• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1235-1242
• /
• 2006

Viscoelastic damping materials are widely used to reduce noise and vibration because of its low cost and easy implementation, for examples, on the body structure of passenger cars, air planes, electric appliances and ships. To design the damped structures, the material property such as elastic modulus and loss factor is essential information. The four-parameter fractional derivative model well describes the nonlinear dynamic characteristics of the viscoelastic damping materials with respect to both frequency and temperature with fewer parameters than conventional spring-dashpot models. However the identification procedure of the four-parameter is very time-consuming one. An efficient identification procedure of the four-parameters is proposed by using an FE model and a gradient-based numerical search algorithm. The identification procedure goes two sequential steps to make measured FRFs coincident with simulated FRFs: the first one is a peak alignment step and the second one is an amplitude adjustment. A numerical example shows that the proposed method is efficient and robust in identifying the viscoelastic material parameters of fractional derivative model.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.75-84
• /
• 2011

In this paper various numerical analyses are carried out according to behavior characteristics of structures and types of seismic design methods as a study on the seismic analysis for underground structures. Equivalent Static Force Procedure and Response Displacement Method commonly used in practiral design are adopted and Time History Method regarded as the most accurate analysis method is selected to verify the results of two practical methods above. 3-D modelling for seismic analysis of structures is introduced to consider Structure Soil Interaction and all analyses are based on Korea Structural Concrete Design Code. After numerical analyses, Equivalent Static Force Procedure and Response Displacement Method showed relatively lager values than those of Time History Method, so it is identified that above two methods are suitable for practical design purpose.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.72-82
• /
• 1990

A simple numerical analysis procedure has been proposed to trace the response of unstiffened offshore tubular members subjected to lateral impacts and eventually to estimate the consequential extent of damage. In the procedure a tubular member is reduced to a spring-mass system having two degrees-of-freedom. one for local denting deformation and the other for that of overall bending. Results of impact tests have been correlated with those of numerical analysis in order to achieve an empirical representation of the strain-rate sensitivity and other dynamic effects upon the spring coefficient for bending deformation. The theoretical estimates of extents of damage correlate reasonably well with those obtained in experiments.

• Steel and Composite Structures
• /
• v.20 no.6
• /
• pp.1345-1368
• /
• 2016

This paper presents the probabilistic-based assessment of composite steel-concrete structures through an innovative framework. This framework combines model identification and reliability assessment procedures. The paper starts by describing current structural assessment algorithms and the most relevant uncertainty sources. The developed model identification algorithm is then presented. During this procedure, the model parameters are automatically adjusted, so that the numerical results best fit the experimental data. Modelling and measurement errors are respectively incorporated in this algorithm. The reliability assessment procedure aims to assess the structure performance, considering randomness in model parameters. Since monitoring and characterization tests are common measures to control and acquire information about those parameters, a Bayesian inference procedure is incorporated to update the reliability assessment. The framework is then tested with a set of composite steel-concrete beams, which behavior is complex. The experimental tests, as well as the developed numerical model and the obtained results from the proposed framework, are respectively present.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.41-50
• /
• 1994

An iterative time marching procedure for solving incompressible viscous flows has been applied to the flow around a propeller. This procedure solves three-dimensional Navier-Stokes equations on a moving, body-fitted, non-orthogonal grid using first-order accurate scheme for the time deivatives and second-and third-order accurate schemes for the spatial derivatives. To accelerate iterative process, a multigrid technique has been applied. This procedure is suitable for efficient execution on the current generation of vector or massively parallel computer architectures. Generally good agreement with published experimental and numerical data has been obtained. It was also found that the multigrid technique was efficient in reducing the CPU time needed for the simulation and improved the solution quality.

• Tunnel and Underground Space
• /
• v.15 no.3 s.56
• /
• pp.228-235
• /
• 2005

Friction angle and cohesion of rock masses can be estimated from Hoek and Brown failure criterion and then plastic corrections can be applied using Mohr-Coulomb yield function. This study finds that this estimation procedure would not be appropriate for weak rock masses and for cases where low confining stress is expected to develop. A procedure is outlined in this paper for estimating plastic corrections directly from Hoek and Brown material model. Comparative study shows that direct procedure would simulate non-linear failure surface better than indirect procedure especially in the low confining stress regime.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.5
• /
• pp.27-36
• /
• 2018

The purpose of this paper is to apply the numerical solution procedure to compute conduction time series factors (CTSF) for construction materials with large thermal capacities. After modifying the procedure in Ref. [9], it is applied to find the CTSF for the wall type 19 and the roof type 18 of ASHRAE. The response periods for one hr pulse load are longer than 24hrs for these wall and roof. The CTSF generated using modified procedure agree well with the values presented in the ASHRAE handbook. The modified procedure is a general procedure that can be applied to find CTSF for materials with complex structures. For the large thermal capacity materials, it should be checked whether thermal response period of the material is over 24hr or not. With suggested solution procedure, it is easy to check the validity of the CTSF based on 24hr period.

• Journal of Mechanical Science and Technology
• /
• v.15 no.4
• /
• pp.422-432
• /
• 2001

There are many analysis formulas for determining the resultant shear force in welds. However, there is no general procedure which is applicable to a joint with all six possible loadings exerted simultaneously. A numerical methodology and computer program for such a problem were developed, and they are capable of analyzing a weld of any shape composed of straight or circular line segments. The computer program developed in this study can also display the design procedures and results using computer graphics. The development of such a design procedure and an interactive computer program for weldments analysis will lead to lower cost.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.5
• /
• pp.1037-1044
• /
• 2012

Multivariate control charts for effectively monitoring every component in the dispersion matrix of multivariate normal process are considered. Through the numerical results, we noticed that the multivariate control charts based on sample statistic $V_i$ by Hotelling or $W_i$ by Alt do not work effectively when the correlation coefficient components in dispersion matrix are increased. We propose a combined procedure monitoring every component of dispersion matrix, which operates simultaneously both control charts, a chart controlling variance components and a chart controlling correlation coefficients. Our numerical results show that the proposed combined procedure is efficient for detecting changes in both variances and correlation coefficients of dispersion matrix.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.324-331
• /
• 2000

In this study, a new algorithm analyzing dynamic crack propagation problem by the coupling technique of Meshfree Method and Finite Element Method is proposed. The coupling procedure of two methods is presented with a short description of Meshfree Method especially, Element-free Galerkin (EFG) method. The elastodynamic fracture theory is presented, and a numerical implementation procedure for dynamic fracture analysis by Meshfree Method is also discussed. A couple of dynamic crack propagation problems illustrate the performance of the propsed technique. The accuracy of numerical solutions by the developed algorithm are compared with those of analytical solutions and experimental ones.