• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.307-319
• /
• 2016

A Land-Atmosphere Modeling Package (LAMP) for supporting agricultural and forest management was developed at the National Center for AgroMeteorology (NCAM). The package is comprised of two components; one is the Weather Research and Forecasting modeling system (WRF) coupled with Noah-Multiparameterization options (Noah-MP) Land Surface Model (LSM) and the other is an offline one-dimensional LSM. The objective of this paper is to briefly describe the two components of the NCAM-LAMP and to evaluate their initial performance. The coupled WRF/Noah-MP system is configured with a parent domain over East Asia and three nested domains with a finest horizontal grid size of 810 m. The innermost domain covers two Gwangneung deciduous and coniferous KoFlux sites (GDK and GCK). The model is integrated for about 8 days with the initial and boundary conditions taken from the National Centers for Environmental Prediction (NCEP) Final Analysis (FNL) data. The verification variables are 2-m air temperature, 10-m wind, 2-m humidity, and surface precipitation for the WRF/Noah-MP coupled system. Skill scores are calculated for each domain and two dynamic vegetation options using the difference between the observed data from the Korea Meteorological Administration (KMA) and the simulated data from the WRF/Noah-MP coupled system. The accuracy of precipitation simulation is examined using a contingency table that is made up of the Probability of Detection (POD) and the Equitable Threat Score (ETS). The standalone LSM simulation is conducted for one year with the original settings and is compared with the KoFlux site observation for net radiation, sensible heat flux, latent heat flux, and soil moisture variables. According to results, the innermost domain (810 m resolution) among all domains showed the minimum root mean square error for 2-m air temperature, 10-m wind, and 2-m humidity. Turning on the dynamic vegetation had a tendency of reducing 10-m wind simulation errors in all domains. The first nested domain (7,290 m resolution) showed the highest precipitation score, but showed little advantage compared with using the dynamic vegetation. On the other hand, the offline one-dimensional Noah-MP LSM simulation captured the site observed pattern and magnitude of radiative fluxes and soil moisture, and it left room for further improvement through supplementing the model input of leaf area index and finding a proper combination of model physics.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.3
• /
• pp.124-131
• /
• 2006

For commercialization of molten carbonate fuel cell (MCFC), it has some problems to be overcome such as decrease of porosity and thickness of the anode under the operating condition (at $650^{\circ}C$ and working pressure of more than 2 $kg_f/cm^2$). Recently, Ni-Al alloy anode has been proposed to replace the conventional Ni-Cr anode as an alternative material to resist a creep and inhibit the sintering. The objective of this research is to sinter the green sheet of Ni-Al alloy anode during single cell pre-treatment process, which has several advantages like cost down and simplification of manufacturing process. However, the Ni-Al alloy anode prepared with a conventional pre-treatment process showed the phase separation of Ni-Al alloy and formation of micropore(${\leqq}0.4{\mu}m$), resulting in low creep resistance and high electrolyte re-distribution. In order to prevent the Ni-Al alloy anode from phase-separating, nitrogen gas was used in the process of pre-treatment. Introducing the nitrogen, the phase separation from Ni-Al alloy into nickel and alumina was minimized and increased creep resistance. However, there was some micropore formation on the surface of Ni-Al alloy anode during the cell operation due to creation of lithium aluminate. Addition of more amount of electrolyte into a cell, especially at cathode, made the cell performance stable for 2,000 hrs. Consequently, it was possible to make the Ni-Al alloy anode with good creep resistance by the modified in-situ sintering technique.

• Journal of Genetic Medicine
• /
• v.7 no.1
• /
• pp.59-66
• /
• 2010

Purpose: Quantitative fluorescent polymerase chain reaction (QF-PCR) allows for the rapid prenatal diagnosis of common aneuploidies. The main advantages of this assay are its low cost, speed, and automation, allowing for large-scale application. However, despite these advantages, it is not a routine method for prenatal aneuploidy screening in Korea. Our objective in the present study was to validate the performance of QF-PCR using short tandem repeat (STR) markers in a Korean population as a means for rapid prenatal diagnosis. Material and Methods: A QF-PCR assay using an Elucigene kit (Gen-Probe, Abingdon, UK), containing 20 STR markers located on chromosomes 13, 18, 21, X and Y, was performed on 847 amniotic fluid (AF) samples for prenatal aneuploidy screening referred for prenatal aneuploidy screening from 2007 to 2009. The results were then compared to those obtained using conventional cytogenetic analysis. To evaluate the informativity of STR markers, the heterozygosity index of each marker was determined in all the samples. Results: Three autosomes (13, 18, and 21) and X and Y chromosome aneuploidies were detected in 19 cases (2.2%, 19/847) after QF-PCR analysis of the 847 AF samples. Their results are identical to those of conventional cytogenetic analysis, with 100% positive predictive value. However, after cytogenetic analysis, 7 cases (0.8%, 7/847) were found to have 5 balanced and 2 unbalanced chromosomal abnormalities that were not detected by QF-PCR. The STR markers had a slightly low heterozygosity index (average: 0.76) compared to those reported in Caucasians (average: 0.80). Submicroscopic duplication of D13S634 marker, which might be a unique finding in Koreans, was detected in 1.4% (12/847) of the samples in the present study. Conclusion: A QF-PCR assay for prenatal aneuploidy screening was validated in our institution and proved to be efficient and reliable. However, we suggest that each laboratory must perform an independent validation test for each STR marker in order to develop interpretation guidelines of the results and must integrate QF-PCR into the routine cytogenetic laboratory workflow.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.6
• /
• pp.453-458
• /
• 2001

The Rural Development Administration (RDA) of Korea now operates a system called Rice Variety Selection Tests (RVST), which are now being implemented in eight Agricultural Research and Extension Services located in eight province RVST's objective is to provide accurate yield estimates and to select well-adapted varieties to each province. Systematic evaluation of entries included in RVST is a highly important task to select the best-adapted varieties to specific location and to observe the performance of entries across a wide range of test sites within a region. The rice yield data in RVST for ordinary transplanting in Kangwon province during 1997-2000 were analyzed. The experiments were carried out in three replications of a random complete block design with eleven entries across five locations. Additive Main effects and Multiplicative Interaction (AMMI) model was employed to examine the interaction between genotype and environment (G$\times$E) in the biplot form. It was found that genotype variability was as high as 66％, followed by G$\times$E interaction variability, 21％, and variability by environment, 13％. G$\times$E interaction was partitioned into two significant (P＜0.05) principal components. Pattern analysis was used for interpretation on G$\times$E interaction and adaptibility. Major determinants among the meteorological factors on G$\times$E matrix were canopy minimum temperature, minimum relative humidity, sunshine hours, precipitation and mean cloud amount. Odaebyeo, Obongbyeo and Jinbubyeo were relatively stable varieties in all the regions. Furthermore, the most adapted varieties in each region, in terms of productivity, were evaluated.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.417-428
• /
• 2011

Depending on the plastic deformation capacity required, structural steel design under the current codes can be classified into three categories: elastic, plastic, and seismic design. Most of the current steel codes explicitly forbid the use of a steel material with a yield strength higher than 450 MPa in the plastic design because of the concerns about its low plastic deformation capacity as well as the lack of test data on local and lateral torsional buckling behavior. In this study, flexural tests on full-scale H-shape members built with SM490A (ordinary steel or benchmark material) and HSB800 (high-strength steel) were carried out. The primary objective was to investigate the appropriateness of extrapolating the local buckling criterion of the current codes, which was originally developed for normal-strength steel, to the case of high-strength steel. All the SM490A specimens performed consistently with the current code criteria and exhibited sufficient strength and ductility. The performance of the HSB800 specimens was also very satisfactory from the strength perspective; even the specimens with a noncompact and slender flange developed the plastic moment capacity. The HSB800 specimens, however, showed an inferior plastic rotation capacity due to the premature tensile fracture of the beam bottom flange beneath the vertical stiffener at the loading point. The plastic rotation capacity that was achieved was less than 3 (or the minimum level required for a plastic design). Although the test results in this study indicate that the extrapolation of the current flange local-buckling criterion to the case of high-strength steel is conservative from the elastic design perspective, further testing together with an associated analytical study is required to identify the causes of the tensile fracture and to establish a flange slenderness criterion that is more appropriate for high-strength steel.

• Journal of Legislation Research
• /
• no.44
• /
• pp.487-538
• /
• 2013

It is the most critical issue in recent international intellectual property licence disputes to decide the applicable laws to the license contracts. As Korea and the European Union(EU) reached free trade agreement(FTA), and the EU-Korea FTA entered into force on July 1, 2011, the FTA has boosted social, economic, cultural exchanges between the two. As a result of the increased transactions in those sectors, legal disputes are also expected to grow. This situation calls for extensive research and understanding of the choice of law principles applicable to international intellectual property license contracts in the EU. To decide the laws applicable to issues arising from international intellectual property license contracts disputes, the characterization of those issues is necessary for the purpose of applying private international law principles to them. In terms of characterization, intellectual property license contracts fall within contractual matters. In the EU, the primary rule of choice of law principles in contractual obligations is the Rome I Regulation. Because the choice of law rules, such as private international law principles, the Rome Convention(1980), and the Rome I Regulation, differ in the time of application, it is essential to clarify the time factor of related contracts. For example, the Rome I Regulation applies to contracts which were concluded as from December 17, 2009. Although party autonomy in international contracts disputes is generally allowed, if there is no choice of law agreement between the parties to the contracts, the objective test rule of private international law doctrine could be the best option. Following this doctrine, the Rome I Regulation Article 4, Paragraph 1 provides the governing law rules based on the types of contracts, but there is no room for intellectual property license contracts. After all, as the rule for governing law of those contracts, the Rome I Regulation Article 4, Paragraph 2 should be applied and if there are countries which are more closely connected to the contracts under the Rome I Regulation Article 4, Paragraph 3, the laws of those countries become the governing laws of the contracts. Nevertheless, if it is not possible to decide the applicable laws to the license contracts, the Rome I Regulation Article 4, Paragraph 4 should be applied in the last resort and the laws of the countries which are the most closely connected to the contracts govern the license contracts. Therefore, this research on the laws applicable to intellectual property license contracts under the Rome I Regulation suggests more systematic and effective solutions for future disputes in which Korea and the EU countries play the significant role as the connecting factors in the conflict of laws rules. Moreover, it helps to establish comprehensive and theoretical understanding of applying the Korean Private International Law to multifarious choice-of-law cases.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.5
• /
• pp.61-78
• /
• 2019

This study is about the effect of the founder's self-efficacy on the sales of the founding company by focusing on the factors that are currently emphasized in the founding education. In particular, this paper starts from the consciousness of the problem that the education that is being implemented to achieve the purpose of successful start-up among various government-based start-up support projects is failing to produce many start-up failures. Entrepreneurs cannot be assessed by objective financial data, but there is a high degree of uncertainty that should be determined based on their personal and learning abilities. In addition, many previous studies, which are likely to be successful when there is a high self-efficacy in a specific field due to the influence of factors such as personal experience or learning, will answer the direction of support for start-up companies. This study focuses on the impact of the founder's self-efficacy on the sales of the founding firms, especially the sales that are the key to the survival of the founding firms. This study has six major studies. First, to analyze whether the self-efficacy of entrepreneurs with respect to entrepreneurship affects the sales of entrepreneurs. Second, to analyze whether the self-efficacy of entrepreneurs with respect to market orientation affects the sales of entrepreneurs. Analysis of whether the founder's self-efficacy affects the sales of the founding firms. Fourth, analysis of whether the founder's self-efficiency affects the sales of the founding firms' understanding of management environment changes. An analysis of whether efficacy affects the sales of a start-up company, and sixth, an analysis of whether the founder's self-efficacy of business model building ability affects the sales of a start-up company. As a result of the empirical analysis, this study found that the self-efficacy of entrepreneurs on product differentiation capability and business model building capacity had a positive influence on the sales of entrepreneurs. The self-efficacy had a positive effect on self-efficacy, and the customer orientation had a positive effect on self-efficacy on business model building capacity. Also, it was confirmed that a path exists between the components of self-efficacy and that self-efficacy through the path has a positive effect on the sales of the start-up company. Therefore, the results of this study suggest the implications of establishing such a path and strengthening self-efficacy to create the survival and start-up performance of a start-up company if the goal of the start-up company is to survive when implementing various support projects for the start-up company.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.983-994
• /
• 2021

Objective : The effectiveness of gamma knife radiosurgery (GKR) in the treatment of brain metastases is well established. The aim of this study was to evaluate the efficacy and safety of maximizing the radiation dose in GKR and the factors influencing tumor control in cases of small and medium-sized brain metastases from non-small cell lung cancer (NSCLC). Methods : We analyzed 230 metastatic brain tumors less than 5 mL in volume in 146 patients with NSCLC who underwent GKR. The patients had no previous radiation therapy for brain metastases. The pathologies of the tumors were adenocarcinoma (n=207), squamous cell carcinoma (n=18), and others (n=5). The radiation doses were classified as 18, 20, 22, and 24 Gy, and based on the tumor volume, the tumors were categorized as follows : small-sized (less than 1 mL) and medium-sized (1-3 and 3-5 mL). The progression-free survival (PFS) of the individual 230 tumors and 146 brain metastases was evaluated after GKR depending on the pathology, Eastern Cooperative Oncology Group (ECOG) performance score (PS), tumor volume, radiation dose, and anti-cancer regimens. The radiotoxicity after GKR was also evaluated. Results : After GKR, the restricted mean PFS of individual 230 tumors at 24 months was 15.6 months (14.0-17.1). In small-sized tumors, as the dose of radiation increased, the tumor control rates tended to increase (p=0.072). In medium-sized tumors, there was no statistically difference in PFS with an increase of radiation dose (p=0.783). On univariate analyses, a statistically significant increase in PFS was associated with adenocarcinomas (p=0.001), tumors with ECOG PS 0 (p=0.005), small-sized tumors (p=0.003), radiation dose of 24 Gy (p=0.014), synchronous lesions (p=0.002), and targeted therapy (p=0.004). On multivariate analyses, an improved PFS was seen with targeted therapy (hazard ratio, 0.356; 95% confidence interval, 0.150-0.842; p=0.019). After GKR, the restricted mean PFS of brain at 24 months was 9.8 months (8.5-11.1) in 146 patients, and the pattern of recurrence was mostly distant within the brain (66.4%). The small and medium-sized tumors treated with GKR showed radiotoxicitiy in five out of 230 tumors (2.2%), which were controlled with medical treatment. Conclusion : The small-sized tumors were effectively controlled without symptomatic radiation necrosis as the radiation dose was increased up to 24 Gy. The medium-sized tumors showed potential for symptomatic radiation necrosis without signifcant tumor control rate, when greater than 18 Gy. GKR combined targeted therapy improved the tumor control of GKR-treated tumors.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1281-1293
• /
• 2021

The recent launch of the GOCI-II enables South Korea to have the world's first capability in deriving the ocean color data at geostationary satellite orbit for about 20 years. It is necessary to develop a consistent long-term ocean color time-series spanning GOCI to GOCI-II mission and improve the accuracy through validation using in situ data. To assess the GOCI-II's early mission performance, the objective of this study is to compare the GOCI-II Chlorophyll-a concentration (Chl-a), Colored Dissolved Organic Matter (CDOM), and remote sensing reflectances (R_rs) through comparison with the GOCI data. Overall, the distribution of GOCI-II Chl-a corresponds with that of the GOCI over the Yellow Sea, Korea Strait, and the Ulleung Basin. In particular, a smaller RMSE value (0.07) between GOCI and GOCI-II over the summer Ulleung Basin confirms the GOCI-II data's reliability. However, despite the excellent correlation, the GOCI-II tends to overestimate Chl-a than the GOCI over the Yellow Sea and Korea Strait. The similar over-estimation bias of the GOCI-II is also notable in CDOM. Whereas no significant bias or error is found for R_rs at 490 nm and 550 nm (RMSE~0), the underestimation of R_rs at 443 nm contributes to the overestimation of GOCI-II Chl-a and CDOM over the Yellow Sea and the Korea Strait. Also, we show over-estimation of GOCI-II R_rs at 660 nm relative to GOCI to cause a possible bias in Total suspended sediment. In conclusion, this study confirms the initial reliability of the GOCI-II ocean color products, and upcoming update of GOCI-II radiometric calibration will lessen the inconsistency between GOCI and GOCI-II ocean color products.

• Journal of vocational education research
• /
• v.30 no.4
• /
• pp.23-49
• /
• 2011

Faculty performance evaluation system has been settled down as an uncomfortable but unavoidable system, and it is one of the most important factors to grow the college competitiveness up. In this study, we selected and surveyed faculty evaluation models of several universities and colleges in Korea, and analyzed by comparing each evaluation areas of educational achievement, college-industry collaboration, research, and service. We also identified the properties of the current faculty evaluation models of the junior colleges, and derived several problems from these models such as an imitation of four-year university model, a disorders of job evaluation with respect to the attributes of classified jobs, a large variation of individual item weights, and an insufficient reflection of major characteristics. Based on these surveys and analysis, an improved faculty evaluation model for the junior college is proposed in this study. This model proposed four basic areas-educational achievement, college-industry collaboration, research, and service by considering the importance of the college-industry collaboration in the junior college-as well as the team evaluation area. Weights of the SCI-class paper was selected as a criterion for the arrangement of objective comparison of each evaluation items. We showed the integration method of several different evaluation model with respect to the attributes of classified jobs of each faculties, and evaluation plan of variational characteristics according to the majors of individuals in this model. Finally, we introduced an area fail and rating system to operate efficiently the proposed faculty evaluation model.