• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.319-322
• /
• 2005

Experimental results on splice strength of concrete and hybrid fiber reinforced cementitious composite are reported. Two series of tests, with six specimens each, were carried out. The research parameters were: bar diameter(D16, D22), lap splice length(50, 75, 100$\%$). The current experimental results demonstrated clearly that the use of hybrid fibers in cementitious matrixes increases significantly the splice strength of reinforcing bars in tension. Also, the presence of fibers increased the number of cracks formed around the spliced bars, delayed the growth of the splitting cracks, and consequently, improved the ductility of bond failure.

• The Journal of the Korean dental association
• /
• v.9 no.10
• /
• pp.611-615
• /
• 1971

The articular discs from temporomandibular joints of thirty men and women whose ages ranged between 20 and 70 years hve been used in this study. The articular discs of the temporomandibular joints of human postmortem material was examined individually by means of microscopic techniques. The following changes were seen: 1. With advancing age some of fibroblast was developed into chondroid cells. Which later may differentiate into true chondrocytes. 2. In young individuals the elastic fibers found only I relatively small numbers. With advancing age elastic fibers was increased in number. 3. With advancing age the arrangement of fibrous tissue are irregular and loosely separated. 4. In the discs, as well as in the fibrous tissue covering the articular surfaces, this cellular changes seems to be dependent upon mechanical influences.

• Smart Structures and Systems
• /
• v.7 no.1
• /
• pp.27-40
• /
• 2011

Geopolymer concrete is finding a growing number of niche applications in the field of civil engineering due to its high compressive strength and strength gain rate, retainage of structural properties in elevated temperature environments, chemical stability in highly acidic conditions and environmental benefits. Combining the above mentioned characteristics with induced electrical conductivity, could enable geopolymer cement to serve as a smart and sustainable cementitious material suitable for health monitoring of civil structures. Carbon fibers were added to fresh geopolymer and OPC (ordinary Portland cement) mixes to enhance their electrical conductivities. AC-impedance spectroscopy analysis was performed on the specimens with fiber fraction ranging from 0.008 to 0.8 with respect to the weight of cementitious binder, to measure their electrical resistivity values and to determine the maximum beneficial fiber content required to attain electrical percolation. Experimental observations suggest that CFR-geopolymer cement exhibits superior performance to CFR-OPC in terms of conducting electrical current.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.181-184
• /
• 2005

Experimental results on lap splice performance of high performance fiber reinforced cementitious composite(HPFRCC) with fiber types under repeated loading are reported. Fiber types were polypropylene(PP), polyethylene(PE) and hybrid fiber[polyethylene fiber+steel cord(PE+SC)]. The development length($l_d$) was calculated according to the relevant ACI code requirements for reinforcing bars in concrete. The current experimental results demonstrated clearly that the use of fibers in cementitious matrixes increases significantly the splice strength of reinforcing bars in tension. Also, the presence of fibers increased the number of cracks formed around the spliced bars.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.3 s.58
• /
• pp.555-566
• /
• 1997

This study was carried out to evaluate the cytotoxicity of rock wool fibers(RWFs) such as cell division disturbance, chromosomal and DNA damage, and mutagenicity using cultured cells. RWFs were the man made mineral fibers. In order to find the correlation between the cytotoxicity of RWFs and the phagocytic capacity of cells, the phagocytic processes were observed using scanning electron microscope. Cell division disturbance by RWFs was evaluated by the formation of multinucleated giant cells. The chromosomal damage was evaluated by the micronucleus formation. For the evaluation of oxidative DNA damage, 8-hydroxy-2'-deoxyguanosine (8-OH-dG) formation was measured utilizing calf thymus DNA. Mutagenicity was determined by the point mutation of HGPRT and the effect of RWFs on cell transformation was also observed. 1. Compared with the results of chrysotile, RWFs were no or little effect on the cell growth according to the results done by the tests of cell proliferation inhibition and relative plating efficiency. 2. The frequency of multinucleated giant cell formation was increased by the treatment of RWFs and it was dose-dependent. However, the effect of RWFs was weaker than that of chrysotile. 3. The number of micronuclei formed in the RWFs treated cells was between those of cells treated with chrysotile and those of untreated cells. 4. The 2 fold increase in the formation of 8-OH-dG in calf thymus DNA was observed in the cells treated with RWFs in the presence of $H_2O_2$. On the other hand, chrysotile had no effect on the 8-OH-dG formation. 5. RWFs had no effect on the HGPRT point mutation and cell transformation. These results showed that RWFs could induce chromosomal damage, cell division disturbance and oxidative DNA damage in the RWFs treated cells.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.327-333
• /
• 2015

This paper reports the fabrication of various micro-lensed single-mode optical fibers through the use of an enhanced peak power $CO_2$ laser beam. The end faces of the optical fibers are exposed to the $CO_2$ laser beam to form convex, concave, and conical shape optical fiber tips. Peak power of the $CO_2$ laser beam was varied from 0.8 W to 1.5 W depending on the shape of the optical fiber tip. We also discover the dependence of the angle of the optical fiber tip on the rotation angle and the number of $CO_2$ laser irradiations. The angle shows an increasing trend with both these parameters. We achieve a wide range of lenticular fibers with end face angle varying from $4.47^{\circ}$ to $8.13^{\circ}$. Furthermore, we investigate the emission pattern of light from the developed micro-lensed fibers. The proposed $CO_2$ laser based optical fiber reshaping technique shows great consistency, and thus is suitable for commercial applications.

• Coupled systems mechanics
• /
• v.7 no.2
• /
• pp.197-209
• /
• 2018

Fiber-reinforced concrete (FRC) is a material with increasing application in civil engineering. Here it is assumed that the material consists of a great number of rather small fibers embedded into the concrete matrix. It would be advantageous to predict the mechanical properties of FRC using nondestructive testing; unfortunately, many testing methods for concrete are not applicable to FRC. In addition, design methods for FRC are either inaccurate or complicated. In three-point bending tests of FRC prisms, it has been observed that fiber reinforcement does not break but simply pulls out during specimen failure. Following that observation, this work is based on an assumption that the main components of a simple and rather accurate FRC model are mechanical properties of the concrete matrix and fiber pullout force. Properties of the concrete matrix could be determined from measurements on samples taken during concrete production, and fiber pullout force could be measured on samples with individual fibers embedded into concrete. However, there is no clear relationship between measurements on individual samples of concrete matrix with a single fiber and properties of the produced FRC. This work presents an inverse model for FRC that establishes a relation between parameters measured on individual material samples and properties of a structure made of the composite material. However, a deterministic relationship is clearly not possible since only a single beam specimen of 60 cm could easily contain over 100000 fibers. Our inverse model assumes that the probability density function of individual fiber properties is known, and that the global sample load-displacement curve is obtained from the experiment. Thus, each fiber is stochastically characterized and accordingly parameterized. A relationship between fiber parameters and global load-displacement response, the so-called forward model, is established. From the forward model, based on Levenberg-Marquardt procedure, the inverse model is formulated and successfully applied.

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.1-12
• /
• 1999

Of the vast number of plant taxa in the world, the wood is one of the most useful resources. It is important to identify the fibers of wood and pulp for the plant taxonomy and for the uses, but we do not have enough information on them, on them, especially for the computerizd data. The fiber identification is one of the difficult tasks. In addition to the plant taxonomy and the fiber-using industries, such identification is also important in many other fields, including education. document examiners, etc. For these purpose, the fibers should be exactly distinguished. The TISS system I have programed to identify various woods would also be useful in the identification of fibers by the genus and species in the features of unknown samples and in searching the features of a species based on its scientific name. Such searching programs are being developed in many other countries with a view to searching for the species name by using the features of the cells of the woody materials. With the survey of all the available literature, the features of the fibers of 124 species both of softwood and hardwood were examined under the electron and optical microscopies. Each species were coded and carded by the feature, and the databases were built. The microscopic were inputted into a personal computer program called and by a slide film scanner. The new computer program called TISS 2 was developed using C computer language. Korean language fonts were added to the TISS 2. The TISS 2 can be in adding and searching a image of fiber features both of a known fiber and an unknown fiber. The databases were corded for the DELTA system with was developed by Dallwitz and Paine in Australia, 1986.

• Journal of Fashion Business
• /
• v.26 no.3
• /
• pp.87-97
• /
• 2022

This study investigated the dyeability and color change of the natural dyes of SeaCell, a biodegradable functional fiber that is permanently added to cellulose fibers with natural additives extracted from seaweeds. The natural dyes used in the study are five dyes. Gardenia and turmeric, which are yellow-based natural dyes, Sappan wood and Lac, which are red-based natural dyes, and Indigo, a blue-based natural dye, were selected. The dyeability and color change according to the change of the mordant conditions and the number of times of dyeing were investigated. In addition, the dyeing properties and colors of cotton and silk fibers were compared under the same dyeing conditions as SeaCell. The study results are as follows. It was found that SeaCell had lower dyeing properties than silk, a protein fiber, in gardenia, sappan wood, and lac dyes, but had higher dyeing properties than cotton with the same cellulose component as SeaCell fibers. In the case of turmeric, it showed higher dyeing properties than cotton except for the no mordant condition. In the case of Indigo dye, SeaCell shows the best dyeability, indicating that it is a very suitable fiber for Indigo dyeing. As sustainable functional fibers are continuously developed in the future, natural dyes that are environmentally friendly and human-friendly are actively introduced and commercialized, and it is expected that they can be used as reference materials.

• Journal of Adhesion and Interface
• /
• v.3 no.4
• /
• pp.44-52
• /
• 2002

Composite materials are created by combining two or more component to achieve desired properties which could not be obtained with the separate components. The use of reinforcing fillers, which can reduce material costs and improve certain properties, is increasing in thermoplastic polymer composites. Currently, various inorganic fillers such as talc, mica, clay, glass fiber and calcium carbonate are being incorporated into thermoplastic composites. Nevertheless, lignocellulose fibers have drawn attention due to their abundant availability, low cost and renewable nature. In recent, interest has grown in composites made from lignocellulose fiber in thermoplastic polymer matrices, particularly for low cost/high volume applications. In addition to high specific properties, lignocellulose fibers offer a number of benefits for lignocellulose fiber/thermoplastic polymer composites. These include low hardness, which minimize abrasion of the equipment during processing, relatively low density, biodegradability, and low cost on a unit-volume basis. In spite of the advantage mentioned above, the use of lignocellulose fibers in thermoplastic polymer composites has been plagued by difficulties in obtaining good dispersion and strong interfacial adhesion because lignocellulose fiber is hydrophilic and thermoplastic polymer is hydrophobic. The application of lignocellulose fibers as reinforcements in composite materials requires, just as for glass-fiber reinforced composites, a strong adhesion between the fiber and the matrix regardless of whether a traditional polymer matrix, a biodegradable polymer matrix or cement is used. Further this article gives a survey about physical and chemical treatment methods which improve the fiber matrix adhesion, their results and effects on the physical properties of composites. Coupling agents in lignocellulose fiber and polymer composites play a very important role in improving the compatibility and adhesion between polar lignocellulose fiber and non-polar polymeric matrices. In this article, we also review various kinds of coupling agent and interfacial mechanism or phenomena between lignocellulose fiber and thermoplastic polymer.