• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.200-213
• /
• 2016

This study is to compare the differences in food quality between traditional Korean restaurants and Western-style restaurants, and then to identify the shortcomings as traditional Korean food prefered than western food. The object of this study is not only to provide the basic data of the domestic food service industry to enable the traditional food ingredients but also increase the sales produced in the farm and fishing economy. Western-style and traditional Korean restaurant food quality were subjected to an IPA analysis to understand the importance and satisfaction with each of them. The IPA analysis of Western-style restaurants and traditional Korean restaurants showed that using regional specialties ingredients, healthy food, and the number of dishes in a set menu were commonly included in the first quadrant. Menu planners of Korean restaurants in should consider the need to develop traditional food using regional ingredients prepared by a reputable chef from the region, and develop delicious healthy food using local specialties without artificial flavors. In addition, considering the demographic characteristics, the ideal food should target visitors in their 40s who with 300~400,000 to spend with friends or colleagues.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.166-173
• /
• 2017

Morphological and population characteristics of the Cottus koreanus were investigated at Hoam stream from October 2015 and April 2016. This is the first record on C. koreanus not only from Hoam stream (the upstream region of Daejong stream, Gyeongsangbuk-do Gyeongju-si Yangbuk-myeon Hoam-ri) but also from the stream flowing into the Samcheogosip stream, in the southern part of East Sea, Korea. The distribution of C. koreanus ranged from Girim temple to Yongyeon waterfall, about 1.2 km, and the water surface were about $3,600m^2$. The population size was assumed to 1,656 individual number, 46 object per $100m^2$. The morphometric characteristics of C. koreanus in the Hoam stream and the Han river are very similar except that the population at Hoam stream shorter head length, ventral fin ray length, pectoral fin ray length and mouth width when compared with the population at Han river. Other than that, the two populations showed the same meristic characters. Frequency analysis of total length indicated that the group with 40~59 mm in total length was one year old, the 60~79 mm was two years old, and the group over 80 mm was three years old. The average number of eggs in the ovaries was estimated as 361 (239~468) per matured female. The number of matured eggs size in ovaries was $2.6{\pm}0.21$ (23.~3.1) mm and this species was large eggs type. Calculation of the length-weight relation of C. koreanus showed the value of constant a as 0.00001 and b as 3.01, and the Condition factor (K) was 1.26 an on average.

• The Journal of Fisheries Business Administration
• /
• v.40 no.2
• /
• pp.71-103
• /
• 2009

This study is designed to propose the ways of the multilateral cooperation system for effective management of fisheries resources in the various overlapping zones established by bilateral fisheries agreements between Korea, China and Japan in North East Asia as semi-enclosed sea. It is necessary to build multilateral fisheries cooperation between Korea, China and Japan in North East Asia because conservation & management of transboundary fish stocks could not be guaranted effectively by the management of fisheries resources in the area where piled up the current-fishing-pattern zone, as white zone and the various grey zone as middle zone, and the interim measures zone of bilateral fisheries agreements between Korea, China and Japan are piled up. Fisheries management in Korea, China and Japan by the bilateral fisheries agreements in North East Asia is faced with difficulties manage fisheries resources. International relationship on fisheries is maintained by bilateral fisheries agreements based on UNCLOS. However fisheries resources are over-exploited and the recovery of the fisheries resources is very slow because proper conservation and management of transboundary fish stocks which article 63(1) of UNCLOS defines have not prepared yet. Thus close cooperation among the coastal States for a proper conservation and management of transboundary fish stocks is necessary. Since the transboundary fish migrate within the EEZs of two or more coastal States, there is a need to manage the fish stocks in the region between Korea, China and Japan through a multi-lateral mechanism at ccircumference area of the current-fishing-pattern zone as white zone. Coastal States must guarantee sustainable maintenance of transboundary fish stocks through the regional cooperation for a proper conservation & management because one coastal State alone could not guarantee conservation and management of fish stocks. Thus there is a need to build multilateral fisheries cooperation between Korea, China and Japan in North East Asia. There are many successful instances including the Barents' sea for a proper conservation & management of transboundary fish stocks. The Barents' sea is one of the best research object to study the regional cooperation for a conservation & management of transboundary fish stocks in North East Asia. In conclusion, it is necessary to build a multilateral fisheries cooperation system between Korea, China and Japan in North East Asia to conserve and manage transboundary fish stocks effectively. It seems desirable that the range of the area to conserve and manage fish stocks should may be any partial area in the current-fishing-pattern zone and interim measures zone between Korea and China, Jeju middle zone between Korea and Japan, interim measures zone of bilateral fisheries agreements between China and Japan.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.49-55
• /
• 2017

In this study, gas turbine engine inlet duct was designed to satisfy uniform flow at aerodynamic interface plane (AIP). Haack-series was selected as nose cone profile and duct outer radius($r_o$) was designed to satisfy to match with area change rate between the nose cone and outer duct wall by the 1-D sizing. The design object of the inlet duct wall profile which has the gradual area change rate was uniform Mach number in the core flow region and minimum boundary later thickness at the both inner nose wall and outer duct wall. The flow characteristics inside the inlet duct was evaluated using CFD. The static pressure distribution at the AIP showed uniform pattern within 0.16%. Based on Mach number profile, the boundary layer thickness was 2% of channel height. Kiel temperature rake location was decided less than 100 mm in front of nose cone where the Mach number is less than 0.1 in order to maximize the temperature probe recovery rate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.441-448
• /
• 2016

The thrust force created by a propeller depends on the incoming flow velocity and the rotational velocity of the propeller. The performance of the propeller can be described by dimensionless variables, advanced ratio, thrust coefficient, and power coefficient. This study included the application of the immersed boundary lattice Boltzmann method (IBLBM) with the stereo lithography (STL) file of the rotating object for performance analysis. The immersed boundary method included the addition of the external force term to the LB equation defined by the velocity difference between the lattice points of the propeller and the grid points in the domain. The flow by rotating a 4-blade propeller was simulated with various Reynolds numbers (Re) (including 100, 500 and 1000), with advanced ratios in the range of 0.2~1.4 to verify the suggested method. The typical tendency of the thrust efficiency of the propeller was obtained from the simulation results of different advanced ratios. It was also necessary to keep the maximum mesh size ratio of the propeller surface to a grid size below 3. Additionally, a sufficient length of the downstream region in the domain was maintained to ensure the numerical stability of the higher Re and advanced ratio flow.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.18 no.1
• /
• pp.132-149
• /
• 1992

This study relates to a microemulsion gel which is applied in various cosmetic preparations because of good appearance, superior stability and a thin, uniform, non-greasy fi Am on the skin. Main object of this study is to elucidate the influence of polyol(clarifying agent and/or coupling agent in microemulsion) on microemulsion and to establish the optimum conditions for microemulsion gel formation in the view of superior consistency, stability, clarity and pick-up from a container. The constituents of the system are composed of water, polar ester oi1, nonionic surfactant and polyol. Using the three-component phase diagram and the tetrahedral-phase diagram, we have investigated the changes of transparence regions, consistency and resonance effect by an impact in microemulsion gel varying in polyol ratio. The results of this study showed that the variation in the content of water and couple ins agent has major influence on the microemulsion gel and the optimum formation region of microemulsion gel is the widest when the ratio of glycerine(coupling agent) to water is 63-75% It is believed that optimum use of polyol seems to be helpful to obtain the microemulsion gel containing maximum amount of oil phase with minimum amount of surfactant which is recently one of the major problems of cosmetic chemists.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.92-98
• /
• 2017

Generally, image contains geometrical and radiometric errors. Census transform can solve the stereo mismatching problem caused by the radiometric distortion. Since the general census transform compares center of window pixel value with neighbor pixel value, it is hard to obtain an accurate matching result when the difference of pixel value is not large. To solve that problem, we propose a census transform method that applies different 4-step weight for each pixel value difference by applying an assistance window inside the window kernel. If the current pixel value is larger than the average of assistance window pixel value, a high weight value is given. Otherwise, a low weight value is assigned to perform a differential census transform. After generating an initial disparity map using a weighted census transform and input images, the gradient information is additionally used to model a cost function for generating a final disparity map. In order to find an optimal cost value, we use guided filtering. Since the filtering is performed using the input image and the disparity image, the object boundary region can be preserved. From the experimental results, we confirm that the performance of the proposed stereo matching method is improved compare to the conventional method.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.403-408
• /
• 2005

Ankylosis is defined as a fusion of cementum or dentine with alveolar bone. Due to the loss of the periodontal ligament on the ankylotic area, the tooth is incapable of continued eruption and hence is unable to follow the normal vertical development of the neighboring teeth and alveolar process. A 6-year-old female was referred to the Dept. of Pediatric Dentistry for ankylosis of primary molars and congenital missing of permanent premolars on both jaws. She had neither specific past medical history nor trauma and infection history in oral and maxillofacial region. Radiographic finding is that the maxillary primary molars were the early onset of ankylosis and had fast root resorption rate. However the mandibular primary molars were ankylosed later and being resorbed slower than maxillary primary molars. The object of treating this case is to maintain the proper alveolar bone growth and retention of deciduous molars. The point of managing this case is as follows: Proper treatment (observation, restoration, or extraction) should be established after thorough consideration of the time of onset, the root resorption rate, progression of infraocclusion and the development of alveolar bone support. We should consider the timing of extraction of the ankylosed teeth without problem of neighbouring alveolar bone growth and tilting of adjacent teeth in the view of growth spurt. Early diagnosis is important to avoid many of the complications with infraoccluded primary molars.

• The KIPS Transactions:PartB
• /
• v.15B no.1
• /
• pp.25-36
• /
• 2008

In this paper, we present a robust hand recognition approach to sudden illumination changes. The proposed approach constructs a background model with respect to hue and hue gradient in HSI color space and extracts a foreground hand region from an input image using the background subtraction method. Eighteen features are defined for a hand pose and multi-class SVM(Support Vector Machine) approach is applied to learn and classify hand poses based on eighteen features. The proposed approach robustly extracts the contour of a hand with variations in illumination by applying the hue gradient into the background subtraction. A hand pose is defined by two Eigen values which are normalized by the size of OBB(Object-Oriented Bounding Box), and sixteen feature values which represent the number of hand contour points included in each subrange of OBB. We compared the RGB-based background subtraction, hue-based background subtraction and the proposed approach with sudden illumination changes and proved the robustness of the proposed approach. In the experiment, we built a hand pose training model from 2,700 sample hand images of six subjects which represent nine numerical numbers from one to nine. Our implementation result shows 92.6% of successful recognition rate for 1,620 hand images with various lighting condition using the training model.

• Land and Housing Review
• /
• v.4 no.3
• /
• pp.225-234
• /
• 2013

The indices to choose the object countries for developing overseas industrial park were developed and applied in this paper. The results are showing as follows. First, the Korean enterprises are branched out into total 128 countries as of the first quarter of 2010, and the 13 asian countries including China, Vietnam, Japan, and Hongkong shows the majority of precedence 20 countries among the reported during 1980-2010. Second, the 3 steps of selecting the principal region to branch out, establishing assessment indices and criteria, and choosing strategical target counties were developed to choose the countries for developing overseas industrial park. The 38 of 128 countries were selected where the GDP per capita is lower than Korea, and the local reports of incorporation during 2007-2010 are more than 10 times. Then, the 10 countries were excluded where the minimum wages during 2008-2009 are similar to Korean ($815/month). Consequently, the 28 countries including China, Vietnam, and Cambodia etc. were selected as the major target regions. Third, the indices to choose countries for developing overseas industrial park are classified into 5 categories-investment condition, labor market flexibility, potential market demand, population, changing rate of the reported number of manufacturing industry, and detailed indices for each category were selected, then the weight were given with the consideration of importance. Finally, Indonesia, Mongolia, and Uzbekistan were selected as the strategical target counties where acquire the high score in labor market flexibility and investment condition, relatively undeveloped, and friendly to Korea.