• 소성∙가공
• /
• 제30권3호
• /
• pp.125-133
• /
• 2021

In this study, response surface method (RSM), back propagation neural network (BPNN), and genetic algorithm (GA) were used for modeling and multi-objective optimization of the parameters of AA5052-H32 in incremental sheet forming (ISF). The goal of optimization is to determine the maximum forming angle and minimum surface roughness, while varying the production process parameters, such as tool diameter, tool spindle speed, step depth, and tool feed rate. A Box-Behnken experimental design (BBD) was used to develop an RSM model and BPNN model to model the variations in the forming angle and surface roughness based on variations in process parameters. Subsequently, the RSM model was used as the fitness function for multi-objective optimization of the ISF process the GA. The results showed that RSM and BPNN can be effectively used to control the forming angle and surface roughness. The optimized Pareto front produced by the GA can be utilized as a rational design guide for practical applications of AA5052 in the ISF process

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1611-1616
• /
• 2004

The objective of this study is to simulate the etching characteristics under different process parameters for the optimization of etching process. The etching characteristics such as the etching factor were investigated under different operating conditions and compared with the spray characteristics. The spray characteristics were measured by using Phase Doppler Anemometer. The correlation between the etching characteristics and the spray characteristics was analyzed to simulate the etching characteristics under the actual parameters of the etching process. The parameters were distance of nozzle tip and pipe pitch. To improve the uniformity and value of etching factor in the etching process, the process parameters should be designed optimally. The distribution of spray was simulated by the Monte-Carlo Method and the process parameters were optimized by the design of experiments(DOE).

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.64-71
• /
• 1997

Objective of calibration is to find out the accurate kinematic relationships between robot joint angles and the position of the end-effector by estimating accurate model parameters defining the kinematic function. Estimating the model parameters requires measurement of the end-effector position at a number of different robot configurations. This paper studies the implication of measurement configurations in robot calibration. For selecting appropriate measurement configurations in robot calibration, an index is defined to measure the observability of the model parameters with respect to a set of robot configurations. It is found that, as the observability index of the selected measurement configurations increase the attribution of the position errors to the parameter errors becomes dominant while the effects of the measurement and unmodeled errors are less significant; consequently better estimation of parameter errors is expected. To demonstrate the implication of the observability measure in robot calibration, computer simulations are performed and their results are discussed.

• 한국환경과학회지
• /
• 제12권10호
• /
• pp.1109-1116
• /
• 2003

The genetic algorithm is investigated fer parameters estimation of SED (storage - effective drainage) model from the Wi-stream watershed in Nakdong river basin. In the practical application of model, as a number of watershed parameters do not measure directly, it is desirable to make a good estimation from the known rainfall and runoff data. For the estimation of parameters of the SED model using the genetic algorithm, parameters of Green-Ampt equation(SM, K$\_$s/) for the estimation of an effective rainfall and initial storage(y$\_$in/) used in SED model are obtained a regression equation with 5, 10, 20 days antecedent precipitation. And as a consequence of computation, the parameters were obtained to satisfy the proposed objective function. From the comparison of observed and computed hydrographs, it shows a good agreement in the shape and the rising limb, peak, falling limb of hydrograph, so the SED model using the genetic algorithm shows a suitable model for runoff analysis in river basin.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.945-950
• /
• 2001

Floor impact noise has been evaluated by investigating the temporal and spectral characteristics of the noise. The noises generated by different impactors were analyzed to find out whether there is any correlation with the factors of ACF /IACF (Autocorrelation Function/Inter-aural Cross-correlation Function) [1] and Zwicker parameters [2]. Experiments were undertaken to compare the objective and subjective parameters of the floor impact noises generated by a bang/tapping machine, a rubber ball [3], and a walker. As a result, it was found that $\phi$ (0) and IACC extracted from ACF/IACF, and Loudness, Unbiased Annoyance from Zwicker parameters showed high correlation with subjective evaluations of loudness concerning floor impact noises. In addition, it was revealed that jumping is similar to the ball.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.745-746
• /
• 2012

• 대한간호학회지
• /
• 제26권4호
• /
• pp.868-877
• /
• 1996

This study was done to analyze research trends and to suggest future perspectives for nursing research on fatigue. The author reviewed 31 Korean and foreign research papers which have been published in the literature since 1970. An analysis of the study focused on the type of research subjects, type of study design. measurement instrument, and its correlated parameters. The results of the study are summarized as follows : First, within all of the studies analayzed, 14 studies were publised in Korea and 17 were published abroad. The number of studies done abroad have been increasing rapidly since 1991. Second, an analysis of the research design of the studies showed, eight studies each, Korean and foreign used survey design. Two Korean studies and seven foreign studies used a correlational design. Four comparative studies were done in Korea, but only two experimetal studies were performed abroad. Therefore, it was found that the trend of the study design used is survey design and there are more correlational studies done abroad than in Korea. Third, the type of the study subjects ; 11 Korean and three foreign studies dealt with healthy people. In addition, three Korean and 14 foreign studies investigated patients with various illnesses. It was found that patients with various illnesses were studied more frequently in foreign studies than in Korean studies. Fourth, the measurement tool used in the Korean studies ; 13 studies used a testible tool to assess patients' subjective symtoms or complaints of fatigue. The most commonly used tool used in 10 studies, was the Fatigue Self-Perception Scale, which was designed by the Labor and Health Institute of Japan. The Visual Analogue Scale was used in two studies, and Piper Fatigue Scale, addtional with physiologic parameters, was used in one study. In the foreign studies, subjective measurement tools were used in 16 studies. A combination of a subjective measurement tool with objective parameters was used in ten studies. For the subjective measurement tool used in the foreign studies, a specific measurement tool developed by the researcher which was used in seven studies. Either Rhoten Fatigue Scale or the Visual Analog Scale were used in three studies. Additionally, in order to identify the relationship between fatigue and psychological factors, The Profile of Mood State was used in three studies. Beck Depression Inventory was used in two studies. The Self Rated Depression Scale, developed by Zung, was used in one study and other measurement tools were used to measure various psychological parameters. Rhoten fatigue Checklist was also used to observe behavior patterns. Lastly, nine studies identified correlations between fatigue and other parameters. A significant correlation was found between fatigue and psychological factors such as depression, and pain. As a result of the above findings, it can be said that research trends on fatigue are increasing internationally. The selected study designs are survey studies both in Korea and abroad. There are more correlational studies abroad than in Korea. In addition, subjective measurement tools and objective parameters are used variously and combined with each other. had, there is a significant correlation between fatigue and psychological factors such as depression, and pain. More survey and correlational studies need to be done to identify the relationship of fatigue in patients with various condition or diagnoses and to suggest a scientific basis for nursing interventions with fatigue. Also, a tool to assess patient's subjective, objective, and behavioral aspects on fatigue needs to be developed.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1626-1634
• /
• 2015

LCL filters are widely used in three-phase PWM converter for its advantages of small volume, low cost and inhibition of high frequency current harmonic. However, it is difficult to optimize its design because its parameters are mutually influenced while the value of each parameter for LCL filter has impacts on the converter's cost and size. In this paper, the target of optimization is to minimize the parameter values of LCL filter, and an optimization method for parameters of LCL filter of three-phase PWM converter based on least square method is proposed. With this method, a quantitative calculation of the harmonic component of the converter’s side phase voltage is performed first, and then the quantitative relationship between phase voltage harmonics and grid phase current harmonics is analyzed. After that, the attenuation requirement of each harmonic is obtained by taking into account the requirements for each harmonic component of grid current. Then according to the optimization objective, the objective function with minimum harmonic attenuation deviation is established, and least squares method is adopted for three-dimensional global searching of parameters for LCL filter. Thus, the designed harmonic attenuation curve approximates the minimum attenuation requirements, and the optimized LCL filter parameters are obtained. Finally, the effectiveness of the method is verified by the experiments.

• 대한기계학회논문집A
• /
• 제37권1호
• /
• pp.67-75
• /
• 2013

핵연료 지지격자 소재로 사용되는 zircaloy-4의 유동응력을 Johnson-Cook 모델로 결정하고, 모델의 재료상수를 역 공학으로 도출했다. 변형률 항의 상수 A, B, n과 변형률 속도 항의 $\dot{\varepsilon}_0$은 인장시험을 통해 결정했다. 상수 C, m을 역 공학으로 도출하기 위해 슬롯밀링시험을 수행하고, 유한요소해석으로 모사했다. 실험과 해석으로 얻은 결과의 차이를 오차함수, 즉 최소화 대상 목적함수로 설정했고, 이 함수를 최소로 하는 C, m을 도출했다. 도출한 상수의 타당성을 검증하기 위해 상관계수를 살펴봤고, 전단시험과 해석을 수행해 교차 검증했다. 상관계수는 모든 조건에 대해 0.97이상으로 실험과 해석결과 사이에 강한 상관관계가 있음을 확인했다. 전단시험과 해석의 전단면 형상 및 최대하중을 비교하여 도출한 유동응력 모델이 타당함을 보였다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.680-695
• /
• 1998

The objective of this study is to optimize the responses of the creep feed ceramic grinding process simultaneously by an off-1ine multicriteria optimization methodology. The responses considered as objectives are material removal rate, flexural strength, normal grinding force, workpiece surface roughness and grinder power. Alumina material was ground by the creep feed grinding mode using superabrasive grinding wheels. The process variables optimized for the above objectives include grinding wheel specification, such as bond type, mesh size, and grit concentration, and grinding process parameters, such as depth of cut and feed rate. A weighting method transforms the multi-objective problem into a single-objective programming format and then, by parametric variation of weights, the set of non-dominated optimum solutions are obtained. Finally, the multi-objective optimization methodology was tested by a sensitivity analysis to check the stability of the model.