• Bulletin of the Korean Chemical Society
• /
• 제6권2호
• /
• pp.68-73
• /
• 1985

Normal modes of solids HF, HCl and polyethylene having the exciting spectrometric phenomena have been evaluated by taking the lowest temperature phase of these species in the solid. The solids HF and HCl have the same space group as C$_{2}{\nu}$, and polyethylene has a space group with D$_{2h}$. The normal modes were obtained by the valence force field with modified force constants and a quantitative description of the normal mode is adjusted by the potential energy distribution (PED). From the PED, the most fittable force constants are also obtained. We have intended to calculate the normal modes by using the smallest size of the model and the simple computational process. To remove the edge effects being occurred in constructing the single cluster model, different from the boundary condition being generally used up to now, the idea of pseudolattice method being successfully applied to MO calculations of solid was extended to normal mode analysis in order to give the same environment for all moecules in a chosen cluster. By using the above valence force field and boundary condition, we obtain the assigned frequencies and compare those results with the results obtained by others.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.392-398
• /
• 1998

In order to check the validity of nonlinear normal modes of continuous, systems by means of the energy-based formulation, we consider a beam with a nonlinear boundary condition. The initial and boundary e c6nsl of a linear partial differential equation and a nonlinear boundary condition is reduced to a linear boundary value problem consisting of an 8th order ordinary differential equations and linear boundary conditions. After obtaining the asymptotic solution corresponding to each normal mode, we compare this with numerical results by the finite element method.

• 대한화학회지
• /
• 제64권6호
• /
• pp.350-353
• /
• 2020

물 분자내의 OH 신축진동(stretching vibration) 운동을 나타내는 정규모드(normal mode)와 국소모드(local mode) 진동수들을 비교하여 수소결합한 물 분자에 대한 국소모드에 기반한 계산의 타당성을 조사하였다. 물 분자의 단량체, 이합체, 삼량체에 대한 계산을 수행하여 분자 클러스터 크기가 커짐에 따라 국소모드 진동수, 국소모드의 비조화성, 그리고 국소모드와 정규모드 진동수들의 유사성이 어떤 경향성을 보이는지 순이론적 양자화학 계산 방법으로 연구하였다. 단량체에서 삼량체로 분자의 갯수가 증가할수록 OH 결합의 비조화성은 증가하며 국소모드와 정규모드 진동수 간의 차이는 줄어드는 것으로 나타났다. 따라서, 응축상에 존재하는 물 분자들의 OH 신축 진동수의 이론적 계산은 비조화성을 쉽게 다룰 수 있는 국소모드에 기반한 방식이 적절할 수 있음을 확인하였다.

• 디지털융복합연구
• /
• 제12권2호
• /
• pp.271-276
• /
• 2014

무선 센서 네트워크의 수명 및 성능은 각 센서 노드들의 에너지 효율과 밀접한 관련이 있다. 본 논문에서는 센서 노드의 에너지 효율을 높이기 위해 센서 노드의 동작 상태를 정상, 절전, 및 비활성 모드로 나눈다. 정상 모드로 동작하는 센서 노드는 정상 주기로 센싱 및 데이터 전송을 하지만, 절전 모드에서는 그 주기를 늘임으로써 에너지 소비를 줄인다. 센싱 및 데이터 전송을 하지 않는 비활성 모드에서는 에너지 소비가 최소화된다. 또한, 제안 알고리즘은 센싱 데이터가 이전의 값과 동일할 경우 전송을 하지 않음으로써 불필요한 에너지 소비를 줄일 수 있다. 제안 알고리즘은 Tiny OS 기반의 ZigbeX 플랫폼에 구현되었으며, NS-2를 사용하여 그 성능을 분석하였다. 성능 분석결과 제안 알고리즘이 전체 센서 노드의 에너지 소비 및 그 표준편차를 효율적으로 줄임으로써 무선 센서 네트워크의 수명을 향상시킬 수 있음을 확인하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권5호
• /
• pp.265-270
• /
• 2006

In this paper EMI problems with induction motor drive system using multi-level inverters are investigated. The high power multi-level inverter usually operates with low switching frequency and produces large noises. Generally, EMI consists of the conduction component through source lines and emission component emitted to the space. This conduction component can be classified to the common-mode between source line and ground, and the normal-mode between lines. The EMI filters for the induction motor drive system are designed and implemented to reduce EMI noise. Finally the designed system is verified by the experiment. The experimental results show that both the normal mode and common mode noises are greatly reduced compared to the system without filters.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.21-25
• /
• 2005

In the dynamic analysis of a mechanism, if one or more of the components are flexible, then the simulation will not be accurate because of the violation of the rigid body assumption. Mode shapes are used to represent the dynamic behavior of an elastic structure. A modal synthesis method which uses a combination of normal modes, constraint modes, and attachment modes, was used to represent effectively the elastic deformation of a flexible multibody. Since the combination of these modes should be different for each type of connecting part, the modal synthesis method was studied for the various types of interconnecting joints. In addition, the analysis procedure for the flexible body was explained. A satellite system with flexible solar panels was chosen as an example to show the effectiveness of the proposed method.

• Geomechanics and Engineering
• /
• 제13권3호
• /
• pp.431-446
• /
• 2017

Rock bridges in rock masses would increase the bearing capacity of Non-persistent discontinuities. In this paper the effect of ratio of rock bridge surface to joint surface, rock bridge shape and normal load on failure behaviour of intermittent rock joint were investigated. A total of 42 various models with dimensions of $15cm{\times}15cm{\times}15cm$ of plaster specimens were fabricated simulating the open joints possessing rock bridge. The introduced rock bridges have various continuities in shear surface. The area of the rock bridge was $45cm^2$ and $90cm^2$ out of the total fixed area of $225cm^2$ respectively. The fabricated specimens were subjected to shear tests under normal loads of 0.5 MPa, 2 MPa and 4 MPa in order to investigate the shear mechanism of rock bridge. The results indicated that the failure pattern and the failure mechanism were affected by two parameters; i.e., the ratio of joint surface to rock bridge surface and normal load. So that increasing in joint area in front of the rock bridge changes the shear failure mode to tensile failure mode. Also the tensile failure change to shear failure by increasing the normal load.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.261-265
• /
• 2002

In the machining tool avoid vibration problem have an effect on high precision as well as statical and thermal characteristics. Therefore overcome this problem is essential to advance of machine tool and machining skill. Even though vibration arises owing to a variety of causes, in this paper vibration analysis of column as a major part of machine tool structures is presented. At this procedure vibration analysis applied to mode synthesis method using a attachment mode .

• 한국전자파학회논문지
• /
• 제14권9호
• /
• pp.899-903
• /
• 2003

본 논문에서는 기생소자 효과를 이용한 이동단말기용 광대역 안테나를 연구하였다. 기생소자에 관한 효과를 관찰하기 위해 기생소자는 급전이 되지 않는 원통형 도체를 사용하였다. 원통 도체의 외경이 증가함에 따라 두 번째, 세 번째 공진 주파수 특성이 급격히 변함을 알 수 있었다. 4.5 w의 외경을 가지는 원통형 도체 기생소자가 삽입된 경우 normal mode 헬리컬 안테나는 반사손실 -5 dB를 기준으로 900 MHz의 밴드폭을 얻었다.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1922-1927
• /
• 2003

Nonlinear normal mode (NNM) vibration, in a nonlinear dual mass Hamiltonian system, which has 6$\^$th/ order homogeneous polynomial as a nonlinear term, is studied in this paper. The existence, bifurcation, and the orbital stability of periodic motions are to be studied in the phase space. In order to find the analytic expression of the invariant curves in the Poincare Map, which is a mapping of a phase trajectory onto 2 dimensional surface in 4 dimensional phase space, Whittaker's Adelphic Integral, instead of the direct integration of the equations of motion or the Birkhoff-Gustavson (B-G) canonical transformation, is derived for small value of energy. It is revealed that the integral of motion by Adelphic Integral is essentially consistent with the one obtained from the B-G transformation method. The resulting expression of the invariant curves can be used for analyzing the behavior of NNM vibration in the Poincare Map.