• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.243-249
• /
• 2021

In this paper, the sensing characteristics of a double cladding fiber (DCF) long-period fiber grating (LPFG) to the surrounding refractive index (SRI) are studied. The outer cladding of the DCF plays the role of the overlay, thus, the mode transition (MT) phenomenon of DCF can be induced by etching the outer cladding radius instead of coating overlays. The response characteristics of the effective refractive index (ERI) of the cladding mode to the outer cladding radius are analyzed. It is found that in the MT range, the change rate of ERIs of cladding modes is relatively larger than that for other ranges. Further, based on the features of the mode transition region (MTR), the phase-matching curve of the 11^th cladding mode is investigated, and the response of the DCF-LPFG to the SRI is characterized by the change of wavelength intervals between the dual peaks under different outer cladding radii. The numerical simulation results show that the SRI sensitivity is greatly improved, which is available to 3484.0 nm/RIU with the fitting degree 0.998 in the SRI range of 1.33-1.37. The proposed DCF-LPFG can provide new theoretical support for designing the DCF-LPFG refractive index sensor with excellent performances of sensitivity, linearity and structure.

• Computers and Concrete
• /
• 제28권5호
• /
• pp.507-519
• /
• 2021

In this study, a new procedure was proposed in order to predict the crack pattern and failure mode of steel fiber reinforced concrete (SFRC) corbels. Moreover, an experimental study was carried out in order to investigate the effect of several parameters, such as compressive strength, tensile strength, steel fiber ratio, shear span on the mechanical behavior of SFRC corbels in detail. Totally, 24 RC and SFRC corbels were prepared for the experimental study. Experimental results indicate that each investigated parameter has noticeable effect on the load capacity and failure mode of SFRC corbels. Moreover, finite element (FE) model of the tested corbels were prepared and efficiency of FE model was investigated for further studies. Comparison of FE and experimental results show that there is an acceptable fit between them regarding load capacity and crack patterns. Thereafter, parametric study was carried out via FE analyses in order to obtain a methodology for crack pattern and failure mode prediction of SFRC corbels. As a result of parametric studies, a new procedure was proposed as flowcharts in order to predict the failure mode of SFRC corbels for normal and high strength concrete class separately.

• Journal of Chest Surgery
• /
• 제27권8호
• /
• pp.656-663
• /
• 1994

Evaluation of heart function is of importance in assessing the results of valvular heart surgery. Information on volume and functional change of heart chamber can be obtained by cardiac catheterization and echocardiography. We studied 41 patients with mitral stenosis[MS] and 23 patients with mitral regurgitation[MR] using M-mode echocardiography before and after mitral valve replacement[MVR] at Pusan Paik Hospital. Preoperative cardiac catheterization was available in 56 cases, and the results were obtained as follows. 1. In patients with MS, preoperative average LV end-diastolic dimension[EDD] and end-systolic dimension[ESD] were remained within normal range, but postoperative EDD and ESD were significantly decreased[P<0.01]. The preoperative and postoperative LV ejection fraction[EF] were remained within the normal range and no significant change[P>0.05]. The preoperative left atrial dimension[LAD] was enlarged considerably above normal[P<0.01], but was significantly decreased after surgery[P<0.001]. The preoperative LV posterior wall thickness[PWTh] was within normal range, and no significant change after surgery[P>0.05]. 2. In patients with MR, preoperative average end-diastolic dimension[EDD] and end-systolic dimension[ESD] were significantly greater than normal[P<005], but postoperative EDD and ESD were significantly decreased[P<0.01]. The preoperative LV ejection fraction[EF] and fractional shortening[FS] were within normal range, and no significant change after surgery[P>0.05].The preoperative left atrial dimension[LAD] was enlarged considerably above normal [P<0.01], but was significantly decreased after surgery[P<0.001].The preoperative LV posterior wall thickness[PWTh] was within normal range, and no significant change after surgery[P>0.05].

• 터널과지하공간
• /
• 제20권5호
• /
• pp.344-351
• /
• 2010

닫힌 균열을 따라 발생하는 전단거동을 Mode II 크랙의 시작과 진행으로 묘사할 수 있다. 파괴역학 이론에서는 순수 Mode II 재하에서 일반적으로 고유물성으로 인식되는 에너지 방출율(GII, Engergy Release Rate)이 한계점($G_{IIC}$)에 도달했을 때 전단거동이 시작된다고 예측한다. 지난 몇 년간 퍼듀대학의 암반공학그룹은 한계 에너지 방출률($G_{IIC}$)의 구속응력(normal stress)과 닫힌 균열의 거칠기에 대한 관계를 실험적으로 접근해왔다. 먼저 많은 실험들이 아크릴 재료를 대상으로 실행되었는데, 이는 광탄성(Photoelastic) 방법을 이용한 균열 끝(fracture tip)의 응력 집중 영역을 시각화하는 것을 가능케 해 주었다. 그 다음 실험 연구는 비교적 낮은 압축강도를 지닌 균질한 석고에 시행되었고, 최근에는 더 높은 압축강도를 지닌 재료를 대상으로 실험연구를 수행하였다. 그 예로 시멘트로 만든 시료 불록에 직접 전단 실험을 하였는데, 이전의 실험들과 마찬가지로 불연속면의 최대마찰각(Peak Friction Angle)이 잔류 마찰각(Residual Friction angle)과 비슷할 때만이 $G_{IIC}$가 재료의 고유물성으로 간주 될 수 있다는 점을 확인할 수 있었다. 그렇지 않은 경우에 한계 에너지 방출율($G_{IIC}$)은 구속응력과 함께 증가한다.

• 비파괴검사학회지
• /
• 제31권4호
• /
• pp.367-373
• /
• 2011

유도초음파를 활용한 진단 기술은 기존의 체적파를 이용한 진단 기법과 달리 장거리 진단의 장점 때문에 널리 사용된다. 대부분의 산업현장에서는 배관이 코팅되어 있거나 땅속이 묻혀있다. 이러한 경우 감쇠의 영향으로 기존의 방식으로는 진단에 어려움이 있다. 본 연구에서는 배관에서 전파되는 유도초음파 전파 모드별 음장을 직교모드확장기법을 이용하여 계산하였다. 단일 탐촉자에 의해 전파되는 유도초음파의 음장과 다중 탐촉자 모델링을 바탕으로 배관에서 전파되는 음장 특성을 해석하기 위해 유도초음파 모드별 집속 기술이 사용되었다. 추가적으로 배관에서 전파되는 유도초음파를 가진하는 탐촉자의 개수에 따른 집속 민감도가 종형 모드와 휨형 모드를 이용하여 계산되었다. 본 연구를 통하여 단일 탐촉자에 의해 가진된 유도초음파와 집속 알고리즘을 적용한 다중 탐촉자에 의해 가진된 음장을 비교하여 높은 에너지가 접속 되는 것을 확인 하였다.

• Structural Engineering and Mechanics
• /
• 제9권5호
• /
• pp.449-467
• /
• 2000

The natural frequencies and the corresponding mode shapes of a non-uniform beam carrying multiple point masses are determined by using the analytical-and-numerical-combined method. To confirm the reliability of the last approach, all the presented results are compared with those obtained from the existing literature or the conventional finite element method and close agreement is achieved. For a "uniform" beam, the natural frequencies and mode shapes of the "clamped-hinged" beam are exactly equal to those of the "hinged-clamped" beam so that one eigenvalue equation is available for two boundary conditions, but this is not true for a "non-uniform" beam. To improve this drawback, a simple transformation function ${\varphi}({\xi})=(e+{\xi}{\alpha})^2$ is presented. Where ${\xi}=x/L$ is the ratio of the axial coordinate x to the beam length L, ${\alpha}$ is a taper constant for the non-uniform beam, e=1.0 for "positive" taper and e=1.0+$|{\alpha}|$ for "negative" taper (where $|{\alpha}|$ is the absolute value of ${\alpha}$). Based on the last function, the eigenvalue equation for a non-uniform beam with "positive" taper (with increasingly varying stiffness) is also available for that with "negative" taper (with decreasingly varying stiffness) so that half of the effort may be saved. For the purpose of comparison, the eigenvalue equations for a positively-tapered beam with five types of boundary conditions are derived. Besides, a general expression for the "normal" mode shapes of the non-uniform beam is also presented.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.229-234
• /
• 2002

Under the hostile influence of the extreme space environmental conditions due to the deep space and direct solar flux, the thermal control in space applications is especially of major importance. There are tight temperature range restrictions for electro-optical elements while on the other hand there are low power consumption requirements due to the limited energy sources on the spacecraft. So, we usually have strong requirement of thermal and power control module in space applications. In this paper, the design concept of a thermal and power control module in the MSC(Multi-Spectral Camera) system which will be a payload on KOMPSATII is described in terms of H/W & S/W. This thermal and power control module, called THTM(Thermal and Telemetry Module) in MSC, resides inside the PMU(Payload Management Unit) which is responsible for the proper management of the MSC payload for controlling and monitoring the temperature insides the EOS(Electro-Optic System) and gathering all the analog telemetry from all the MSC sub-units, etc. Particularly, the designed heater controller has the special mode of "duty cycle" in addition to normal closed loop control mode as usual. THTM controls heaters in open loop according to on/off set time designed through analysis in duty cycle mode in case of all thermistor failure whereas it controls heaters by comparing the thermistor value to temperature based on closed loop in normal mode. And a designed THTM provides a checking and protection method against the failure in thermal control command using the test pulse in command itself.

• Journal of Mechanical Science and Technology
• /
• 제14권9호
• /
• pp.968-977
• /
• 2000

The motion of an aircraft landing gear over a rough runway can be modeled by a nonclassically damped system subject to nonstationary random excitations. In this paper, the approximate analysis methods based on either the real or complex normal modes for the computation of nonstationary response covariances are proposed. It has been found by simulation involving a realistic example that, for the nonclassically damped random vibrational systems, the approximate solution method based on the complex normal mode is superior to other approaches with respect to the accuracy and computation time.

• Bulletin of the Korean Chemical Society
• /
• 제6권1호
• /
• pp.29-32
• /
• 1985

Normal modes of crystalline orthorhombic sulfur belonging to the space group $D_{2h}$-Fddd, have been evaluated by taking the lowest temperature phase in the solid. Normal modes are obtained by the valence force field with modified force constants and a quantitative description of the mode is adjusted by the potential energy distribution. Since the full crystal system of orthorhombic sulfur is so large, we intended to calculate the normal modes simply by constructing the imaginary box made by the infinite mass boundary. And the Raman experiment is done by using the more powerful Ar-Kr gas laser with lowering the temperature to ${\sim}10^{\circ}K$.

• Journal of Ginseng Research
• /
• 제5권1호
• /
• pp.56-64
• /
• 1981

In order to evaluate the mode of action of ginseng saponin. metabolic changes in the plasma of normal and aloxan-intoxicated rats were compared Normal groups were administered only ginseng saponin 0, 5, 50mg/kg for 16 days, but alloxan-intoxicated groups were administered alloxan 25mg/kg for 3 days in addition to ginseng saponin. (1) No significant change in the concentration of glucose, cholesterol, and triglyceride (TG) was observed in normal rats but great inhibitory effect, except elevation of TG, was observed in alloxan-intoxicated rats. However, blood urea nitrogen was elevated in both normal and alloxan- intoxicated rats by administration of ginseng saponin 50mg/kg, and it was considered to be due to the impaired kidney function caused by overdose toxicity. (2) In normal rats, COT and ALP actIn,its were not changed by administration of ginseng saponin but GPT activity was decreased significantly. In alloxan-intoxicated rats, ginseng saponin exerted inhibitory action on the elevation of COT, CPT and ALP activity. But administration of ginseng saponin Smghg was much more effective than administration of 50mg/kg. (3) There fore, we concluded that ginseng saponin has the adaptogenic activity showing little effect on normal metabolism but great preventive action on alloxan-intoxicated rats.