• Physical Therapy Korea
• /
• v.25 no.1
• /
• pp.22-30
• /
• 2018

Background: Improvement of lumbo-pelvic stability can reduce the compensatory action of the quadratus lumborum (QL) and selectively strengthen the gluteus medius (GM) during side-lying hip abduction (SHA). There are abdominal draw-in maneuver (ADIM) and abdominal bracing (AB) as active ways, and pelvic compression belt (PCB) as a passive way to increase of lumbo-pelvic stability. It is necessary to compare how these stabilization methods affect the selective strengthening of the GM. Objects: To investigate the effects of ADIM, AB, and PCB during SHA on the electromyography (EMG) activity of the GM, QL, external oblique (EO) and internal oblique (IO), and the GM/QL EMG activity ratio. Methods: A total of 20 healthy male adults participated in the study. The subjects performed three conditions in side-lying in random order: SHA with ADIM (SHA-ADIM), SHA with AB (SHA-AB), and SHA with PCB (SHA-PCB). To compare the differences among the three conditions, the EMG activities of the GM, QL, EO and IO, and GM/QL EMG activity ratio were analyzed using one-way repeated ANOVA. Results: The EMG activity of the QL was significantly higher in SHA-AB than in SHA-ADIM and SHA-PCB. The GM/QL activity ratio was significantly higher in SHA-PCB than in SHA-ADIM and SHA-AB. In addition, the figure for SHA-ADIM was significantly higher than that for SHA-AB. In the case of the EO, the figure for SHA-AB was significantly higher than corresponding values for the other two conditions. The figure for SHA-ADIM was significantly higher than that for SHA-PCB. The EMG activity of the IO was significantly higher in SHA-AH than in SHA-PCB. Conclusion: It can be suggested that wearing the PCB can more selectively strengthen the GM than to perform ADIM and AB during SHA. In addition, the ADIM can be recommended when there is a need to strengthen abdominal muscles during SHA.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.1
• /
• pp.11-20
• /
• 2016

Objective: This study aimed to compare biomechanical data between elite and beginner cyclists during cycle pedaling by performing a comparative analysis and to provide quantitative data for both pedaling performance enhancement and injury prevention. Methods: The subjects of this study included 5 elite cyclists (age: $18{\pm}0years$, body mass: $64.8{\pm}9.52kg$, height: $173.0{\pm}4.80cm$) and 5 amateur cyclists (age: $20{\pm}0years$, mass: $66.6{\pm}2.36kg$, height: $175.6{\pm}1.95cm$). The subjects pedaled on a stationary bicycle mounted on rollers of the same gear (front: 50 T and rear: 17 T = 2.94) and cadence of 90. The saddle height was adjusted to fit the body of each subject, and all the subjects wore shoes with cleats. In order to obtain kinematic data, 4 cameras (GR-HD1KR, JVC, Japan) were installed and set at 60 frames/sec. An electromyography (EMG) system (Telemyo 2400T, Noraxon, USA) was used to measure muscle activation. Eight sets of data from both the left and right lower extremities were obtained from 4 muscles (vastus medialis oblique [VMO], vastus lateralis oblique [VLO], and semitendinosus [Semitend], and lateral gastrocnemius [Gastro]) bilaterally by using a sampling frequency of 1,500 Hz. Five sets of events ($0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, and $360^{\circ}$) and 4 phases (P1, P2, P3, and P4) were set up for the data analysis. Imaging data were analyzed for kinematic factors by using the Kwon3D XP computer software (Visol, Korea). MyoResearch XP Master Edition (Noraxon) was used for filtering and processing EMG signals. Results: The angular velocity at $360^{\circ}$ from the feet was higher in the amateur cyclists, but accelerations at $90^{\circ}$ and $180^{\circ}$ were higher in the elite cyclists. The amateur cyclists had greater joint angles at $270^{\circ}$ from the ankle and wider knee joint distance at $0^{\circ}$, $180^{\circ}$, and $360^{\circ}$ than the elite cyclists. The EMG measurements showed significant differences between P2 and P4 from both the right VLO and Semitend. Conclusion: This study showed that lower body movements appeared to be different according to the level of cycle pedaling experience. This finding may be used to improve pedaling performance and prevent injuries among cyclists.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.2
• /
• pp.114-120
• /
• 2007

The augmentation of soft tissue defects is one of the critical problems in the oral and maxillofacial surgery. Various types of graft materials, both autologous and non-autologous, have been used for the augmentation of soft tissue in the facial region. However, it is not easy to choose an ideal material for soft tissue augmentation because each has its advantages and disadvantages. An ideal graft material should meet the following criteria : it should not leave a scar at the area from which it was taken; should have less likelihood of causing infection; should feel natural after implanted; and should be not absorbed. Among the materials meeting these criteria, human dermis and artificial dermis are commonly used for clinical purposes. The present study was aimed to investigate and compare the resorption rate and the histological change following the use of the autologous dermis, the human homogenous dermis $Alloderm^{(R)}$, and the artificial dermis $Terudermis^{(R)}$ to reconstruct the soft tissue defect. Twenty mature rabbits of either sex, weighing about 2 ㎏, were used. Each rabbit was transplanted with the autologous dermis, $Alloderm^{(R)}$, and $Terudermis^{(R)}$ size $1{\times}1-cm$ at the space between the external abdominal oblique muscle and the external abdominal oblique fascia. They were then divided into 4 groups (n=5 each) according to the time elapsed after the surgery: 1, 2, 4, and 8 weeks. The resorption rate was calculated by measuring the volume change before and after the transplantation, and H-E stain was preformed to observe the histological changes. The resorption rate after 8 weeks was 21.5% for the autologous dermis, 16.0% $Alloderm^{(R)}$, and 36.4% $Terudermis^{(R)}$, suggesting that $Alloderm^{(R)}$ is the most stable while $Terudermis^{(R)}$ is the most unstable. In microscopic examinations, the autologous dermis graft was surrounded by inflammatory cells and showed foreign body reactions. The epidermal inclusion cyst was observed in the autologous dermis graft. $Terudermis^{(R)}$ and $Alloderm^{(R)}$ demonstrated neovascularization and the progressive growth of new fibroblast. The results suggest that $Terudermis^{(R)}$ and $Alloderm^{(R)}$ can be availably for substituting the autologous dermis.

• Journal of Veterinary Clinics
• /
• v.35 no.3
• /
• pp.71-76
• /
• 2018

In 22 dogs with medial patellar luxation (MPL) of grade 3 or lower, resection of the vastus medialis oblique muscle, patellar anti-rotational suture, fascia lata overlap, and tibial tuberosity transposition (TTT) were undertaken to stabilize the patella without trochleoplasty. Data including signalment, clinical symptoms, details of the affected hindlimb, preoperative and postoperative patellar luxation grades, postoperative recovery time, and postoperative complications were obtained from medical records. The grade of lameness was evaluated preoperatively and postoperatively. Mean (${\pm}SEM$) grade of medial patellar luxation was $2.64{\pm}0.11$ preoperatively and $0.2{\pm}0.27$ postoperatively. Mean (${\pm}SEM$) grade of lameness was $1.73{\pm}0.27$ preoperatively and $0.18{\pm}0.15$ postoperatively. Patellar reluxation occurred in 1 of 22 (4.5%) cases requiring additional surgery. At final follow-up, 2 of the 22 (9.0%) dogs, including one with reluxation, had occasional lameness. Client-based questionnaire results demonstrated significant improvements in all parameters. Surgical treatment of MPL that included resection of the vastus medialis oblique without femoral trochlear groove deepening improved surgical outcomes in dogs with up to grade 3 MPL.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.219-225
• /
• 2020

With the aging population, the prevalence of musculoskeletal disorders in the elderly continues to increase. In addition, musculoskeletal disorders are the third most common social and economic loss among occupational illnesses in Workers' compensation insurance benefits as of 2015 standard and are also common among workers. In this study, a vest that can assist in the prevention and treatment of musculoskeletal disorders of the waist was produced, and it is intended to confirm the presence or absence of the effect through experiments. Diseases of the waist are closely related to core muscles. Therefore, the produced vest was made in a form that supports the core muscles. Before and after wearing the vest for effectiveness verification, the While performing 10-times of the Mackenzie exercises, a waist extension exercise, collected the EMG data of the internal oblique, Rectus abdominis, and Erector spinae, which correspond to the core muscles. The collected data were analyzed through the electromyography analysis program RM-3 to obtain RMS values for 10-times measurements of each muscle and to compare the average values. After comparing the data, to verify the significance, the technical statistical value of the measurement result was calculated and the average difference was verified through PASW ver18.0, And the paired t-test is performed on the experimental results to perform statistical processing. and Statistical processing was performed by setting the significance level to α=.05.

• Physical Therapy Korea
• /
• v.18 no.2
• /
• pp.60-66
• /
• 2011

Foot posture is important in the development of the musculoskeletal structure in the lower limbs because it can change the mechanical alignment. Although foot orthotics are widely used for the correction of malalignments in the lower extremities, the biomechanical effects of wedges have not yet been cleared. The aim of this study was to investigate whether medial wedges affect the electromyographic (EMG) activity of the knee and hip joints in healthy adults that are performing one leg standing. Seventeen healthy volunteers performed the one leg standing under two foot conditions: A level surface, and a $15^{\circ}$ medial wedge. The subjects' EMG data for the gluteus maximus (Gmax), gluteus medius (Gmed), tensor fasciae latae (TFL), biceps femoris (BF), vastus lateralis (VL), and vastus medialis oblique (VMO) were recorded, along with the surface EMG, and all were analyzed. The EMG activity of the Gmed and TFL had significantly decreased under the medial wedge condition during one leg standing. Further study is needed in order to investigate whether medial wedges influence the EMG activity and kinematic data of the knee and hip joints as well as the ankle joints in adults with flexible flatfoot, while they are performing one leg standing.

• The Journal of Korean Physical Therapy
• /
• v.22 no.5
• /
• pp.57-61
• /
• 2010

Purpose: The purpose of this study was to identify the effect of active foot arch support on the muscles of lower extremity electromyographic activity during squat exercise in persons with pronated foot. Methods: The study subjects were 16 persons with pronated foot. They have no history of surgery in lower extremity and trunk and limitation of range of motion or pain when performing squat exercise. Each subject was measured the navicular drop (ND) to determine the pronated foot. And then the subjects were asked to perform three repetitions of a $90^{\circ}$ knee flexion squat in both conditions which are 1) preferred squat and 2) squat with active foot arch support. Results: Paired t-test revealed that squat with active foot arch support produced significantly greater EMG activities in abductor hallucis (p=0.00), proneus longus (p=0.03) and gluteus medius (p=0.04) than preferred squat. But the EMG activities of tibialis anterior, vastus medialis oblique and vastus lateralis were not showed significantly different between the both squat conditions. Conclusion: The findings of this study suggest that active foot arch support during squat increase the activities of lower extremity muscles which are the abductor hallucis, proneus longus and gluteus medius. Also, the abductor hallucis which is one of the planter intrinsic muscle and peroneus longus play a role in support of the foot arch and active foot arch support induced the increase of the activity of gluteus medius. Therefore active foot arch support can change the lower extremity biomechanics as well as passive foot support such as foot orthotics and taping.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.1
• /
• pp.77-84
• /
• 2020

PURPOSE: This study compared the activities of the trunk muscles during crutch walking to determine which of the crutch length measurements is most beneficial. METHODS: Twenty young women volunteered to participate in this study. After adjusting crutch length, the participants performed a three-point walking with nondominant leg limited in weight bearing. This study used six crutch length measurements: (1) Height-40.6cm, (2) Height'.77, (3) Olecranon-to-finger length, (4) Axillary-toheel length, (5) Arm-span length-40.6cm, and (6) Arm-span length'.77. The EMG activities of the internal oblique (IO), rectus abdominis (RA), multifidus (MF), and erector spinae (ES), muscles on the weight bearing side were monitored using wireless surface EMG. RESULTS: The EMG activities of the RA and ES appeared to be significantly different among the crutch length measurements (p<.05). The post-hoc test showed that the 'Arm-span length-40.6cm' was significantly greater in the RA activity when compared to the 'Height'.77' and 'Axillary-to-heel length' measurements, and in the ES activity when compared to 'Height'.77' measurements. Furthermore, IO/RA and MF/ES ratios showed significant differences among the crutch length measurements (p<.05). In the post-hoc test, significant difference was observed between 'Olecranon-to-finger length' and 'Arm-span length-40.6cm' for the IO/RA ratio, and between 'Height'.77' and 'Olecranon-to-finger length' and between 'Height'.77' and 'Arm-span length-40.6cm' measurement for the MF/ES ratio. CONCLUSION: These findings suggest that the 'Height'.77' measurement is relatively advantageous to optimize the activities of trunk muscles during the crutch walking, and allow simple measurements of the crutch length.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.922-925
• /
• 2015

This study was conducted to estimate the genetic parameters for pork belly traits and muscles in Yorkshire pigs. Each pork belly was cut into nine parts perpendicular to the thoracic vertebrae (6th to 14th). Traits of belly muscles including the deep pectoral, latissimus dorsi, cutaneous trunci, rectus abdominis, external and internal abdominal oblique from 382 purebred pigs were recorded and analyzed using SAS Package (9.1) and Derivative-free restricted maximum likelihood methods. Heritability estimates for belly traits ranged from 0.27 to 0.49, while they were 0.12 to 0.66 for belly muscles. Moderate to high heritability estimates were noted in belly weight (0.33), belly length (0.28), and belly width (0.49). In belly muscles, the latissimus dorsi and deep pectoral, which are located only in the 6th to 9th vertebrae sections, were found to have heritability estimates ranging from 0.21 to 0.29 and 0.23 to 0.35, respectively. Strong heritability estimates were observed in the 7th to 13th sections of cutaneous trunci muscle ranging from 0.42 to 0.66. Genetic correlations of latissimus dorsi m. with belly length were positive (0.50), while cutaneous trunci m. with belly weight also revealed a positive relationship that ranged from 0.35 to 0.47. The estimated genetic parameters indicate that belly weight can be improved by genetic selection. Differences in the levels of heritability occurred among various parameters of Yorkshire pork belly, which should be considered when performing selection to improve pork belly quality. Moreover, these results can provide valuable information that can be used as the basis for further investigations to improve pork belly.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.2
• /
• pp.138-146
• /
• 2018

PURPOSE. The purpose of this study was to analyze the effects of the splinted implant prosthesis in a reconstructed mandible using three-dimensional finite element analysis. MATERIALS AND METHODS. Three-dimensional finite element models were generated from a patient's computed tomography data. The patient had undergone partial resection of the mandible that covered the area from the left canine to the right condyle. The mandible was reconstructed using a fibula bone graft and dental implants. The left mandibular premolars and molars remained intact. Three types of models were created. The implant-supported prosthesis was splinted and segmented into two or three pieces. Each of these models was further subcategorized into two situations to compare the stress distribution around normal teeth and implants. Oblique loading of 300 N was applied on both sides of the mandible unilaterally. The maximum von Mises stress and displacement of the models were analyzed. RESULTS. The stress distribution of the natural mandible was more uniform than that of the reconstructed fibula. When the loading was applied to the implant prosthesis of reconstructed fibula, stress was concentrated at the cortical bone around the neck of the implants. The three-piece prosthesis model showed less uniform stress distribution compared to the others. Displacement of the components was positively correlated with the distance from areas of muscle attachment. The three-piece prosthesis model showed the greatest displacement. CONCLUSION. The splinted implant prosthesis showed a more favorable stress distribution and less displacement than the separated models in the reconstructed mandible.