• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.131-136
• /
• 1999

In this study, novel activated silicate grout solution for injection grouting was prepared by the reaction of ordinary waterglass with alkaline earth metal salts mixture by means of the high-speed stirring method with strong shearing force, and its chemical and physical properties were investigated. The variation of its gelation time plotted with the amount of dilution water showed that this novel silicate had better gelation characteristics in comparison with ordinary waterglass. And some other engineering characteristics of this grout such as durability and mechanical properties were investigated experimentally. The whole experimental results established that this novel silicate grout was a good alternative with an existing ordinary waterglass grouting method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.189-196
• /
• 2004

In this study, the colloidal silica grouts (PSG) with novel chemical compositions for permanent reinforcement and water cut-off of the ground were prepared and their engineering charateristics were investigated. The optimum mixing recipes for both homogeneous solution grouts and heterogeneous suspension grouts were investigated and established through many repeated lab tests. The various physical properties(such as compressive strength, durability and syneresis) of the grout gels derived from the colloidal silica were investigated and compared with those of the well-known existing watergalss grouts. The all experimental results showed that the novel colloidal silica grouts(PSG) had greatly excellent performances as permanent grouts, especially in comparison with the existing watergalss grouts.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.571-583
• /
• 2020

Permeation grouting is of great significance for consolidating geo-materials without disturbing the original geo-structure. To dip into the filtration-induced pressure increment that dominates the grout penetration in permeation grouting, nonlinear filtration coefficients embedded in a convection-filtration model were proposed, in which the volume of cement particles in grout and the deposited particles of skeleton were considered. An experiment was designed to determine the filtration coefficients and verify the model. The filtration coefficients deduced from experimental data were used in simulation, and the modelling results matched well with the experimental ones. The pressure drop revealed in experiments and captured in modelling demonstrated that the surge of inflow pressure lagged behind the stoppage of flow channels. In addition, both the consideration of the particles loss in liquid grout and the number of filtrated particles on pore walls presented an ideal trend in filtration rate, in which the filtration rate first rose rapidly and then reached to a steady plateau. Finally, this observed pressure drop was extended to the grouting design which alters the water to cement (W/C) ratio so as to alleviate the filtration effect. This study offers a novel insight into the filtration behaviour and has a practical meaning to extend penetration distance.

• 콘크리트학회논문집
• /
• 제22권3호
• /
• pp.419-426
• /
• 2010

이 논문에서는 포스트텐션 구조물에 적용되는 그라우팅 품질확보를 위한 재료개선 및 실험과정을 기술하였다. 그라우팅이란 강연선이 삽입된 덕트를 시멘트물질로 채우는 공정이다. 국내에서는 아직 그라우팅의 품질과 포스트텐션 구조물의 내구성에 대한 관계가 인식되지 않아 적절한 품질관리에 어려움이 있다. 국내표준시험법은 강연선에 의한 심지효과(wick effect)를 고려하지 않기 때문에 시공 시 발생할 수 있는 재료분리량을 평가하기 어렵다. 따라서 현 품질기준을 만족하는 그라우트를 사용하더라도, 시공 시 과다한 불리딩 수나 재료수축이 발생할 수 있다. 이 연구에서는 그라우트에 관련된 해외기준과 표준시험법을 조사하여 국내기준 및 표준시험법과 비교한 후 해외기준에 준하는 성능을 나타낼 수 있는 그라우트 구성성분비 및 혼화제를 제시하여 보았다. 개선된 그라우트의 성능을 해외표준시험법에 따라 일반적으로 적용되고 있는 그라우트재와 비교하였으며 PC빔의 덕트형상을 고려한 목업시험을 통하여 흐름유형(flow pattern) 및 충전성능을 관찰하였다. 이 실험을 통하여 그라우팅의 성능은 재료특성에 의하여 높은 영향을 받으며 적용 대상의 기하학적 형상에 따라 상이한 충전특성을 가진다는 것 알 수 있었다.

• 콘크리트학회논문집
• /
• 제22권3호
• /
• pp.409-417
• /
• 2010

지진에 의한 사회기반 구조물의 손상은 대형참사를 유발할 가능성이 크므로, 적절한 내진성능평가가 이루어져야한다. 특히 지진하중 하에서 구조물의 거동은 상부 하중을 지탱하는 기둥의 거동에 지배되므로 기둥에 대한 해석 및 실험을 통한 내진성능평가는 가장 핵심적인 요소이다. 현재 내진성능평가 실험의 일환으로 준정적실험, 유사동적실험, 진동대실험 등이 대표적으로 수행되고 있으며 이러한 실험을 수행 시 시험체의 크기, 실험장비 성능의 한계, 경제적인 이유 등으로 원형 구조물을 대신하여 축소모형을 통해 실험을 수행하고 있다. 이러한 축소모형실험을 위해서는 적절한 상사법칙을 적용해야 하는데, 현재 일반적으로 적용되고 있는 상사법칙은 탄성범위 내에서 유도가 되어 있기 때문에 지진하중하 구조물의 비탄성 거동을 예측하는데 무리가 있다. 또한 마이크로콘크리트를 사용한 축소모형에 대해서는 필연적으로 재료특성에 있어서 원형재료와 축소모형재료 사이에 왜곡이 발생하여 결과의 신뢰성에 영향을 주게된다. 따라서 이 연구에서는 재료의 왜곡과 비탄성 거동을 고려하여 새로운 상사법칙을 제시하였다.

• Advances in materials Research
• /
• 제11권3호
• /
• pp.237-250
• /
• 2022

The cone bolts with expanded front ends supply improved anchoring performances and increase energy absorbing capacities due to ploughing in the grouted drills. Within this study, use of a novel energy absorber for the cone bolt heads were investigated to assess its design in terms of supplying high support performances. Additionally, different grout material designs were tested to investigate whether the energy absorption capacities of the rock bolts can be improved using a silicone based thermoset polymer (STP) additive. To determine load bearing and energy absorption capacities, a series of deformation controlled pull-out tests were carried out by using bolt samples grouted in rock blocks. According to the results obtained from this study, maximum load bearing capacities of cone bolts are similar and mostly depend on the steel material strength, whereas the energy absorption capacity was determined to significantly vary in accordance with the displacement limits of the shanks. As a result of using STP additive and new polyamide absorber rings, displacement limits without the steel failure increase. The STP additive was found to improve the energy absorption capacities of grouted cone bolts. The absorber rings designed within this study were also assessed to be highly effective and able to double up the energy absorption capacities of the cone bolts.

• Advances in concrete construction
• /
• 제9권6호
• /
• pp.537-545
• /
• 2020

In order to reduce the usage of cement slurry in grouting engineering and consume the tunnel excavation waste soil, a new geopolymeric grouting material (GGM) was prepared by combine completely weathered granite (CWG) and blast-furnace slag (BFS), which can be applied to in-situ grouting treatment of completely weathered granite strata. The results showed CWG could participate in the geopolymerization process, and GGM slurry has the characteristics of short setting time, high flowability, low viscosity, high stone rate and high mechanical strength, and a design method of grouting pressure based on viscosity evolution was proposed. By adjusted the content of completely weathered granite and alkali activator concentration, the setting time of GGM were ranged from 5 to 30 minutes, the flowability was more than 23.5 cm, the stone rate was higher than 90%, the compressive strength of 28 days were 7.8-16.9 MPa, the porosity were below 30%. This provides a novel grouting treatment and utilizing excavated soil of tunnels in the similar strata.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.769-785
• /
• 2015

Although timber structures have been extensively used in underground temporary supporting system, their actual performance is poorly understood, resulting in potentially conservative and over-engineered design. In this paper, a novel wireless sensor technology, SmartPlank, is introduced to monitor the field performance of timber structures during underground construction. It consists of a wooden beam equipped with a streamlined wireless sensor node, two thin foil strain gauges and two temperature sensors, which enables to measure the strain and temperature at two sides of the beam, and to transmit this information in real-time over an IPv6 (6LowPan) multi-hop wireless mesh network and Internet. Four SmartPlanks were deployed at the London Underground's Tottenham Court Road (TCR) station redevelopment site during the Stair 14 excavation, together with seven relay nodes and a gateway. The monitoring started from August 2013, and will last for one and a half years until the Central Line possession in 2015. This paper reports both the short-term and long-term performances of the monitored timber structures. The grouting effect on the short-term performance of timber structures is highlighted; the grout injection process creates a large downward pressure on the top surface of the SmartPlank. The short and long term earth pressures applied to the monitored structures are estimated from the measured strains, and the estimated values are compared to the design loads.