• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1567-1576
• /
• 2023

The reactor containment building (RCB) in nuclear power plants (NPPs) plays an important role in protecting the reactor systems from external loads as well as preventing radioactive leaking. As we witnessed the nuclear disaster at Fukushima Daiichi (Japan) in 2011, the earthquake is one of the major threats to NPPs. The purpose of this study is to evaluate effects of concrete material models and presstressing forces on the seismic performance evaluation of RCB in NPPs. A typical RCB designed in Korea is employed for a case study. Detailed three-dimensional nonlinear finite element models of RCB are developed in ANSYS. A series of pushover analyses are then performed to obtain the pushover curves of RCB. Different capacity curves are compared to recognize the influence of different material models on the nonlinear behavior of RCB. Additionally, the effects of prestressing forces on the seismic performances of the structure are also investigated. Moreover, a set of damage states corresponding to damage evolutions of the structures is proposed in this study.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2997-3009
• /
• 2023

The Passive containment Air-cooling System (PAS) can effectively remove the decay heat of the modular small nuclear reactor after an accident. The details of natural convection around the dome, which is a key part of PAS, were investigated numerically in the present study. The thermal dynamics around the dome were studied through the temperature, pressure and velocity contours and the streamlines. Additionally, the formation of the buoyant plume at the top of the dome was investigated. The results show that with the increase of Ra, the lift-off point moves toward the bottom of the dome, and the eddy under the buoyant plume grows larger gradually, which enhances the heat transfer. And the heat transfer along the dome surface with different truncation angles was investigated. As the angle increases, the heat transfer coefficient becomes stronger as well. Consequently, a newly developed heat transfer correlation considering the influence of truncation angle for the dome is proposed based on the simulated results. This study could provide a better understanding of natural convection around the dome of PAS and the proposed correlation could also offer more predictive value in the improvement of nuclear safety.

• Nuclear Engineering and Technology
• /
• 제18권3호
• /
• pp.183-193
• /
• 1986

실제 발전소규모의 HDR 격납용기 실험에서 기존의 격납용기 해석모델에 많은 문제점들이 있다는 것이 밝혀졌는데, 그 중의 하나가 단기 (0∼2초) 압력 차이 계산이다. 격납용기의 각 구분방 사이의 압력차이는 질량 흐름율, 유체밀도, 마찰상실계수, 흐름면적비 등에 의존하는데, 각 요소가 압력 차이의 실험값과 계산값의 불일치에 어느 정도의 영향을 주는가는 정확하게 알려져 있지 않다 본 연구에서는 기존의 해석모델을 개선하기 위해 지금까지 상수로 간주되어 온 마찰상실계수를 압력과 압력차이 등의 함수로 제시되었다. COMPARE 코드로 수정된 모델을 사용하여 HDR 실험에 대한 압력과 압력차이가 계산되었는데 V.42 실험값에서는 측정치와 잘 맞고, V.43의 측정치 보다는 높게, V.44 실험값보다는 조금 낮은 결과를 보였다.

• 한국전산구조공학회논문집
• /
• 제20권3호
• /
• pp.353-364
• /
• 2007

이 논문에서는 원전 격납건물의 극한내압능력 및 파괴모드 평가를 위해 개발된 비선형 유한요소해석 프로그램 NUCAS 코드에 대하여 기술하였다. NUCAS는 미시적인 재료모델을 도입한 퇴화 쉘 요소와 탄소성 재료모델을 도입한 저차고체요소로 구성되어 있고, 퇴화 쉘 요소와 저차고체요소는 유한요소에서 발생할 수 있는 강성과대(overstiffness) 및 묶임현상(locking phenomenon)을 방지하기 위해서 각각 가변형도법(assumed strain method)과 개선된 가변형도법(enhanced assumed strain method)을 적용하였다. 개발된 NUCAS코드의 성능을 검증하기 위해서 다양한 철근콘크리트 구조물의 벤치마크 테스트를 수행하였고, 그 결과로부터 이 논문에서 개발한 유한요소해석 프로그램의 해석결과는 실험결과와 잘 일치하였다.

• 한국지진공학회논문집
• /
• 제10권1호
• /
• pp.63-74
• /
• 2006

원전 구조물 및 주요기기의 지진 안전성 평가에서는 내진성능을 정량화하는 방법으로 취약도 분석이 사용되고 있다. 지진취약도 분석은 격납건물의 설계 시 반영된 보수성을 배제한 실질적인 내진성능을 평가하는 것으로 이러한 보수성을 성능 및 응답에 관련된 확률론적 변수로 고려하여 평가하게 된다. 본 연구에서는 비선형 지진 해석으로부터 얻은 구조물의 변위응답을 기초로 한 지진취약도 분석 방법을 제시하였다. 또한 원전부지에서 선정된 발생가능한 근거리지진, 원거리지진, 설계지진 및 확률론적 시나리오지진을 시나리오지진으로 선정하고 이들 지진동에 대한 비선형 지진해석을 통하여 한국 표준형 원전 격납건물의 지진취약도를 평가하였다.

• 한국지진공학회논문집
• /
• 제19권1호
• /
• pp.1-11
• /
• 2015

In order to perform a soil-isolation-structure interaction analysis of seismically isolated nuclear power plant (NPP) structures, the nonlinear behavior of a seismic isolation system may be converted to an equivalent linear model used in frequency domain analysis. Seismic responses for seismically isolated NPP containment structures subjected to a simple artificial acceleration history and different site class earthquakes are evaluated for the equivalent-linear and nonlinear models that have been applied to lead-rubber bearing (LRB) modeling. It can be observed that the maximum displacements of the equivalent linear model are larger than that of the nonlinear model. From the floor response spectrum analysis for the top of NPP containment structures, it can be observed that the spectral acceleration of an equivalent linear model at about 0.5 Hz frequency is about 2~3 times larger than that of a nonlinear model.

• Nuclear Engineering and Technology
• /
• 제36권6호
• /
• pp.512-527
• /
• 2004

This paper describes the finite element (FE) analysis results of a 1/4 scale model of a prestressed concrete containment vessel (PCCV) by considering the tension stiffening effect, which is a result of the bond effect between the concrete and the steel. The tension stiffening model is assumed to be an exponential form based on the relationship between the average stress and the average strain of the concrete. The objective of the present FE analysis is to evaluate the ultimate internal pressure capacity of the PCCV, as well as its failure mechanism, when the PCCV model is subjected to a monotonous internal pressure beyond is design pressure capacity. With the commercial code ABAQUS, the FE analysis used two concrete failure criteria: a 2-dimensional axi-symmetric model with modified Drucker-Prager failure criteria and a 3-dimensional model with a damaged plasticity mod디. The results of our FE analysis on the ultimate pressure capacity and failure modes of PCCV have a good agreement with the experimental data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.916-919
• /
• 2003

In this paper, we deal with a development of measurement system to apply the leakage rates test of primary containment in nuclear power plant. The measurement test about leakage rates in primary containment is one sort of test to prove safety of nuclear power plant. The parameters which are measured to calculate leakage rates are drybulb temperature, dew point temperature(or relative humidity), absolute pressure and flow. Overall, the measurement system consists of sensor module for data acquisition of the parameters, transfer module for wireless data communication and control module to control system and to calculate leakage rates. Because existing measurement systems are difficult to set in field, we pursued convenience of use, we applied wireless data communication and individual form module using battery. We also changed for the better in confidence. Recently, we are developing a drybulb temperature and a dew point temperature sensor module. We describe about function of developed measurement system, its standard and an plan for verification of measurement system.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1125-1139
• /
• 2023

The system-integrated modular advanced reactor 100 (SMART100), an integral-type pressurized water small modular reactor, is based on a novel design concept for containment cooling and radioactive material reduction; it is known as the containment pressure and radioactivity suppression system (CPRSS). There is a passive cooling system using a condensation with non-condensable gas in the SMART CPRSS. When a design basis accident such as a small break loss of coolant accident (SBLOCA) occurs, the pressurized low containment area (LCA) of the SMART CPRSS leads to steam condensation in an incontainment refuelling water storage tank (IRWST). Additionally, the steam and non-condensable gas mixture passes through the CPRSS heat exchanger (CHX) submerged in the emergency cooldown tank (ECT) that can partially remove the residual heat. When the steam and non-condensable gas mixture passes through the CHX, the non-condensable gas can interrupt the condensation heat transfer in the CHX and it degrades CHX performance. In this study, condensation heat transfer experiments of steam and non-condensable gas mixture in the natural circulation loop were conducted. The pressure, temperature, and effects of the non-condensable gas were investigated according to the constant inlet steam flow rate with non-condensable gas injections in the loop.

• 한국전산유체공학회지
• /
• 제10권3호
• /
• pp.9-18
• /
• 2005

During a hypothetical severe accident in a nuclear power plant (NPP), hydrogen is generated by the active reaction of fuel-cladding and steam in the reactor pressure vessel and released with steam into the containment. In order to mitigate hydrogen hazards possibly occurred in the NPP containment, hydrogen mitigation system (HMS) is usually adopted. The design of the next generation NPP (APR1400) designed in Korea specifies 26 passive autocatalytic recombiners and 10 igniters installed in the containment for the hydrogen mitigation. in this study, the analysis of the hydrogen and steam behavior during a total lose of feed water (TLOFW) accident in the APR1400 containment has been conducted by using the CFD code GASFLOW. During the accident, a huge amount of hot water, steam, and hydrogen is released in the in-containment refueling water storage tank (IRWST). The current design of the APR1400 includes flap-type dampers at the IRWST vents which are operated depending on the pressure difference between inside and outside of the IRWST. it was found that the flaps strongly affects the flow structure of the steam and hydrogen in the containment. The possibilities of a flame acceleration and transition from deflagration to detonation (DDT) were evaluated by using Sigma-Lambda criteria. Numerical results indicate the DDT possibility could be heavily reduced in the IRWST compartment when the flaps are installed.