• Fibers and Polymers
• /
• 제6권1호
• /
• pp.82-88
• /
• 2005

We have investigated the luster of modified cross-sectional fiber fabrics as one of the essential quality estimates for clothing development. We have confirmed an objective evaluation method, and have determined the experimental luster char­acteristics of modified cross-section fibers. The cross-section of the fibers in a fabric affects the appearance of a textile. We used the image analysis method to investigate the luster to determine the critical factors influencing the appearance of modi­fied cross-section fiber fabrics. For similarly structured textiles in a component fabric, clear differences were observed in the fabric weave, density, percentage, and total area of blobs, which is image region. Color played a decisive role in the luster of the textiles, and luster was not significantly influenced by the modified cross-section fabric weave. In addition, the degree of luster did not increase in the order plain to twill to satin for modified cross-sectional fiber fabrics. All the split-type microfi­bers exhibited higher numerical luster values (percentage of pixels, and number and total area of blobs) than sea-island microfibers did. The degree of luster of the modified cross-sectional fiber fabrics was not high at specular reflection angles.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1453-1461
• /
• 2015

In this article the non-linear behavior of the shear wall with low yield stress retrofitted with Glass Fiber Reinforced Polymer (GFRP) is investigated under pushover loading. The models used in this study are in ${\frac{1}{2}}$ scale of one story frame and simple steel plates with low yield stress filled the frame span. The models used were simulated and analyzed using finite elements method based on experimental data. After verification of the experimental model, various parameters of the model including the number of GFRP layers, fibers positioning in one or two sides of the wall, GFRP angles in respect to the wall and thickness of the steel plate were studied. The results have shown that adding the GFRP layers, the ultimate shear capacity is increased and the amount of energy absorbed is decreased. Besides, the results showed that using these fibers in low-thickness plates is effective and if the positioning angle of the fibers on the wall is diagonal, its behavior will improve.

• Carbon letters
• /
• 제11권3호
• /
• pp.176-183
• /
• 2010

PAN precursor fibers were produced via wet-spinning process, and effects of polymerization and spinning processes, especially the stretching process, were investigated on mechanical properties and micro-morphologies of precursor fibers. An increase in molecular weight, dope solid and densification and a decrease in surface defects were possible by controlling polymerization temperature, the number of heating rollers for densification and the jet stretch ratio, which improved the mechanical properties of precursor fibers. The curves for strength, modulus, tensile power and diameter as a function of stretch ratio can be divided into three stages: steady change area, little change area and sudden change area. With the increase of stretch ratio, the fiber diameter became smaller, the degree of crystallization increased and the structure of precursor fibers became compact and homogeneous, which resulted in the increase of strength, modulus and tensile power of precursor fibers. Empirical relationship between fiber strength and stretch ratio was studied by using the sub-cluster statistical theory. It was successfully predicted when the strengths were 0.8 GPa and 1.0 GPa under a certain technical condition, the corresponding stretch ratio of the fiber were 11.16 and 12.83 respectively.

• 한국잠사곤충학회지
• /
• 제34권1호
• /
• pp.49-56
• /
• 1992

반응개시제로 potassium persulfate를 사용하여 견섬유에 MAA를 처리하였을 때의 반응 mechanism을 구명하기 위하여, 열분석과 일련의 기구분석을 행하였으며, 이 중 열분석에 의해 얻어진 결과는 다음과 같다. Differential scanning calorimeter 관찰로부터는 metharcrylamide에 의한 가공견섬유는 견 fibroin과 methacrylamide polymer의 열분석에 의한 peak가 뚜렷하게 분리되어 나타났으며, 가공율이 증가함에 따라 두 peak가 모두 고온측으로 이동하는 것으로 나타났다. 가공견섬유의 흡습율은 가공율이 증가함에 따라 증가하였다.

• 한국주조공학회지
• /
• 제26권5호
• /
• pp.222-226
• /
• 2006

Steel making slag has gained a considerable attraction as one candidate of eco-materials in research fields for recycling resources. Thus, many researches have been performed but were limited to development of substitute for cement being used in the construction field. A little research work also has been done on development of higher value-added materials, including heat resistant and sound absorbing materials. For this reason, the present study were focused on macrostructure characterization of fabricated slag fibers which are applicable to heat resistant materials. The slag fibers were fabricated through a modified melt extraction method. The processing variables employed were the wheel speed and molten slag temperature. The synthesized fibers were characterized by optical microscope and scanning electron microscopy. It was found that the wheel speed of 1400 rpm generated better quality of mineral fibers in terms of the relative amount of shot, diameter and length. This was attributed to the relative extent of contact width between the flowing melt and the rotating wheel. The thickness of the slag fibers also were decreased with increasing the slag melt temperature due mainly to significant decrease in the viscosity of the slag melt. In addition, the lower melt temperature caused an increase in number of shots plus the mineral fibers.

• Structural Engineering and Mechanics
• /
• 제81권3호
• /
• pp.281-292
• /
• 2022

This study aimed to analyze the dynamic punching shear performance of slab-column joints under cyclic loads with the use of double-hooked end (5D) steel fibers. Structural systems such as slab-column joints are widely found in infrastructures. The susceptibility to collapse of such structures when submitted to seismic loads is highly dependent on the structural performance of the slab-column connections. For this reason, the punching capacity of reinforced concrete (RC) structures has been the subject of a great number of studies. Steel fibers are used to achieve a certain degree of ductility under seismic loads. In this context, 5D steel hooked fibers provide high levels of fiber anchoring, tensile strength and ductility. However, only limited research has been carried out on the performance under cyclic loads of concrete structural members containing steel fibers. This study covers this gap with experimental testing of five different full-scale subassemblies of RC slab-column joints: one without punching reinforcement, one with conventional punching reinforcement and three with 5D steel fibers. The subassemblies were tested under cyclic loading, which consisted of applying increasing lateral displacement cycles, such as in seismic situations, with a constant axial load on the column. This set of cycles was repeated for increasing axial loads on the column until failure. The results showed that 5D steel fiber subassemblies: i) had a greater capacity to dissipate energy, ii) improved punching shear strength and stiffness degradation under cyclic loads; and iii) increased cyclic loading capacity.

• 한국염색가공학회지
• /
• 제28권3호
• /
• pp.125-133
• /
• 2016

In this study, efforts were made to enhance the mechanical properties of the poly(vinyl alcohol) (PVA) fibers of medium molecular weight(number-average degree of polymerization=1735) varying the ratio in $DMSO/H_2O$ mixed solvent and spinning/drawing conditions. The gel fibers prepared from pure DMSO were opaquely frozen in the coagulating bath of $-20^{\circ}C$. However, transparent gel fibers were formed without freezing for the mixture to contain water less than 80wt%. As the amount of water in the mixture increased the residual solvent in the coagulated gel fibers decreased ranging from 85 to 42wt%. The complex viscosity increased with increasing PVA concentration in 80/20 $DMSO/H_2O$ exhibiting remarkable shear thinning at 18wt%. In the Cole-Cole plot, the 18wt% PVA solutions gave a deviated curve from 12 and 15wt% ones. Thus the optimum PVA concentration for the spinning processing of medium MW PVA solutions in 80/20 $DMSO/H_2O$ was determined to 18wt% with rheological concept. Low degree of drawing during hot drawing process in the dry state was available for high bath draft in the coagulation bath. The most improved mechanical properties were observed by applying the highest possible draw ratio attained by reducing bath draft over multi-step drawing process. In the given bath draft, linear relationship was observed between both tensile strength and modulus and draw ratio showing the inflection points at the draw ratio of 19.5 and 18.0 for tensile strength and modulus, respectively.

• Journal of Acupuncture Research
• /
• 제18권1호
• /
• pp.170-185
• /
• 2001

Objective : This experimental study was designed to investigate the effect of Chaenomelis fructus herbal acupuncture on the soleus muscle and tibialis anterior muscle of hindlimb-suspended rats. The measurement have been performed on the composition of type I, type IIa and type IIb muscle fibers in the soleus muscle and tibialis anterior muscie - histochemical study. Materials and Methods : Sprague-Dawley rats weighing about 250g were subjected to hindlimb suspension and divided into six groups; 1. Normal group: normai group 2. Control group: group of hindlimb suspension for 7 days 3. NT group: non-treatment group for 2 or 4 weeks after 7days of hindlimb suspension. 4. EX gtoup: running exercise group for 2 or 4 weeks after 7days of hindlimb suspension. 5. HA group: administration of Chaenomelis fructus herbal acupuncture during 2 or 4 weeks after 7 days of hindlimb suspension. 6. EXHA group: administration of Chaenomelis fructus herbal acupuncture and running exercise during 2 or 4 weeks after 7 days of hindlimb suspension. Results Results : 1. The composition of type I muscle fibers in the soleus muscle significantly increased in 2 or 4 weeks HA and EXHA groups more than control group, and the composition of type IIa muscle fibers in the soleus muscle significantly decreased in 2 or 4 weeks HA and EXHA goups more than control group. 2. The composition of type I muscie fibers in the tibialis anterior muscle significantly increased in 2 or 4 weeks HA and EXHA groups more than control group, and the composition of type IIb muscle fibers in the soleus muscle significantly decreased in 2 or 4 weeks HA and EXHA groups more than control group. 3. The size of type I muscle fibers in the soleus muscle significantly increased in 2 or 4 weeks HA and EXHA groups more than control group, and the size of type IIa muscle fibers in the soleus muscle significantly increased in 2 weeks EXHA group and 4 weeks HA and EXHA groups more than control group. 4. The size of type I, IIa muscle fibers in the tibialis anterior muscle significantly increased in 2 or 4weeks HA, EXHA and EX groups more than control group, and the size of type IIb muscle fibers significantly increased in 2 weeks EXHA group and 4 weeks HA, EXHA and EX groups more than control group. 5. The capiliaries number per fiber of muscle fibers in the soleus and tibialis anterior muscle showed no differences in all experimental groups more than control group. Conclusion : According to the above results, it is shown that Chaenomelis fructus herbal acupuncture could be effective in the treatment of muscle atrophy.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.209-222
• /
• 1997

Authors surveyed the ground water near the waste disposed from a fiberglass production factory to confirm the presence of glassfiber in the water and to determine the effect of sampling conditions and storage on the recovery of fibrous materials in the ground water. Sample was collected at every 4 hours for 48 hours consecutively. After finishing the 48 hours sample, water sampling was done from each tap after repeated turning on and off the water for 30 seconds at each time. Sample was collected in the two 1.5 liter polyethylene bottle after vigorously shaking the bottle with the same water several times with the flowing tap water. At each paired sample, one bottle was stored stand still at room temperature, and the other sample was filtered immediately after sampling. Water was filtered on the Mixed Cellulose Ester filter with negative pressure. Each sample was divided into upper and lower layer. The other bottle was stored at room temperature standstill for 7 days and filtered in the same fashion as the other pair of sample did. Each MCE filter was divided into 4 pieces and one piece was treated with acetone to make it transparent. Each prepared sample was observed by two researchers under the light and polarizing microscopy, scanning electron microscopy and energy dispersive X-ra microanalysis. Fibers were classified by the morphology and polarizing pattern under the polarizing microscope, and count was done. 1. There was a significant fluctuation in number of the fibers, but there was no specific demonstrable pattern. 2. Non-polarizing fibers frequently disappeared after 7 days's storage. But cluster of fibers were found at the wall of the same container by scratching technique. 3. Polarizing fibers were usually found in between the filter and the manicure pasted area. Possible explanations for this phenomenon will be that either these fibers are very light or have electronic polarity. Hence, these fibers are not able to be attached on the surface of slide glass. 4. Under the scanning electron microscopic examination, the fibers which are not refractive under the light microscopy were identified as glassfiber. Other fibers which is refractive under the polarizing microscopy were identified as magnesium silicate fibers. It is strongly suggested that development of standardized method of sample collection and measurement of fibrous material in the water is needed.

• 한국의류학회지
• /
• 제20권1호
• /
• pp.157-169
• /
• 1996

Polyester yarns and fabrics containing three levels of $TiO_2$ delusterant were hydrolyzed with NaOH and examined for physical and morphological changes. The mechanical propertis and hand values of alkaline hydrolyzed polyester fabrics were measured using KES-FB system. Also, the relationship between the morphology and the mechanical property of alkaline hydrolyzed polyester fabrics was analyzed. The results are as follows: 1. At an initial stage of alkaline treatment, the concentration of $TiO_2$ did not affect the weight loss of the treated yarns. But by increasing treatment time, the effect of the concentration of $TiO_2$ on the weight loss of the fiber became more pronounced. The weight loss were increased in the following order; fulldull> semidull> clear 2. The effect of hydrolysis on yarn tensile strength seems to be more related to the size of the pits on the fibers rather than the number of pits. 3. Axially oriented pits occurred along the hydroyzed, delustered fiber surfaces, while such pitting was absent on hydrolyzed fiber containing no $TiO_2$. The number of voids across the surface of a fiber increased with an increase in the amount of TiOa incorporated into the fibers. The size of the voids depended on the treatment time of hydrolysis rather than the concentration of TiOa. 4. The mechanical properties and hand values of polyester fabrics were changed by alkaline treatment but were identical regardless of the concentration of TiOa. While the mechanical properties of polyester fabrics depended on the structural change of the fibers and the yarns within the fabrics as the fiber diameter became progressively smaller rather than the size and number of pits.