• Speech Sciences
• /
• v.8 no.4
• /
• pp.17-33
• /
• 2001

In this paper, we implement the large variable vocabulary speech recognition system, which is characterized by no additional pre-training process and no limitation of recognized word list. We have designed the system in order to achieve the high recognition rate using the decision tree based state tying algorithm and in order to reduce the processing time using the gaussian selection based variable flooring algorithm, the limitation algorithm of the number of nodes and ENNS algorithm. The gaussian selection based variable flooring algorithm shows that it can reduce the total processing time by more than half of the recognition time, but it brings about the reduction of recognition rate. In other words, there is a trade off between the recognition rate and the processing time. The limitation algorithm of the number of nodes shows the best performance when the number of gaussian mixtures is a three. Both of the off-line and on-line experiments show the same performance. In our experiments, there are some differences of the recognition rate and the average recognition time according to the distinction of genders, speakers, and the number of vocabulary.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.5
• /
• pp.17-23
• /
• 2004

In this paper, we proposed a mixed algerian to improve decimal division speed. In the binary number system, nonrestoring algorithm has a smaller number of operation than restoring algorithm. In decimal number system however, the number of operations differs with respect to quotient values. Since one digit ranges 0 to 9 in decimal, the proposed mixed algerian employs both nonrestoring and restoring algorithm considering current partial remainder values. The proposed algorithm chooses either restoring or nonrestoring algerian based on the remainder values. The proposed algorithm improves computation speed substantially over a single algorithm decreasing the number of operations.

• Journal of Trauma and Injury
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2011

Purpose: Recently, social interest in an organized trauma system for the treatment of patients has been increasing in government and academia and the establishment of trauma center is being considered across the country. However, establishing such a system has not been easy in Korea, because enormous experiences and resources are necessary. The objectives of this study were (1) to estimate a trauma patient's demands during the course of treatment and (2) to provide appropriate direction for trauma centers to be established in Korea. Methods: The records of 207 patients who were admitted to the Department of Trauma Surgery in Ajou University Medical Center due to trauma were retrospectively reviewed for a 1 year period from March 2010 to February 2011. Patients were reviewed for general characteristics, number of hospital days, numbers and kinds of surgeries, numbers and kinds of consultations, ISS (Injury Severity Score) and number of patients with ISS more than 15. Results: All 207 patients were enrolled. The average number of hospital days was 36.7 days. The ICU stay was 15.9 days, and the general ward stay was 20.8 days. Admitted patients occupied 9.02 beds in ICU and 11.80 beds in the general ward per day. The average number of surgeries per patient was 1.4, and surgery at the Department of Trauma Surgery was most common. Number of consultations per patient was 14.23, and consultations with orthopedic surgeons were most common. The average ISS was 18.6. The number of patients with ISS more than 15 was 141 (61.8%) and the average number of patients treated per trauma surgeon as a major trauma patient was 94.3. The number of mortalities was 20, and the mortality rate was 9.7%. Conclusion: To reduce mortality and to provide proper treatment of patients with major trauma, hospitals need some number of beds, especially in the ICU, to treat patients and to prepare them for emergent surgery. An appropriate number of trauma surgeons and various specialists for consultation are also needed.

• Ocean and Polar Research
• /
• v.41 no.1
• /
• pp.35-46
• /
• 2019

The purpose of this study is to identify factors influencing fish production of shallow-sea aquaculture in South Korea. This study employed the two-way fixed effect and random effect models based on the panel models and also the difference between GMM and system GMM models based on the dynamic panel models using the amount of fish farming production, the number of stocked fry, the number of cultured fish, the amount of inputted feed, the farming area, the number of workers, and the sales price data from 2010 to 2017. First, the two-way fixed effect model of the panel models was selected by panel characteristics, time characteristics and Hausman tests and also the model was statistically significant. As a result of the two-way fixed effect model, the number of stocked fry, the amount of inputted feed, and the number of workers were identified as factors that increase the fish production of shallow-sea aquaculture. However, the number of cultured fish and the sales price were analyzed as factors that reduce the fish production of shallow-sea aquaculture. Second, the system GMM model of the dynamic panel models was selected by Hansen test and Arellano-Bond test in order to identify whether or not the over-discrimination condition is appropriate. Based on the system GMM model, the number of stocked fry, the amount of inputted feed, the number of workers in this year and 1 year ago, the number of cultured fish 2 years ago, and the sale price 3 years ago were analyzed as factors that increase the fish production of shallow-sea aquaculture. However, the amount of fish farming production 1, 2, 3 years ago, the farming area in this year, and the number of cultured fish in this year and 1 year ago were identified as factors that reduce the fish production of shallow-sea aquaculture. In conclusion, this study suggests that it is desirable to control the amount of stocked fry rather than to expand the farming area for fish farming in shallow-sea aquaculture, so as to keep the sale price at a certain level by maintaining the appropriate amount of fish production.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.6
• /
• pp.1828-1847
• /
• 2014

Coordinated multi-point (CoMP) transmission has been regarded as a potential technology for LTE-Advanced. In frequency division duplexing systems, channel quantization is applied for reporting channel state information (CSI). Considering the dynamic number of cooperation base stations (BSs), asymmetry feature of CoMP channels and high searching complexity, simply increasing the size of the codebook used in traditional multiple antenna systems to quantize the global CSI of CoMP systems directly is infeasible. Per-cell codebook based channel quantization to quantize local CSI for each BS separately is an effective method. In this paper, the theoretical upper bounds of system throughput are derived for two codeword selection schemes, independent codeword selection (ICS) and joint codeword selection (JCS), respectively. The feedback overhead and selection complexity of these two schemes are analyzed. In the simulation, the system throughput of ICS and JCS is compared. Both analysis and simulation results show that JCS has a better tradeoff between system throughput and feedback overhead. The ICS has obvious advantage in complexity, but it needs additional phase information (PI) feedback for obtaining the approximate system throughput with JCS. Under the same number of feedback bits constraint, allocating the number of bits for channel direction information (CDI) and PI quantization can increase the system throughput, but ICS is still inferior to JCS. Based on theoretical analysis and simulation results, some recommendations are given with regard to the application of each scheme respectively.

• Health Policy and Management
• /
• v.8 no.2
• /
• pp.88-109
• /
• 1998

The main purpose of this study is to compare the traditional cost system and ABC(Activity Based Cost) system of clinical laboratory department in a hospital. The study subject was 296 services in clinical laboratory from March, 1997 to August, 1997. In a new costing system, cost for a lab test consist of direct cost element, activity based cost element, and allocated common cost element. In a traditional cost system, cost elements included direct cost element and indirect cost allocated based on test volumes The major findings of this research were as follows. 1. In the application of ABC system, total cost was analyzed as follows. Direct cost was 39.3% of total cost. Activity cost and allocation were 20.9% and 39.8%, respectively. The results of analysis to use traditional cost system were as follows. Direct cost was 39.3% and it was as same as the result of direct cost of ABC system. Indirect cost was 60.7%. 2. Activities of clinical laboratory of subject hospital were registration, pre-test operation, test, test result handling, delivery, culture, post-test operation, technical support, management support, and educational support. 3. The differences of the case of higher number of test case being carried out, the cost of ABC system was lower than the cost of traditional cost system. Otherwise in the case of lower number of test case being carried out, the rests have not been appropriately evaluated, and effective management were needed in clinical laboratory.

• Journal of the Korean Institute of Educational Facilities
• /
• v.9 no.1
• /
• pp.15-26
• /
• 2002

According to seventh curriculum, new types of school design have been developed recently. However there are hardly any data of national status about plan and area organization, types and number of rooms of those. On this background, the purpose of this study is to provide fundamental resources for architectural designing and planning of high schools and to recognize national status of plan organizations of high schools through collecting 53 school's standard design drawings(arrangement, plan drawing) which city, province education office drafted for 4 years(from 1997 to 2000) and analyzing them into plan types, building area and type, number and area of rooms. The results of this study are as follows: 1. The range of class number of designed 53 high schools varies from 24 to 36 and 36-class-schools are 47.2% of all. Average number of class is 34.1. As a result we can find out large scale schools are mainly designed. 2. Among 53 schools, 21 schools have the department system but few of them equipped sufficient rooms and their features are very manifold. After recognizing utilization status of each schools, the standards of room type, number and plan organization should be proposed. In terms of plan type for fluent level based transferring class, most of schools are not apt. 3. In the status of type and number of rooms related to class number, range is very wide. So simplification is necessary. 4. The variations of building area, area per a class and area per a student are very large so that standard of adequate area should be established. 5. That every school which has different plan organization from conventional schools exceeds ministry of education's minimum area standards shows those standards cannot cover the diverse plan design of school. So more adequate standards should be proposed. 6. Area and number of Teacher's research room and Home Base are also very manifold from school to school. They are also considered to be simplified immediately.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.61-69
• /
• 2019

The concept of carsharing involves sharing a small number of reserved cars to be used individually by a larger number of people as required. This study examines the operating parameters of one-way carsharing systems in order to determine the appropriate operating conditions that minimizes the lost sales rate. Five operating parameters are tested in this study: the number of stations, the average number of vehicles per station, the rate of one-way trip, the average number of staffs per station, and the relocation policy. The performance of round-trip carsharing systems is also compared to that of one-way carsharing systems. A simulation model is developed and simulations are performed to determine the appropriate combination of operating parameter and levels. The simulation results show that the average number of vehicles per station is the most critical parameter. Other key findings obtained from this research are as follows. First, applying the appropriate relocation policy to one-way carsharing systems can allow more customers to rent vehicles than the traditional round-trip carsharing systems. Second, the appropriate relocation policy should be selected based on the average number of vehicles per station in order to minimize the lost sales rate. Third, the number of stations does not affect the lost sales rate. This study findings will provide tools to understand impact of the carsharing system parameters on the efficiency of the carsharing operations.

• Wind and Structures
• /
• v.36 no.3
• /
• pp.175-200
• /
• 2023

The large eddy simulation (LES) of the flow around a circular cylinder is not only affected by the sub-grid scale (SGS) model but also by the grid resolution of the computational domain. To study the influence of different grids on the LES results, the LES simulations of the flow around a circular cylinder with different grids at Reynolds number (Re) = 3900 was performed. A circular computational domain with different radial growth rates and circumferential and spanwise grid numbers was adopted for the simulations. Meanwhile, the aerodynamic forces, wind pressure coefficients, mean and instantaneous flow fields, and the effect of grid resolution on them were comprehensively analyzed. The results indicate that the lift coefficient, wind pressure coefficient, and recirculation length are significantly affected by the radial growth rate of the grid and the circumferential grid number. The spanwise grid number has a significant influence on the three-dimensionality of the flow and plays an important role in velocity fluctuations in the wake region. Nevertheless, the aerodynamic coefficients and recirculation length are not sufficiently sensitive to the grid number in the spanwise direction. By comparing the results, it can be concluded that suitable and reliable LES results can be obtained when the radial growth rate is 1.03 or 1.05, the circumferential grid number is 160, 200, or 240, and the spanwise grid number is 64. A radial growth rate 1.05, circumferential grid number 160, and spanwise grid number 64 are recommended to reduce the grid amount and further improve the efficiency.

• 전자공학회논문지 IE
• /
• v.44 no.3
• /
• pp.12-22
• /
• 2007

In this paper, we designed of the high speed digital neuron processor in order to digital neural networks. we designed of the MAC(Multiplier and Accumulator) operation unit used residue number system without carry propagation for the high speed operation. and we implemented sigmoid active function which make it difficult to design neuron processor. The Designed circuits are descripted by VHDL and synthesized by Compass tools. we designed of MAC operation unit and sigmoid processing unit are proved that it could run time 19.6 nsec on the simulation and decreased to hardware size about 50%, each order. Designed digital neuron processor can be implementation in parallel distributed processing system with desired real time processing, In this paper.