• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.345-345
• /
• 2004

The spent fuel transportation casks have used as one of the most essential component in the nuclear industry. And, the number of the cask has been significantly increased in recent years. While the bulk amount of spent fuel in the world is still kept in the storage pool, the number of countries which have chosen the advantages of dual purpose cask for transportation and storage is rapidly increasing. The technical experience in the area of spent fuel transportation cask operation and maintenance for long period is also available and will be well utilized also in storage casks. The increasing use of casks for dual and multiple purposes raises an issue of long term consideration by international standardization. Accordingly IAEA is providing a regulatory requirements and guidelines as an effort for this standardization.

• Nuclear Engineering and Technology
• /
• 제43권5호
• /
• pp.405-412
• /
• 2011

Used nuclear fuel will likely be stored dry for extended periods of time in the USA. Until a final disposition pathway is chosen, the storage periods will almost definitely be longer than were originally intended. The ability of the important-tosafety structures, systems, and components (SSCs) to continue to meet storage and transport safety functions over extended times must be determined. It must be assured that there is no significant degradation of the fuel or dry cask storage systems. Also, it is projected that the maximum discharge burnups of the used nuclear fuel will increase. Thus, it is necessary to obtain data on high burnup fuel to demonstrate that the used nuclear fuel remains intact after extended storage. An evaluation was performed to determine the conditions that may lead to failure of dry storage SSCs. This paper documents the initial technical gap analysis performed to identify data and modeling needs to develop the desired technical bases to ensure the safety functions of dry stored fuel.

• Nuclear Engineering and Technology
• /
• 제50권2호
• /
• pp.313-317
• /
• 2018

Licenses for the storage of spent nuclear fuel (SNF) and vitrified highly active waste in casks under dry conditions are limited to 40 years and have to be renewed for prolonged storage periods. If such a license renewal has to be expected since as in accordance with the new site selection procedure a final repository for spent fuel in Germany will not be available before the year 2050. For transport and possible unloading and loading in new casks for final storage, the integrity and the maintenance of the geometry of the cask's inventory is essential because the SNF rod cladding and the cladding of the vitrified highly active waste are stipulated as a barrier in the storage concept. For SNF, the cladding integrity is ensured currently by limiting the hoop stress and hoop strain as well as the maximum temperature to certain values for a 40-year storage period. For a prolonged storage period, other cladding degradation mechanisms such as inner and outer oxide layer formation, hydrogen pick up, irradiation damages in cladding material crystal structure, helium production from alpha decay, and long-term fission gas release may become leading effects driving degradation mechanisms that have to be discussed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제13권2호
• /
• pp.141-154
• /
• 2015

In general, conventional criticality analysis for spent fuel transport/storage systems have been performed based on the assumption of fresh fuel concerning the potential uncertainties from number density calculations of actinide nuclides and fission products in spent fuel. However, these evaluation methods cause financial losses due to an excessive criticality margin. In order to overcome this disadvantage, many studies have recently been conducted to design and commercialize a transportation and storage cask applied to the Burnup Credit (BUC). This study conducted an assessment to ensure criticality safety for reactor operating parameters, axial burn-up profiles and misload accident conditions, which are the factors that are likely to affect criticality safety when the BUC is applied to the dual-purpose cask under development at the KOrea RADioactive waste agency (KORAD). As a result, it was found that criticality resulting from specific power, changed substantially and relied on conditions of low enrichment and high burn-up. Considering the end effect in the case of high burn-up produced a positive-definite result. In particular, the increment of maximum effective multiplication factors due to misloading was 0.18467, confirming that misload is a factor that must be taken into account when applying the BUC. The results of this study may therefore be utilized as references in developing technologies to apply the BUC to domestic models and operational procedures or preventing any misload accidents during the process of spent fuel loading.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1439-1447
• /
• 2023

The fuel cycle characteristics of the IVG.1M reactor were studied within the framework of the research reactor conversion program to modernize the IVG.1M reactor. Optimum use of the nuclear fuel and reactor was achieved through routine methods which included partial fuel reloading combined with scheduled maintenance operations. Since, the additional problem in planning the fuel cycle of the IVG.1M reactor was the poisoning of the beryllium parts of the core, reflector, and control system. An assessment of the residual power and composition of spent fuel is necessary for the selection and justification of the technology for its subsequent management. Computational studies were performed using the MCNP6.1 program and the neutronics model of the IVG.1M reactor. The proposed scheme of annual partial fuel reloading allows for maintaining a high reactor reactivity margin, stabilizing it within 2-4 β_eff for 20 years, and achieving a burnup of 9.9-10.8 MW × day/kg U in the steady state mode of fuel reloading. Spent fuel immediately after unloading from the reactor can be placed in a transport packaging cask for shipping or safely stored in dry storage at the research reactor site.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제16권3호
• /
• pp.315-330
• /
• 2018

A subcritical facility must ensure nuclear criticality safety under all circumstances. For this purpose, it is essential to have a procedure to validate that calculated values do not exceed upper subcritical limit (USL), determined by quantifying the bias and uncertainty. However, there are several validation methodologies of nuclear criticality safety and these can yield different USL. Therefore, it is necessary to analyze the validity of the methodologies to establish one methodology that can provide the most appropriate USL. In this study, two documents, a guide for validation of nuclear criticality safety calculational methodology (NUREG/CR-6698) and a criticality benchmark guide for light water reactor fuel in transport and storage package (NUREG/CR-6361), are compared and analyzed. In particular, the methodology in NUREG/CR-6361 is applied to the USLSTATS code. However, the analysis results show that the methodology in NUREG/CR-6698 is more appropriate, for several reasons. This is applied to decision of USL to design casks using SCALE code version 6.1.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.614-620
• /
• 2003

KAERI has developed DUPIC nuclear fuel with the refabrication of spent PWR fuel discharged from domestic nuclear power plant by a dry process at M6 hot-cell in IMEF To verify the performance of DUPIC nuclear fuel, irradiation test at the operating conditions of commercial power plant is essential. Since the HANARO research reactor of KAERI does not have fuel test loop(FTL) for irradiating nuclear fuel under high temperature and high pressure conditions, DUPIC fuel cannot be irradiated in the FTL of HANARO. In the 13-th PRM among Korea, Canada, USA and IAEA, AECL proposed that KAERI fabricated DUPIC fuel can be irradiated in the FTL of the NRU research reactor without charge of neutrons. The transportation quantity of DUPIC fuel to Canada is 10 elements(about 6kg). This transportation package is classified as the 7-th class according to "recommendation on the transport of dangerous goods" made by the United Nations. In case of air shipment, until now, there is no proper air transportation cask for DUPIC fuel. In case of sea transportation is possible but requires very high cost.high cost.