control system of two-armed manipulator were designed, and combined robot control through voice command was conducted. For the performance experiment method, driving control and simulation mock experiment of manipulator that has two-armed structure was conducted, and for experiment of combined robot motion control which is voice command-based, through driving control, motion control of two-armed manipulator, and combined control based on voice command, experiment on stable motion control of voice command-based robot system that has mobile-manipulator structure was verified.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.62-65
• /
• 2003

When a mobile robot moves around autonomously without man-made corrupted bye landmarks, it is essential to recognize the placement of surrounding objects especially for self localization, obstacle avoidance, and target classification and localization. To recognize the environment we use many Kinds of sensors, such as ultrasonic sensors, laser range finder, CCD camera, and so on. Among the sensors, ultra sonic sensors(sonar)are unexpensive and easy to use. In this paper, we analyze the sonar data and propose a method to recognize features of indoor environment. It is supposed that the environments are consisted of features of planes, edges, and corners, For the analysis, sonar data of plane, edge, and corner are accumulated for several given ranges. The data are filtered to eliminate some noise using the Kalman filter algorithm. Then, the data for each feature are compared each other to extract the character is ties of each feature. We demonstrate the applicability of the proposed method using the sonar data obtained form a sonar transducer rotating and scanning the range information around a indoor environment.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2902-2912
• /
• 1994

The ultrasonic array sensor system, consisting of one transmitter and fourreceivers instead of the traditional combination of a transmitter and a receiver is proposed in order to identify the location of objects. From the theoretical analysis and the experimental results, it is found that this new array sensor system could derive the information on the position of objects accurately, while the traditional sensor system could provide only the informatioin on the distance to objects. This sensor system is used to develop a sonar-based local mapping algorithm. The local map is used to find the existence of possible gates, through which the mobile robots can pass, and to select the suitable one in order for the robots to reach the goal safely in the presence of obstacles. The performance of the proposed local map algorithm is demonstrated experimentally in a small working area with several obstacles. It is found that the quality of the resulting local map is sufficient for the avoidance of collisions between the robots and obstacles and for the selection of the suitable gate leading to the goal. It is also shown that the global map of the working area could be obtained by integrating several local maps constructed from different locations and that it matches the actual layout of the working area well.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2001년도 춘계학술대회 학술발표 논문집
• /
• pp.136-139
• /
• 2001

This paper develops a sensor based navigation method that utilizes fuzzy logic and the Dempster-Shafer evidence theory for mobile robot in uncertain environment. The proposed navigator consists of two behaviors: obstacle avoidance and goal seeking. To navigate reliably in the environment, we make a map building process before the robot finds a goal position and create a robust fuzzy controller. In this paper, the map is constructed on a two-dimensional occupancy grid. The sensor readings are fused into the map using D-S inference rule. Whenever the robot moves, it catches new information about the environment and replaces the old map with new one. With that process the robot can go wandering and finding the goal position. The usefulness of the proposed method is verified by a series of simulations. This paper deals with the fuzzy modeling for the complex and uncertain nonlinear systems, in which conventional and mathematical models may fail to give satisfactory results. Finally, we provide numerical examples to evaluate the feasibility and generality of the proposed method in this paper.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.946-951
• /
• 2009

The small multi-jointed robots for most education are developed with the way of firmware. But the firmware may be very difficult to develop as gradually increasing throughputs and control routines. Due to limit of firmware we try to use on RTOS, but hard to adapt on the small multi-jointed robots. It would be hard to install RTOS into the small multi-jointed robots because of the size capacity of RTOS, and lack of libraries for control of the particular hardware. Moreover, even its RTOS with many functions causes its to make overheads scheduling, TCB (Task Control Block), and task states. Also to keep maintenance of RTOS, it is composed of components for the whole structure of my proposed RTOS. Additionally, We provided with libraries of servo motor and sensor control and developed RMS (Rate Montonic scheduler) to handle tasks on real time and reduce overheads. Therefore, It is possible to work the fixed priority and task preemptive way. We show one example of the multi-jointed robot installed with my proposed RTOS, which shows to obstacle avoidance and climbing up the slope.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권2호
• /
• pp.85-92
• /
• 2003

In this paper, we propose a method to evaluate performances of mobile personal robots. A set of performance measures is proposed and the corresponding evaluation methods are developed. Different from industrial manipulators, personal robots need to be evaluated with its mobility, navigation, task and intelligent performance in environments where human beings exist. The proposed performance measures are composed of measures for mobility including vibration, repeatability, path accuracy and so on, as well as measures for navigation performance including wall following, overcoming doorsill, obstacle avoidance and localization. But task and intelligent behavior performances such as cleaning capability and high-level decision-making are not considered in this paper. To measure the proposed performances through a series of tests, we designed a test environment and developed measurement systems including a 3D Laser tracking system, a vision monitoring system and a vibration measurement system. We measured the proposed performances with a mobile robot to show the result as an example. The developed systems, which are installed at Korea Agency for Technology and Standards, are going to be used for many robot companies in Korea.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권1호
• /
• pp.270-286
• /
• 2012

In this paper, we propose a novel routing protocol called the Cartography Enhanced OLSR (CE-OLSR) for multi hop mobile ad hoc networks (multi hop MANETs). CE-OLSR is based on an efficient cartography gathering scheme and a stability routing approach. The cartography gathering scheme is non intrusive and uses the exact OLSR reduced signaling traffic, but in a more elegant and efficient way to improve responsiveness to the network dynamics. This cartography is a much richer and accurate view than the mere network topology gathered and used by OLSR. The stability routing approach uses a reduced view of the collected cartography that only includes links not exceeding a certain distance threshold and do not cross obstacles. In urban environments, IEEE 802.11 radio signals undergo severe radio shadowing and fading effects and may be completely obstructed by obstacles such as buildings. Extensive simulations are conducted to study the performances of CE-OLSR and compare them with those of OLSR. We show that CE-OLSR greatly outperforms OLSR in delivering a high percentage of route validity, a much higher throughput and a much lower average delay. In particular the extremely low average delay exacerbated by CE-OLSR makes it a viable candidate for the transport of real time data traffic in multi hop MANETs.

• 한국정보통신학회논문지
• /
• 제25권4호
• /
• pp.549-557
• /
• 2021

본 연구는 교육용 로봇 중 한 종류인 스마트로봇을 대상으로 기존의 OID 센서 환경을 이용하되 주행의 문제점을 프로그램으로 처리하는 것을 제안 하고자 한다. 주행 정보를 가지고 있는 지도환경, 위치인식, 경로계획, 장애물 회피 및 경로 재설정을 중심으로 주행 테스트 환경을 구축했으며 평균적인 최종 오류 률이 아니라 오류가 증가하는 시점을 재보정의 순간으로 잡아야 한다는 가정을 통해 실험을 진행했다. 그 과정을 통해 선행실험에 비해 안정적인 주행 결과를 얻었다. 본 연구가 현재 판매되는 저가형 센서를 장착한 교육용 로봇들의 주행 성능을 올릴 수 있는 개발방법이 될 것이라 본다.

• 대한임베디드공학회논문지
• /
• 제17권2호
• /
• pp.123-128
• /
• 2022

This paper proposes a mobile robot platform for education that can experiment with various autonomous driving algorithms such as obstacle avoidance and path planning. The platform consists of a robot module and a remote controller module, both of which are based on the Arduino Nano 33 IoT embedded board. The robot module is designed as a differential drive type using two encoder motors, and the speed of the motor is controlled using PID control. In the case of the remote controller module, a command to control the robot platform is received with a 2-axis joystick input, and an elliptical grid mapping technique is used to convert the joystick input into a linear and angular velocity command of the robot. WiFi and Zigbee are used for communication between the robot module and the remote controller module. The proposed robot platform was tested by measuring and comparing the linear velocity and angular velocity of the actual robot according to the linear velocity and angular velocity commands of the robot generated by the input of the joystick.