• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.384-384
• /
• 2000

In adaptive neuro-control, neural networks are used to approximate the unknown plant nonlinearities. Until now, most of the papers in the field of controller design fur nonlinear system using neural networks considers the affine system with fixed number of neurons. This paper considers nonaffne nonlinear systems and dynamic variation of the number of neurons. Control laws and adaptive laws for weights are established so that the whole system is stable in the sense of Lyapunov.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.791-796
• /
• 1998

Air voids existed in hardened concrete have an important influence on concrete deterioration such as carbonation, freezing and thawing, and corrosion of embedded steel in concrete. Therefore it is very significant to investigate the pore structure of system(size, number and continuity of air voids) to solve the reason caused concrete deterioration. The purpose of this study is to develop the standard method of measuring air voids which affect properties in hardened concrete using image analyzing system. This paper presents the settlement of rapid and exact experimental method which extracts fine bubbles, calculates the number of air voids, and determines air-void distribution using image analyzing system with computer.

• 산업경영시스템학회지
• /
• 제41권1호
• /
• pp.102-109
• /
• 2018

This paper seeks to present a multi-control method that can contribute to effective control of the production line with multiple bottleneck processes. The multi-control method is the production system that complements shortcomings of CONWIP and DBR, and it is designed to determine the raw material input according to the WIP level of two bottleneck processes and WIP level of total process. The effectiveness of the production system developed by applying the multi-control method was verified by the following three procedures. Raw material input conditions of the multi-control method are as follows. First, raw materials are go into the production line when the number of the total process WIP is lower than established number of WIP in total process and first process is idle. Second, raw materials are introduced when the number of WIP of two bottleneck processes is lower than the established number of WIP of each bottleneck process. Third, raw materials are introduced when the first process and in front of bottleneck process are idle even if the number of WIP in the total process is less than established number of WIP of the total process. The production line with two bottleneck processes was selected as the condition for production environment, and the production process modeling of CONWIP, DBR and multi-control production method was defined according to the production condition. And the optimum limited WIP level suitable for each system was obtained by applying a genetic algorithm to determine the total limited number of WIP of CONWIP, the limited number of WIP of DBR bottleneck process, the number of WIP in the total process of multi-control method and the limited number of WIP of bottleneck process. The limited number of WIP of CONWIP, DBR and multi-control method obtained by the genetic algorithm were applied to ARENA modeling, which is simulation software, and a simulation was conducted to derive result values on the basis of three criteria such as production volume, lead time and number of goods in-progress.

• 보건행정학회지
• /
• 제28권2호
• /
• pp.138-144
• /
• 2018

Background: Diagnostic imaging fee had been reduced in May 2011, but it was recovered after 6 months because of strong opposition of medical providers. This study aimed to analyze the behavior of medical providers according to fee changes. Methods: The National Health Insurance claims data between November 2010 and December 2012 were used. The number of exams per computed tomography was analyzed to verify that the fee changes increased or decreased the number of exams. Multivariate regression model were applied. Results: The monthly number of exams increased by 92.5% after fee reduction, so the diagnostic imaging spending were remained before it. But medical provider decreased the number of exams after fee return. After adjusting characteristic of hospitals, fee reduction increased the monthly number of exams by 48.0% in a regression model. Regardless type of hospitals and severity of disease, the monthly number of exams increased during period of fee reduction. The number of exams in large-scaled hospitals (tertiary and general hospital) were increased more than those of small-scaled hospitals. Conclusion: Fee-reduction increased unnecessary diagnostic exams under the fee-for-service system. It is needed to define appropriate exam and change reimbursement system on the basis of guideline.

• 동력기계공학회지
• /
• 제19권4호
• /
• pp.36-42
• /
• 2015

TMixed convective flow in a bottom heated and top cooled rectangular channel can be significantly affected by the channel aspect ratio, Prandtl number, Reynolds number, Rayleigh number and angle of inclination. In such a mixed convection, the flow pattern plays an important role in various technological processes. In this study, a numerical investigation is carried out to explore mixed convection in a three-dimensional rectangular channel with bottom heated and top cooled uniformly. The three-dimensional governing equations are discretized using the finite volume method. In the range of low Reynolds number($0{\leq}Re{\leq}9.6{\times}10^{-2}$), the effects of the aspect ratio($2{\leq}AR{\leq}12$) and Gr/Re are presented and discussed. The longitudinal roll number in the channel is increased with increasing aspect ratio, and the roll number induced, regardless of the aspect ratio number, is even in the range of aspect ratios between 2 and 12, New vortex flow structure containing inclined longitudinal rolls is found, which is affected by aspect ratio and Reynolds number. The ratio Gr/Re is used to check the relative magnitudes of forced and natural convection in the mixed convective flow of high viscous fluid.

• 한국정보통신학회논문지
• /
• 제16권12호
• /
• pp.2643-2648
• /
• 2012

RFID 시스템에서 리더가 태그를 인식할 때 충돌 방지 기법은 시스템의 성능에 중요한 요인으로 작용한다. 확률론적 기반의 충돌 방지 기법은 슬롯상태를 이용하여 태그 수를 추정하는 기법이다. 태그 수를 더욱 정확하고 빠르게 추정하기 위하여 충돌 방지 기법들이 많이 연구되어 있으나 태그 수를 알 수 없는 환경에서 초기 태그 수에 대한 예측은 고려하지 않고 있다. 본 논문에서는 초기 태그 수를 예측하기 위한 방안을 제안하고 초기 태그 수가 시스템 성능에 미치는 영향과 제안된 기법의 성능을 분석한다.

• 한국정보통신학회논문지
• /
• 제7권1호
• /
• pp.9-18
• /
• 2003

본 논문에서는 나카가미 페이딩 채널에서 Type- I Hybrid ARQ 기법과 결합될 수 있는 패킷결합 기법을 DS/CDMA 시스템에 적용하여 AWGN 채널과 레이크 수신기를 사용한 나카가미 페이딩 채널하에서 시스템의 전송율을 분석하였다. 분석을 위한 파라메터로서 패킷결합수(L), 다이버시티 브렌치수$({L_c})$, 페이딩지수 m, 사용자수(K) 및 패킷의 길이(N)를 사용하였으며, 에러검출을 위해 CRC-12 부호와 에러정정을 위해 (2,1,3) 길쌈부호를 사용하였다. 분석결과 AWGN 채널에서 보다 나카가미 페이딩 채널하에서 레이크 수신기를 사용하였을 때 시스템의 전송율이 우수함을 확인하였고, 패킷결합수( L)가 증가할 때 채널의 상태가 저하됨에 따라 시스템의 전송율은 급격히 감소하지만 결합기법을 통해 낮은 ${E_b}/{N_o}$에서도 시스템의 전송율은 일정하게 유지됨을 확인하였다. 또한 페이딩 지수(m)와 다이버시티 브렌치수$({L_c})$가 증가하면 시스템의 전송율은 증가하지만, 사용자수(K)와 패킷의 길이(N)이 증가하면 시스템의 전송율은 감소함을 확인하였다.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.6-15
• /
• 2020

This study examined the structural behaviors and ultimate loads of assembled system scaffolds by load tests. Considering the number of bay and bracing installation, four specimens were tested. The bays were divided into 1 bay and 2 bays, with and without the bracing member installed. Failure modes and horizontal displacements show that the whole column buckled without showing no point of inflection in the column, regardless of whether or not braces were installed. Thus, the current design method of selecting the vertical spacing between the horizontal members of the system scaffold as the effective buckling length underestimates the effective buckling length. In case of 1 bay specimens, the ultimate loads between specimens with and with bracing members are similar. However, in case of 2 bay specimens, the specimen with bracing members shows the increased ultimate load of 36% compared with that without bracing members. In addition, as the number of bays in the system scaffold increases, the ultimate load of the unit vertical column increases in case of the specimen with bracing installation. However, in the specimen without bracing members, the ultimate load of the unit column reduces with the increment of the number of bays due to the torsional buckling. Therefore, it is essential to install bracing members to increase the whole strength of system scaffolds and the ultimate load of the unit column.

• Journal of Computing Science and Engineering
• /
• 제4권2호
• /
• pp.173-187
• /
• 2010

Recent technological advances in mobile communication systems have made explosive growth in the number of mobile device users worldwide. One of the most important issues in designing a mobile computing system is location management of users. The hierarchical systems had been proposed to solve the scalability problem in location management. The scalability problem occurs when there are too many users for a mobile system to handle, as the system is likely to react slow or even get down due to late updates of the location databases. In this paper, we propose a top-down clustering algorithm for hierarchical location database systems in a wireless network. A hierarchical location database system employs a tree structure. The proposed algorithm uses a top-down approach and utilizes the number of visits to each cell made by the users along with the movement information between a pair of adjacent cells. We then present a modified algorithm by incorporating the exhaustive method when there remain a few levels of the tree to be processed. We also propose a capacity constraint top-down clustering algorithm for more realistic environments where a database has a capacity limit. By the capacity of a database we mean the maximum number of mobile device users in the cells that can be handled by the database. This algorithm reduces a number of databases used for the system and improves the update performance. The experimental results show that the proposed, top-down, modified top-down, and capacity constraint top-down clustering algorithms reduce the update cost by 17.0%, 18.0%, 24.1%, the update time by about 43.0%, 39.0%, 42.3%, respectively. The capacity constraint algorithm reduces the average number of databases used for the system by 23.9% over other algorithms.

• 한국전자거래학회지
• /
• 제19권4호
• /
• pp.151-168
• /
• 2014

국내에서는 한국저작권위원회 주관으로 디지털콘텐츠 식별을 위한 국가디지털콘텐츠식별 체계인 UCI(Universal Content Identifier)와 통합저작권관리를 위한 ICN(Integrated Copyright Number) 식별체계를 운영하고 있다. 그러나 UCI나 ICN은 국제표준 식별체계인 ISRC (International Standard Recording Code)나 ISWC(International Standard Works Code), ISAN (International Standard Audiovisual Number) 등과 같은 국제적인 표준 식별체계와의 연계가 되어있지 않다. 따라서 국내 콘텐츠의 해외시장 진출을 위해서는 해당되는 국제표준의 식별체계 와 연계를 위한 추가의 별도 작업이 요구되고 있으며, 외국에서 판매되는 콘텐츠에 대한 정산을 포함한 통계자료는 국내시스템으로는 통합관리가 불가능하다. 본 논문에서는 UCI/ICN과 국제 표준의 식별체계와의 연계를 위해 국내/외 식별체계 동향을 조사하고, 조사한 국제표준 식별체계 들의 메타데이터와 표준을 분석하여 UCI/ICN과의 연계 방안을 제시한다. 또한 시험 모형을 개발 해봄으로써, UCI/ICN과 국제표준 식별체계와의 연계방법에 관한 연구 방향을 제시하였다.