• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2684-2689
• /
• 2007

Non-equilibrium first order extrapolation boundary condition proposed by Guo et $al.^{(9)}$ proposed has a good application for complex geometries, a second order accuracy and a treatment on non-slip wall boundary condition easily. However it has a lack of the numerical stability from high Reynolds number. Guo et $al.^{(9)}$ substituted the density value of adjacent nodes for the density of boundary nodes. This procedure causes the numerical instability on the boundary. In this paper, we derived a procedure of density extrapolation and compared to previous results.

• 한국전산유체공학회지
• /
• 제5권1호
• /
• pp.43-59
• /
• 2000

Characteristic boundary conditions are discussed in conjunction with a flux-difference splitting formulation as modified from Roe's linearization. Details of how one can implement the characteristic boundary conditions which are made compatible with the interior point formulation are described for different types of boundaries including subsonic outflow and adiabatic wall. The validity of boundary conditions are demonstrated through computation of transonic airfoil, supersonic ogive-cylinder, hypersonic cylinder, and S-duct internal flows. The computed wall pressure distributions are compared with published experimental and computed data. Objectives of this paper are thus to give insight of formulation procedure of a flux-difference splitting method and to pave ways for other users to adopt present boundary procedure on their numerical methods.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.261-265
• /
• 2011

An adaptive wavelet transformation method with high order accuracy is proposed to allow efficient and accurate flow computations. While maintaining the original numerical accuracy of a conventional solver, the scheme offers efficient numerical procedure by using only adapted dataset. The main algorithm includes 3rd order wavelet decomposition and thresholding procedure. After the wavelet transformation, 3rd order of spatial and temporal accurate high order interpolation schemes are executed only at the points of the adapted dataset. For the other points, high order of interpolation method is utilized for residual evaluation. This high order interpolation scheme with high order adaptive wavelet transformation was applied to unsteady Euler flow computations. Through these processes, both computational efficiency and numerical accuracy are validated even in case of high order accurate unsteady flow computations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.405-410
• /
• 2002

In this paper, numerical method of evaluating the influence of Dual Mass Flywheel(DMFW) to the torsional vibration of the automotive power train system is developed. And we applied the procedure to the currently being developed HMC's DMFW attached to an FF car to find out the best performance characteristics during the Tip-in/Tip-out operating condition. In doing this we compared the numerical results with the experimental results and Performed Parametric studies. We find out that the torsional vibrational characteristics of power train system can be significantly improved when we optimally choose DMFW, and the developed numerical procedure could be used as valuable tools in developing new DMFW.

• Computational Structural Engineering : An International Journal
• /
• 제2권1호
• /
• pp.43-50
• /
• 2002

This paper presents a method to predict dynamic responses of floating bodies in the time domain. Because of the frequency-dependence of the radiation wave forces, the memory effect must be taken into account when the responses are evaluated in the time domain. Although the formulations firstly developed by Cummins (1962) have been well-known for this purpose, the effective numerical procedure has not been established yet. This study employs FFT (Fast Fourier Transform) algorithm to evaluate the memory effect function, and the equations of motion of an integro-differential type are solved by Newmark-β method. Numerical examples for a truncated circular cylinder have indicated the effectiveness of the proposed numerical procedure.

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.273-280
• /
• 2007

The numerical methods for finding the optimal parameters in 640 Gbps (16 channels $\times$ 40 Gbps) WDM system with optical phase conjugator (OPC) are proposed, which effectively compensate the distorted overall WDM channels. The considered optimal parameters are the OPC position and the dispersion coefficient of fibers. The numerical approaches are accomplished through two different procedures. One of these procedures is that the optimal OPC position is previously searched and then the optimal dispersion coefficient is searched at the obtained optimal OPC position. The other is the reverse of the above procedure. From the numerical results, it is confirmed that two optimal parameters depend on each other, but less related with the searching procedure. The methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which is a serious problem of applying the OPC into multi-channels WDM system.

• Structural Engineering and Mechanics
• /
• 제77권4호
• /
• pp.523-533
• /
• 2021

The present study investigates the lateral torsional buckling behaviour of pultruded glass fiber reinforced polymer (GFRP) simply supported channel beams subjected to uniform bending about their major axis. A parametric study by varying the sectional geometry and span of channel beams is carried out by using ABAQUS software. The accuracy of the FE models was ensured by verifying them against the available results provided in the literature. The effect of geometric nonlinearity, geometric imperfections, and the dependency of finite element mesh on the lateral torsional buckling were carefully considered in the FE model. Lateral torsional buckling (LTB) strengths obtained from the numerical study were compared with the theoretical LTB strengths obtained based on the Eurocode 3 approach for steel sections. The comparison between the numerical strengths and the design procedure proposed in the literature based on Eurocode 3 approach revealed disagreements. Therefore, a simplified improved design procedure is proposed for the safe design strength prediction of pultruded GFRP channel beams. The proposed equation has been provided that might aid the structural engineers in economically designing the pultruded GFRP channel beams in the future.

• Advances in nano research
• /
• 제13권6호
• /
• pp.599-617
• /
• 2022

In the present research, for the first time, the vibrational as well as buckling characteristics of a three-layered curved nanobeam including a core made of functionally graded (FG) material and two layers of smart material-piezo-magneto-electric-resting on a Winkler Pasternak elastic foundation are examined. The displacement field for the nanobeam is chosen via Timoshenko beam theory. Also, the size dependency is taken into account by using nonlocal strain gradient theory, aka NSGT. Then, by employing Hamilton's principle, energy procedure, the governing equations together with the boundary conditions are achieved. The solution procedure is a numerical solution called generalized differential quadrature method, or GDQM. The accuracy and reliability of the formulation alongside solution method is examined by using other published articles. Lastly, the parameter which can alter and affect the buckling or vocational behavior of the curved nanobeam is investigated in details.

• 대한토목학회논문집
• /
• 제36권6호
• /
• pp.979-990
• /
• 2016

본 연구는 변형률 기반 설계를 위해 개발된 X80 라인파이프의 인장 변형성능을 검증하기 위해 금속의 비선형 거동을 해석할 수 있는 대표적 경험적인 모델인 GTN (Gurson-Tvergaard-Needleman) 모델을 이용한 비선형 유한요소 해석기법을 제시한다. GTN 모델은 재하과정중 금속 내부에서 발생하는 공극의 생성, 성장, 합체에 대한 모델링을 통해 재료의 손상거동을 묘사하는데, 본 연구에서는 GTN 모델에 대한 사용자 정의 재료모델을 작성하고 상용 유한요소해석 프로그램인 ABAQUS에 연동시켜 강재의 비선형 손상거동을 해석하였다. 비선형 손상해석을 위한 모재와 용접용 재료의 재료상수는 원형봉과 전두께 시편에 대한 인장시험 결과를 수치모사하여 결정하였으며, 결정된 재료상수를 이용하여 SENT (Single Edge Notch Tension) 시험과 CWPT (Curved Wide Plate Test)를 수치모사하였다. 수치해석 결과로부터 인장 변형성능을 산정하고 이를 시험결과 및 기존의 경험공식과 비교한 결과 본 연구에서 개발한 수치기법이 X80 라인파이프 부재의 인장 변형성능을 신뢰도 높게 평가하는 것을 확인하였으며, 결과적으로 변형률 기반 설계에 효과적으로 활용될 수 있을 것으로 기대된다.

• 대한산업공학회지
• /
• 제21권3호
• /
• pp.387-396
• /
• 1995

For situations where there are several markets with different profit/cost structures, an economic two-sided screening procedure using a correlated variable is developed. It is assumed that the performance variable and the screening variable are jointly normally distributed. A profit model is constructed which involves selling price, cost incurred by imperfect quality, and screening inspection cost. Methods of finding the optimal screening procedure are presented and numerical examples are given.