• The Journal of the Acoustical Society of Korea
• /
• v.42 no.5
• /
• pp.403-411
• /
• 2023

Functional ultrasound imaging, such as elasticity imaging and micro-blood flow Doppler imaging, enhances diagnostic capability by providing useful mechanical and functional information about tissues. However, the implementation of functional ultrasound imaging poses limitations such as the storage of vast amounts of data in Radio Frequency (RF) data acquisition and processing. In this paper, we propose a sub-Nyquist approach that reduces the amount of acquired axial samples for efficient shear-wave elasticity imaging. The proposed method acquires data at a sampling rate one-third lower than the conventional Nyquist sampling rate and tracks shear-wave signals through RF signals reconstructed using band-pass filtering-based interpolation. In this approach, the RF signal is assumed to have a fractional bandwidth of 67 %. To validate the approach, we reconstruct the shear-wave velocity images using shear-wave tracking data obtained by conventional and proposed approaches, and compare the group velocity, contrast-to-noise ratio, and structural similarity index measurement. We qualitatively and quantitatively demonstrate the potential of sub-Nyquist sampling-based shear-wave elasticity imaging, indicating that our approach could be practically useful in three-dimensional shear-wave elasticity imaging, where a massive amount of ultrasound data is required.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.126-136
• /
• 1997

When we apply the spectrally efficient quadrature amplitude modulation(QAM) to mobile communications, it is necessary to estimate and compensate the channel charac- teristics. In this paper, a new type fading estimation method for PSAM using sinc function is presented. Gaussian interpolation method has a drawback that the performance degrades rapidly if pilot symbol period increases even though pilot sysbol period is less than Nyquist sampling rate. The Wiener filter method does not degrade until pilot symbol period is equal to the Nyquist sampling rate. It is difficult for Wiener filter method to be applied to real system because autocorrelation function of channel gain, Doppler frequency and SNR(signal to noise ratio) must be known to optimize the filter coefficients. But proposed method has a similar performance to the Wiener filter method, and does not need to know the autocorrelation function of channel gain, the doppler frequency and SNR. Therefore the proposed method cna be applied to real system easily.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.27-35
• /
• 1998

In this paper, we propose a novel spectral-chopping model of Class-II$(1+D)^2$ -PRS system which reveals improved spectral efficiency. We build up the model having spectrum chopped by the amount of Nyquist over-rate, and then compare its characteristics with the conventional model in both the time-domain and the frequency-domain. When the transmission system operates above the Nyquist rate, the new model has better performance than the conventional PRS using its inherent speed-tolerance. According to our investigations, Class-II PRS shows more excellent effect in the spectral-chopping method than Class- I and W types analyzed previously. We ascertain that the over-rate of 26.675 obtained by the inherent speed-tolerance could be improved upto 40% using spectrum-truncation. These effects come from the fact that the raised-cosine spectrum of Class-II PRS has smaller Boss of frequency component and energy than any other types for the same amount of truncation. In order to validate these theoretical results, we present their sidelobe-trends confirming cancellation effects at the sampling instants and some experimental results showing their patterns of eye-openings and spectra.

• Smart Structures and Systems
• /
• v.22 no.1
• /
• pp.41-55
• /
• 2018

Damping ratio and frequency have influence on dynamic serviceability or instability such as vortex-induced vibration and displacement amplification due to earthquake and critical flutter velocity, and it is thus important to make determination of damping ratio and frequency accurate. As bridges are getting longer, small scale model test considering similitude law must be conducted to evaluate damping ratio and frequency. Analysis conditions modified by similitude law are applied to experimental test considering different scale ratios. Generally, Nyquist frequency condition based on natural frequency modified by similitude law has been used to determine sampling rate for different scale ratios, and total time length has been determined by users arbitrarily or by considering similitude law with respect to time for different scale ratios. However, Nyquist frequency condition is not suitable for multimode system with noisy signals. In addition, there is no specified criteria for determination of total time length. Those analysis conditions severely affect accuracy of damping ratio. The focus of this study is made on the determination of minimum analysis conditions for different scale ratios. Influence of signal to noise ratio is studied according to the level of noise level. Free initial value problem is proposed to resolve the condition that is difficult to know original initial value for free vibration. Ambient and free vibration tests were used to analyze the dynamic properties of a system using data collected from tests with a two degree-of-freedom section model and performed on full bridge 3D models of cable stayed bridges. The free decay is estimated with the stochastic subspace identification method that uses displacement data to measure damping ratios under noisy conditions, and the iterative least squares method that adopts low pass filtering and fourth order central differencing. Reasonable results were yielded in numerical and experimental tests.

• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.193-198
• /
• 2019

This study analyzed the changes of vowel formant, voice intensity, and fundamental frequency of vowels for 11 months using acoustochemical spectrogram analysis of women diagnosed with amyotrophic lateral sclerosis (ALS). The test word was a vowel /a, i, u/ and a diphthong /h + ja + da/, /h + wi + da/, and /h +ɰi+ da/. Speech data were collected through the word reading task presented on the monitor using 'Alvin' program, and the recording environment was set to 5,500 Hz for the nyquist frequency and 11,000 Hz for the sampling rate. The records were analyzed by using spectrograms to vowel formants, voice intensity, and fundamental frequency. As a result of analysis, the fundamental frequency and intensity of the ALS process were decreased and the formant slope of the diphthong was decreased rather than the formant change in the vowel. This result suggests that the vowel distortion of ALS due to disease progression is due to the decrease of tongue and jaw co morbidity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.584-590
• /
• 2003

In this paper, the numerical characteristics of the recently developed Envelope ADI-FDTD are investigated. Through numerical simulations, it is shown that the unconditional stability of the Envelope ADI-FDTD is independent of time step size and we can get better dispersion accuracy than the traditional ADI-FDTD by analyzing the envelope of the signal. This fact gives the opportunity for extending the temporal step size to the Nyquist limit in certain cases. Numerical results show that the Envelope ADI-FDTD can be used as an efficient electromagnetic analysis tool especially in the single frequency or band limited systems.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1678-1685
• /
• 1993

This paper considers a time delay control of noncolocated flexible mechanical systems in discrete time domain. A stability criterion suggested in the previous paper is,extended in the consideration of infinite mode property of flexible systems and finite control sampling frequency. Based on the stability criterion, the one step advanced discrete time derivative control is suggested, which can stabilize infinite number of modes of a flexible system. The sensitivity analysis shows the robustness of the one step advanced control to the system parameter uncertainties and time delay errors. Application to a simply supported beam verifies the extended stability criterion and the effectiveness of the one step advanced D-control.

• Korean Journal of Remote Sensing
• /
• v.16 no.2
• /
• pp.177-188
• /
• 2000

Quantitative accuracy assessment of a SPOT DEM (Digital Elevation Model) generated by a fully automatic software is performed along the 90km long coast around Donghae city. The theoretical requirement on the layout of the CPS (Global Positioning System) check points is derived: the Nyquist sampling. Since in practice the Nyquist frequency of a terrain is difficult to determine, the relaxed requirements are introduced and 31 check points are collected accordingly. Accuracy of the SPOT DEM is calculated to be 8.9, 11.5 and 12.0m r.m.s. in latitudinal, longitudinal and elevation directions. The bias is distinguishable from zero only for elevation and is 2.2m. The simple comparison with the world's leading commercial softwares reveals the similar accuracy level.

• Journal of Biomedical Engineering Research
• /
• v.16 no.2
• /
• pp.183-190
• /
• 1995

The use of ultrasound pulsed Doppler systems has become increasingly popular due to the advantages of easy measurements of blood velocity, volume blood blow, and irregularities of the circulatory system. However, the 2-D Doppler systems have several problems, such as range ambiguity, low signal to noise ratio, and slow frame rate. The mean frequency aliasing problem originating from the pulse repetition frequency is one of major limitations in pulsed Doppler systems. A conventional approach to resolve this problem is tracking the mean frequency close to and beyond the Nyquist frequency along the temporal axis. In this paper, a new concept of tracking the mean frequency along the spatial axis is proposed. The proposed technique is fault tolerant by nature and more suitable for multi gate and 2-D Doppler system than conventional methods.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2007

In this paper, the necessary and sufficient conditions for strict positive realness of the rational transfer functions directly from basic definitions in the frequency domain are studied. A new frequency domain approach is used to check if a rational transfer function is a strictly positive real or not. This approach is based on the Taylor expansion and the Maximum Modulus Principle which are the fundamental tools in the complex functions analysis. Four related common statements in the strict positive realness literature which is appeared in the control theory are discussed. The drawback of these common statements is analyzed through some counter examples. Moreover a new necessary condition for strict positive realness is obtained from high frequency behavior of the Nyquist diagram of the transfer function. Finally a more simplified and completed conditions for strict positive realness of single-input single-output linear time-invariant systems are presented based on the complex functions analysis approach.