• 전자공학회논문지SC
• /
• 제45권6호
• /
• pp.102-107
• /
• 2008

플랜트의 정보를 알지 못 하는 경우 시험신호로 포화함수와 시간지연 요소를 이용하여 플랜트의 정보를 찾아내고 찾아낸 정보로 PI 제어기를 설계하는 방법을 제시하였다. 시간 지연요소를 이용함으로서 PI 제어기의 I 요소로부터 발생되는 위상 감소로 인해 발생되는 불안정성이 발생하지 않도록 플랜트의 Nyquist 그림에서 3/4 분면에 있는 한 점의 정보를 찾아내는 것이 가능하였다. 제안된 방법은 포화함수의 이용으로 정확성이 높고 한 개의 포화함수만을 이용하여 구조가 간단하다. 또한 모의시험을 통해 제안된 방법의 타당성을 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.346.1-346.1
• /
• 2014

Porous nano crystalline $TiO_2$ is currently used as a working electrode in a dye-sensitized solar cell (DSSC). The conventional working electrode is comprised of absorption layer (particle size:~20 nm) and scattering layer (particle size:~300 nm). We inserted window layer with 10 nm particle size in order to increase transmittance and specific surface area of $TiO_2$. The electrochemical impedance spectroscope analysis was conducted to analysis characterization of the electronic behavior. The Bode phase plot and Nyquist plot were interpreted to confirm the internal resistance caused by the insertion of window layer and carrier lifetime. The photocurrent that occurred in working electrode, which is caused by rise in specific surface area, increased. Accordingly, it was found that insertion of window layer in the working electrode lead to not only effectively transmitting the light, but also increasing of specific surface area. Therefore, it was concluded that insertion of window layer contributes to high conversion efficiency of DSSCs.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1605-1610
• /
• 2010

In this paper, the relative stability of magnetic bearing system for the flywheel energy storage is evaluated using both simulation and experimental analysis. We make the simulation model for the magnetic bearing flywheel system using the rigid body shaft model. According to international standard ISO 14839-3, We experimentally analyzed the relative stability of magnetic bearing system. Additionally using both the simulation model and experimental tests, Phase margin and Gain margin is acquired through Nyquist plot.

• 한국수소및신에너지학회논문집
• /
• 제20권4호
• /
• pp.283-290
• /
• 2009

This study focuses on the performance characteristics of polymer electrolyte membrane fuel cell (PEMFC) using the AC impedance technique. The experiment was carried out to investigate the optimal operating conditions of PEMFC such as cell temperature, flow rate, humidified temperature and back-pressure. The fuel cell performance was analyzed by DC electronic-loader with constant voltage mode and expressed by voltage-current density. Additionally, AC impedance was measured to analysis of ohmic and activation loss and expressed by Nyquist plot. The results showed that the cell performance increased with increase of cell temperature, air flow rate, humidified temperature and backpressure. Also, the activation loss decreased as the increase of cell temperature, air flow rate, humidified temperature and backpressure.

• Journal of Electrochemical Science and Technology
• /
• 제11권3호
• /
• pp.318-321
• /
• 2020

Here I present a formula which converts a constant phase element (CPE) to its equivalent capacitor. Electrochemical impedance spectroscopy is capable of resolving a complex electrochemical processes into its faradaic and non-faradaic elements, and the non-faradaic process is frequently described as a CPE in place of a capacitor due to the non-ideality. Being described as a capacitor, the non-faradaic element provides information by its capacitance, but a CPE cannot provide a physical meaning. In order to solve the problem, the CPE has been dealt with as an equivalent capacitor of which the capacitance provides practical information. Succeeding the two methods previously suggested, a new conversion method is suggested in this report. While the previous ones manipulate only the CPE, the new method takes both the CPE and its related resistor into account for conversion. By comparing the results obtained by the three methods, we learn that the results are nearly the same within tolerable ranges, and conclude that any of the method choices is acceptable depending on the conditions of the system of interest.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.99-105
• /
• 2008

Southern exposure test specimens were used to evaluate corrosion performance of epoxy-coated reinforcing bars in chloride contaminated concrete by electrochemical impedance spectroscopy method. The test specimens with conventional bars, epoxy-coated bars and corrosion inhibitors were subjected 48 weekly cycles of ponding with sodium chloride solution and drying. The polarization resistance obtained from the Nyquist plot was the key parameter to characterize the degree of reinforcement corrosion. The impedance spectra of specimens with epoxy-coated bars are mainly governed by the arc of the interfacial film and the resistance against the charge transfer through the coating is an order of magnitude higher than that of the reference steel bars. Test results show good performance of epoxy-coated bars, although the coatings had holes simulating partial damage, and the effectiveness of corrosion-inhibiting additives. The corrosion rate obtained from the impedance spectroscopy method is equivalent to those determined by the linear polarization method for estimating the rate of corrosion of reinforcing steel in concrete structures.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.326-328
• /
• 2009

we an autotuning algorithm for PI controller with unknown plant. The proposed algorithm uses a saturation function and time delay element as a test signal. Since the integral element of PI controller reduces a phase margin and amplitude margin in the closed loop system, the closed loop system could be resulted in unstable with PI controller, To avoid unstable in the closed loop system with PI controller, the proposed algorithm identifies one point information in the 3rd quadrant of Nyquist plot with a time delay element. The proposed method improves an accuracy of one point identified information with one saturation function.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.1-9
• /
• 2004

The impedance and the subsequent proton conductivity of Nafion$\^$/ membranes as standard samples were measured and compared via the two-probe method and the four-probe method using the prepared impedance measurement system. The different impedance behavior for the same membrane was observed at the fully hydrated state in the Nyquist impedance plot. The effect of the humidity and the temperature on the proton conduction through a membrane was investigated and compared with two different cell configurations.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권3호
• /
• pp.87-95
• /
• 2020

EIS를 이용한 아크 금속용사 표면처리기법이 적용된 강재의 콘크리트 내 부식거동에 관한 실험적 연구로서 콘크리트 내부환경을 모사한 Ca(OH)₂ 포화수용액 침지 및, NaCl 수용액에서의 침지실험을 통해 부식거동을 실험하였다. Nyquist plot의 분석을 통하여 등가회로를 도출하였으며 Ca(OH)₂ 수용액에서의 계면저항과 분극저항을 비교한 결과 계면저항은 Al ATMS가 가장 우수하였으며 분극저항은 Zn ATMS가 가장 우수한 것으로 나타났다. 시멘트 모르타르에 금속용사 표면처리 된 강재를 매립후 NaCl 수용액에 침지하여 침지 시간에 따른 임피던스 측정에서는 초기 침지 임피던스 측정값은 Zn ATMS시험체가 가장 높았으나 침지 2주후에는 Al ATMS 시험체의 임피던스가 가장 높고 안정적으로 나타났다. 이는 이온화 경향이 높은 Al이 강알칼리 환경에서 지속적으로 산화하며 피막을 형성하였으며, 염소 이온의 침투로부터 강재를 보호하기 때문으로 판단된다.

• Corrosion Science and Technology
• /
• 제16권5호
• /
• pp.257-264
• /
• 2017

Film of new Ti-15Zr-5Nb alloy formed during galvanic anodizing in orthophosphoric acid solution was characterized by optical microscope, scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and Raman micro-spectroscopy. Its anticorrosive properties were determined by electrochemical techniques. The film had a layer with nanotube-like porosity with diameters in 500-1000 nm range. The nano layer contained significant amounts of P and O as well as alloying element. Additionally, Raman micro-spectroscopy identified oxygen as oxygen ion in $TiO_2$ anatase and phosphorous as $P_2O_7{^{4-}}$ ion in phosphotitanate compound. All potentiodynamic polarization curves in artificial Carter-Brugirard saliva with pH values (pH= 3.96, 7.84, and 9.11) depending on the addition of 0.05M NaF revealed nobler behavior of anodized alloy and higher polarization resistance indicating the film is thicker and more compact nanolayer. Lower corrosion rates of the anodized alloy reduced toxicity due to less released ions into saliva. Bigger curvature radii in Nyquist plot and higher phase angle in Bode plot for the anodized alloy ascertain a thicker, more protective, insulating nanolayer existing on the anodized alloy. Additionally, ESI results indicate anodized film consists of an inner, compact, barrier, layer and an outer, less protective, porous layer.