• Ocean Systems Engineering
• /
• v.4 no.4
• /
• pp.309-325
• /
• 2014

Geotextile tubes are basically a huge sack filled with sand or dredged soil. Geotextile tubes are made of permeable woven or non-woven synthetic fibers (i.e., polyester or PET and polypropylene or PP). The geotextile tubes' performances in strength, dewatering, retaining solid particles and stacked stability have been studied extensively in the past. However, only little research has been done in the observation of the deformation behavior of geotextile tubes. In this paper, a large-scale apparatus for geotextile tube experiment is introduced. The apparatus is equipped with a slurry mixing station, pumping and delivery station, an observation station and a data station. For this study the large-scale apparatus was utilized in the studies regarding the stresses on the geotextile and the deformation behavior of the geotextile tube. Model tests were conducted using a custom-made woven geotextile tubes. Load cells placed at the inner belly of the geotextile tube to monitor the total soil pressure. Strain gauges were also placed on the outer skin of the tube to measure the geotextile strain. The pressure and strain sensors are attached to a data logger that sends the collected data to a desktop computer. The experiment results showed that the maximum geotextile strain occurs at the sides of the tube and the soil pressure distribution varies at each geotextile tube section.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.36.3-37
• /
• 2015

4C39.25 (0923+392) is a distant radio loud AGN placed at redshift 0.695. The motivation of our work is peculiar properties 4C39.25. Firstly, it has a conspicuous distinction of jet direction between kilo-parsec scale observation made by VLA (Kollgaard et al. 1990) and the parsec scale observation by VLBA (Kellermann et al. 1998). This might indicate episodic-jet activity which recently turned on. This object currently shows two stationary compact parsec-scale components which are bright jet component on east and less luminous core on west. Also, it is known that there have been superluminal jet components which are flowing from the core toward east, and then merging with the bright jet component (Marscher et al. 1991, Alberdi et al. 2000, Lister et al. 2013). Although 4C39.25 seems to be a blazar-like source having broad emission lines (SDSS) and superluminal motion, its property that jet component is brighter than the core is different from ordinary blazars. Furthermore, it has young radio galaxy-like properties such as non-variation in total flux (Alberdi et al. 1997, 2000, MOJAVE database) and high frequency peak at spectral energy distribution (Orienti et al 2007). Such complex properties led us to make recent observations to reveal precise properties and new changes of the source. We used Korean VLBI Network (KVN) and VLBI Exploration of Radio Astronomy (VERA) Array (KaVA) which provide high-frequency (23GHz and 43GHz) and high spatial resolution (1.2mas and 0.6mas). Therefore, this system is suitable for morphological and physical research on parsec scale structure. We present results for several epochs observed during 2013 to 2014, mainly focusing on morphological changes of 4C39.25 using KaVA images.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.3
• /
• pp.171-179
• /
• 2016

In order to study correlation of the propeller cavitation performance between a full-scale ship and a model ship for the MR Tanker, the full-scale ship and the model tests were conducted. The full-scale ship test is composed of cavitation observation, pressure fluctuation and noise measurements, which are conducted using 2 observation windows and 8 pressure transducers installed inside the full-scale ship above the propeller. The model test in the Large Cavitation Tunnel(LCT) was conducted at the same conditions as that of the full-scale ship and its results are compared with those of the full-scale ship. Through the model-ship correlation analysis, it is considered that the experimental technique for the MR Tanker class ship was verified in LCT.

• Journal of Korean Elementary Science Education
• /
• v.18 no.1
• /
• pp.65-73
• /
• 1999

The purpose of this study is tile development of tile observation Assessment criteria that is used to assess manipulative skills in elementary science. The procedures of developing observation Assessment criteria are as follows. First, we investigated the actual condition about science process skills assessment with tile questionnaire. Second, we selected 7 experimental apparatus through the analysis of the science textbooks. The selected experimental apparatus are dropper, alcohol lamp, thermometer, test tube, filtering device, able balance, graduated cylinder Third, the observation Assessment criteria arc developed through tile analysis of the related experimental textbooks, the demonstrations, and the questionnaire, Forth, tile validity is verified by science education specialists and graduate students who major in science education. Fifth, the first jilter-rater agreement is investigated in the result of the field with observation criteria of which the validity was verified. The second inter-rater agreement is investigated through the revision and the addition of the criteria with the low agreement. In result, the jilter-rater agreement ranged from 0.86 to 0.98. One of the major problems in observation assessment is the rater's subjective viewpoint. So, this research shows a more specified scale and criteria for the assessment. This suggests that the observation Assessment criteria developed in tile study satisfies the high reliability and validity requirements. Considering the results, this criteria call be used effectively for assessing manipulative skills of elementary school students.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.5
• /
• pp.682-691
• /
• 2013

The aerosol extinction vertical profile and surface visibility have been derived from the Microtops-II sunphotometer observation during the winter 2011 intensive observation period (IOP) at Seoul, Korea. Using models of degradation of aerosol optical thickness (AOT) and aerosol scale height, we have performed extinction-visibility modulation to determine the height dependent aerosol extinction and visibility. It is shown that the aerosol loading is relatively low during IOP (mean $AOT_{550}=0.22{\pm}0.08$, ${\AA}$ngstr$\ddot{o}$m exponent=$1.14{\pm}0.26$). Modeled extinction by use of Microtops II sunphotometer data shows good agreement with measurements by the Multi-wavelenth Polarization Lidar (MPoLAR), and the derived surface visibility are consistent with data from the transmissometer. These results emphasize the use of a vertically resolved extinction from AOT to predict visibility conditions at ground level.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.6
• /
• pp.600-618
• /
• 2014

The metadata for urban meteorological observation is standardized through comparison with those established at the World Meteorological Organization and the Korea Meteorological Administration to understand the surrounding environment around the sites exactly and maintain the networks and sites efficiently. It categorizes into metadata for an observational network and observational sites. The latter is again divided into the metadata for station general information, local scale information, micro scale information, and visual information in order to explain urban environment in detail. The metadata also contains the static information such as urban structure, surface cover, metabolism, communication, building density, roof type, moisture/heat sources, and traffic as well as the update information on the environment change, maintenance, replacement, and/or calibration of sensors. The standardized metadata for urban meteorological observation is applied to the Weather Information Service Engine (WISE) integrated meteorological sensor network and sites installed at Incheon area. It will be very useful for site manager as well as researchers in fields of urban meteorology, radiation, surface energy balance, anthropogenic heat, turbulence, heat storage, and boundary layer processes.

• The Journal of Korea Robotics Society
• /
• v.7 no.1
• /
• pp.29-34
• /
• 2012

This paper suggests a new observation model for Extended Kalman Filter based Simultaneous Localization and Mapping (EKF-SLAM). Since the EKF framework linearizes non-linear functions around the current estimate, the conventional line model has large linearization errors when a mobile robot locates faraway from its initial position. On the other hand, the model that we propose yields less linearization error with respect to the landmark position and thus suitable in a large-scale environment. To achieve it, we build up a three-dimensional space by adding a virtual axis to the robot's two-dimensional coordinate system and extract a plane by using a detected line on the two-dimensional space and the virtual axis. Since Jacobian matrix with respect to the landmark position has small value, we can estimate the position of landmarks better than the conventional line model. The simulation results verify that the new model yields less linearization errors than the conventional line model.

• Atmosphere
• /
• v.24 no.1
• /
• pp.69-76
• /
• 2014

Urbanization affects the local thermal environment due to the large scale land use changes. To investigate the weather environment change of large scale urban redevelopment, 9 surface temperature and humidity observations were accomplished at Eunpyeong new town area. The observation period is from March 2007 to February 2010. In the center of development area, the air temperature has increased and relative humidity has decreased, by the changes of the land cover and building construction. In the area where the green zone is maintained, air temperature and relative humidity were not changed significantly. The air temperature and relative humidity for the other development observation stations is decreased and increased, respectively. The relative temperature difference between study area and a neighboring rural location was increased during observation periods. The difference is the highest during winter. The urban-rural minimum temperature difference was increased at development area, which means that urbanization affects increasing of minimum temperature in study area.

• Korean Journal of Child Studies
• /
• v.31 no.4
• /
• pp.49-60
• /
• 2010

This study sought to investigate and assess the development patterns of children, aged from 3 to 5, by means of a longitudinal approach. The children's developmental patterns are classified according to five curriculum areas; physical health, social skills, expression, language, and exploration-. The developmental patterns are analyzed in detail according to the observation period, children's ages, and their genders. The subjects consisted of 108 children in A city. A research assistant was asked to observe and keep records of the children's behaviors at three distinct times -early, middle, and late in the school year. The 'observational scale for children' was used as the measurement tool. The data which was thus collected was then subject to statistical analysis. The major findings of the study are as follows. First, there were significant differences in all five curriculum areas according to the children's age and observation period. That is, five-year-old children showed higher scores than three- and four-year-old children. Second, there were significant differences in the social development within five curriculum areas according to the children's gender and the observation period. That is, girls exhibited higher scores than boys.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.569-577
• /
• 2009

As the scale factor of model propellers utilized in cavitation test is about 40, it is difficult to find out practical countermeasures against the small area erosions on the blade tip region throughout model erosion tests. In this study, a partial propeller blade model was used for the observation of cavitation pattern for the eroded propeller. A partial propeller blade model was manufactured from 0.7R to tip with expanded profile and with adjustable device of angle of attack. Reynold's number of a partial propeller blade model is 7 times larger than that of a model propeller. Also, anti-singing edge and application of countermeasures to partial propeller blade model which produced in large scale can be more practical than a model propeller. For the observation of cavitation at high Reynold's number, high speed cavitation tunnel was used. To find out the most severe erosive blade position during a revolution, cavitation observation tests were carried out at 5 blade angle positions.