• The Journal of the Acoustical Society of Korea
• /
• v.22 no.2
• /
• pp.153-161
• /
• 2003

In this paper, we propose a wavelet-based detection method to identify efficiently the time-delay or multipath channel of ocean acoustic signals due to complex ocean medium and boundary layers. Our proposed method employs wavelet packet transform to analyze the received broadband acoustic signals and applies the matched filter to determine the time region of interest. Also, we present numerical testing that results on both the simulated and real data revealed the efficiency of this method in time-delay estimation and moreover its capability in estimating the time-delay of individual path in multipath channel, in which the arrival patterns are too close to be separated by the matched filter method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.318-322
• /
• 2009

Supersonic ejectors are simple mechanical components, which generally perform mixing and/or recompression of two fluid streams. Ejectors have found many applications in engineering. In aerospace engineering, they are used for altitude testing of a propulsion system by reducing the pressure of a test chamber. It is composed of three major sections: a vacuum test chamber, a propulsive nozzle, and a supersonic exhaust diffuser. This paper aims at the improvement of ejector-diffuser performance by focusing attention on reducing exhaust back flow into the test chamber, since alteration of the backflow or recirculation pattern appears as one of the potential means of significantly improving low supersonic ejector-diffuser performance. The simplest backflow-reduction device was an orifice plate at the duct inlet, which would pass the jet and entrained fluid but impede the movement of fluid upstream along the wall. Results clearly showed that the performance of ejector-diffuser system was improved for certain a range of system pressure ratios, where as there was no appreciable transition in the performance for lower pressure ratios and the orifice plate was detrimental to the ejector performance for higher pressure ratios. It is found that an appropriately sized orifice system should produce considerable improvement in the ejector-diffuser performance in the intended range of pressure ratios.

• Structural Engineering and Mechanics
• /
• v.21 no.2
• /
• pp.205-220
• /
• 2005

This paper presents the possibilities of adapting artificial neural networks (ANNs) to predict the dimensionless parameters related to the maximum contact pressures of an elasticity problem. The plane symmetric double receding contact problem for a rigid stamp and two elastic strips having different elastic constants and heights is considered. The external load is applied to the upper elastic strip by means of a rigid stamp and the lower elastic strip is bonded to a rigid support. The problem is solved under the assumptions that the contact between two elastic strips also between the rigid stamp and the upper elastic strip are frictionless, the effect of gravity force is neglected and only compressive normal tractions can be transmitted through the interfaces. A three layered ANN with backpropagation (BP) algorithm is utilized for prediction of the dimensionless parameters related to the maximum contact pressures. Training and testing patterns are formed by using the theory of elasticity with integral transformation technique. ANN predictions and theoretical solutions are compared and seen that ANN predictions are quite close to the theoretical solutions. It is demonstrated that ANNs is a suitable numerical tool and if properly used, can reduce time consumed.

• Computational Structural Engineering
• /
• v.9 no.1
• /
• pp.93-99
• /
• 1996

In the particular situations where the crack is terminated at an interface of two materials, the order of stress singularity depends on the elastic constants which specify the properties of two materials. A multidomain boundary element technique is used to solve a crack normal to bimaterial interface. A correct order of shape function is used for displacement by using the isoparametric elements by shifting adequately the side nodes adjacent to this crack tip. A shape function containing the same order of singularity as that in the interface crack is also used for the interpolation of traction. Numerical testing of a binaterial with a crack normal to the interface is carried out with three-node elements. The results obtained are compared with the previous solutions.

• Journal of Environmental Science International
• /
• v.10 no.3
• /
• pp.217-223
• /
• 2001

Where no records are available at a site, a preliminary estimate may be made from relations between floods and catchment chatacteristics. A number of these chatacteristics were chosen for testing and were measured for those catchments where mean annual flood estimates were available. Although the improvement using extended data in regression of flood estimates on catchment characteristics was small, this may be due to the limitations of the regression model. When an individual short term record is to be extended, more detailed attention can be given; an example is presented of the technique which should be adopted in practice, particularly when a short term record covers a period which is known to be biassed. A method of extending the peaks over a threshold series is presented with a numerical example. The extension of records directly from rainfall by means of a conceptual model is discussed, although the application of such methods is likely to be limited by lack of recording raingauge information. Methods of combining information from various sources are discussed in terms of information from catchment characteristics supplemented by records. but are generally applicable to different sources of information. The application of this technique to estimating the probable maximum flood requires more conservative assumptions about the antecedent condition, storm profile and unit hydrograph. It is suggested that the profile and catchment wetness index at the start of the design duration should be based on the assumption that the estimated maximum rainfall occurs in all durations centered on the storm peak.

• Journal of Korean Academy of Nursing
• /
• v.40 no.2
• /
• pp.236-246
• /
• 2010

Purpose: The purpose of this study was to develop and evaluate a Korean questionnaire to measure resilience in children with chronic illness. Methods: Item construction was drawn from an extensive review of the literature, existing questionnaires and interviews with parents. Content validity was tested by experts. To further refine the questionnaire and test its reliability and validity, data were collected from the 202 children with asthma, diabetes mellitus or nephrotic syndrome. Corrected items were used to total correlation coefficient and test-retest reliability. Questionnaire testing was conducted using factor analysis, Cronbach's $\alpha$, and correlation coefficients. Validity of the questionnaire was tested using internal consistency, construct validity, and criterion-related validity. Results: Components of the questionnaire were in three domains; interpersonal characteristics, characteristics of coping, and intrapersonal characteristics. Factor analysis is showed five factors; positive self-understanding, self-reliance, resourcefulness, perception of positive family relationships, and intimacy. The questionnaire showed a high internal consistency. A significant positive correlation with the Numerical Rating Score and negative correlation with the Child Depression Inventory support the validity of the questionnaire. Conclusion: This instrument demonstrated high reliability and validity. Therefore, this instrument can contribute to the evaluation of resilience of chronically ill children and to any subsequent intervention as well as to develop a theory for resilience.

• Convergence Security Journal
• /
• v.12 no.6
• /
• pp.3-10
• /
• 2012

In this paper, make a study decision problem called an optimal release policies after testing a software system in development phase and transfer it to the user. When correcting or modifying the software, finite failure non-homogeneous Poisson process model, considering learning factor, presented and propose release policies of the life distribution, log linear type model which used to an area of reliability because of various shape and scale parameter. In this paper, discuss optimal software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement. In a numerical example, the parameters estimation using maximum likelihood estimation of failure time data, make out estimating software optimal release time.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.5
• /
• pp.212-219
• /
• 2002

In this paper, the epipolar geometry, genera17y used as a pin-hole camera model, is newly adapted to our proposed method that enables the affine reconstruction of the 3D object from two projected views. The proposed method models the projective projection of inherent X-ray imaging system, obviates the need to attach artifirially constructed material on the body, and requires none of the prior-knowledge regarding to intrinsic and extrinsic parameters of two X-ray imaging systems. The optimum numerical solution is obtained by applying the least mean square estimator to corresponding points on two projected X-ray planes. The performance of this proposed method is Quantitatively analyzed using computer synthesized model of Cochlear implantation electrodes. In simulated experiments, the propnsed method is insensitive to the added random noise, the scaling factor change, the center point change, and rotational angular change between two projection planes, as well as enables the stable 3D reconstruction in least square sense even in worst testing cases.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2009

Let us consider that the variance function in regression model has a discontinuity/change point at unknown location. Yu and Jones (2004) proposed the local polynomial fit to estimate the log-variance function which break the positivity of the variance. Using the local polynomial fit, Huh (2008) estimate the discontinuity point of the log-variance function. We propose a test for the existence of a discontinuity point in the log-variance function with the estimated jump size in Huh (2008). The proposed method is based on the asymptotic distribution of the estimated jump size. Numerical works demonstrate the performance of the method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.4
• /
• pp.15-25
• /
• 1989

This paper presents the results of the numerical analysis on the behavior of cable-stayed bridge considering geometric nonlinearity of cables. Finite element method is used and geometric nonlinearities are considered on the analysis of cable-stayed bridge. The governing equilibrium equations are derived by the principle of virtual work, and modified Newton-Raphson method and Newmark-${\beta}$ method are employed in response calculations. The validity of this study is demonstrated by comparing the examples with analytical results by other method and testing results.