• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1123-1131
• /
• 2005

In this paper, optimal position of optical phase conjugator (OPC) for best compensating distorted WDM channels due to both chromatic dispersion and self phase modulation (SPM) in $8{\times}40$ Gbps WDM systems is numerically investigated, and the eye opening penalty (EOP) and bit error rate (BER) characteristics of overall WDM channels at this position is investigated, comparing with that in case of OPC placed at mid-way of total transmission length. It is confirmed that the compensation extents in WDM system with OPC is more improved by the shifting OPC position from the mid-way of total transmission length, depending on the modulation format and fiber dispersion coefficient. Ant it is confirmed that, from a viewpoint of the reception performance, EOP of each channel is more or less different with one another, but the BER characteristics of overall channels are almost equal.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.121-127
• /
• 2011

This paper presents an autonomous formation flight algorithm for micro aerial vehicles (MAVs) and its flight test results. Since MAVs have severe limits on the payload and flight time, formation of MAVs can help alleviate the mission load of each MAV by sharing the tasks or coverage areas. The proposed formation guidance law is designed using nonlinear dynamic inversion method based on 'Leader-Follower' formation geometric relationship. The sensing of other vehicles in a formation is achieved by sharing the vehicles' states using a high-speed radio data link. the designed formation law was simulated with flight data of MAV to verify its robustness against sensor noises. A series of test flights were performed to validate the proposed formation guidance law. The test result shows that the proposed formation flight algorithm with inter-communication is feasible and yields satisfactory results.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.457-462
• /
• 2023

We proposed a flexible link configuration in a system combining mid-span spectral inversion (MSSI) and dispersion management used for long-distance transmission of high-capacity optical signals such as wavelength division multiplexing signals, and examined specific methods to increase chromatic dispersion and nonlinear distortion compensation effects. The dispersion map proposed to increase the flexibility of dispersion-managed link configuration has a 'random-inverse' structure. That is, in the proposed dispersion map, the residual dispersion per span (RDPS) of each fiber span in the first half section up to the optical phase conjugator is randomly distributed, and the RDPS distribution in the second half section reverses the distribution pattern of the first section. Although the proposed dispersion map has a random distribution of RDPS, it was confirmed that the distortion compensation effect is improved due to the fact that the dispersion profile is symmetrical with respect to the optical phase conjugator. In the dispersion map of the 'random-inverse' configuration, it was also confirmed that the compensation effect of the distorted wavelength division multiplexing signal becomes improved when the magnitude of the RDPS allocated to each fiber span is large.

• Geophysics and Geophysical Exploration
• /
• v.24 no.2
• /
• pp.53-66
• /
• 2021

Velocity model building is an essential procedure in seismic data processing. Conventional techniques, such as traveltime tomography or velocity analysis take longer computational time to predict a single velocity model and the quality of the inversion results is highly dependent on human expertise. Full-waveform inversions also depend on an accurate initial model. Recently, deep neural network techniques are gaining widespread acceptance due to an increase in their integration to solving complex and nonlinear problems. This study investigated cases of seismic velocity model building using deep neural network techniques by classifying items according to the neural networks used in each study. We also included cases of generating training synthetic velocity models. Deep neural networks automatically optimize model parameters by training neural networks from large amounts of data. Thus, less human interaction is involved in the quality of the inversion results compared to that of conventional techniques and the computational cost of predicting a single velocity model after training is negligible. Additionally, unlike full-waveform inversions, the initial velocity model is not required. Several studies have demonstrated that deep neural network techniques achieve outstanding performance not only in computational cost but also in inversion results. Based on the research results, we analyzed and discussed the characteristics of deep neural network techniques for building velocity models.

• Journal of the Korean Ceramic Society
• /
• v.42 no.11 s.282
• /
• pp.749-752
• /
• 2005

When an electric field higher than a characteristic coercive field is applied to a ferroelectric such as $LiNbO_3$, the orientation of the spontaneous polarization is reversed, which causes the reversal of the sign of odd-rank tensor properties such as electro-optic and nonlinear optic coefficients. A fabrication process of insulator and periodic external field assisted poling of a z-cut $LiNbO_3$ have been optimized for a periodic $180^{\circ}$ phase inversion along z-axis. The poling jig and the poling control system, fully controlled by a computer, for high quality and reproducible PPLN fabrication have been devised. Periodically polarization reversed PPLN was adjusted based on the fabricated thickness of insulator. The poling structure of PPLN was observed under a microscope after etching PPLN samples by an etching solution ($HF:HNO_3$ = 1 : 2) for about 15 min.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.164-170
• /
• 2007

In this paper, the new method alternating with the method for forming the symmetrical distribution of power and local dispersion in high bit-rate WDM system with optical phase conjugator (OPC) is proposed. The proposed method is carried by finding out the optimal values of OPC position offset and fiber dispersion offset. It is assumed to be that NRZ-formatted 24-channels of 40 Gbps are simultaneously propagated in WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1,000 km. It is confirmed that the compensation extents of overall WDM channels are more improved by applying the induced optimal values into WDM system than those in WDM system with the conventional mid-span spectral inversion (MSSI) technique, and the searching procedure of the optimal values makes little difference of performance if the optimal value of one parameter related with another parameter. And, it is confirmed that the flexible design of WDM system with OPC is possible by effectiviely using by these optimal values. Thus, it is expected that the proposed method alternate with the forming method of the symmetrical distributions of power and local dispersion.

• Korean Journal of Optics and Photonics
• /
• v.19 no.6
• /
• pp.408-415
• /
• 2008

The characteristics of a ferroelectric-domain inverted grating fabricated by applying a high-voltage pulse at room temperature in Ti-diffused channel waveguides in z-cut $LiNbO_3$ (Ti:PPLN) were examined for channel waveguide quasi phase-matched secondharmonic generation devices. The fabrication conditions of uniform periodic domain-inversion were examined. Ti:PPLN with period ${\Lambda}=16.6{\mu}m$ for SHG were fabricated and the performances were measured. A normalized SHG efficiency as high as 473 (%/W) was obtained with 49 mm interaction length.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.150-158
• /
• 2003

In the beam pattern synthesis problem using line source, the relationship between source distribution function and beam pattern may be represented by Fourier transform pair. In this paper, a general method to synthesize the line source distribution for a desired lobe-like beam pattern is presented by developing the nonlinear inversion method based on an iterative sampling technique. This method can be applied to the synthesis of continuously distributed dielectric constants satisfying the desired inverse scattering coefficient patterns when illuminating by TE-polarized and TM-polarized plane waves to arbitrary dielectric material. Furthermore this method can also be applied to the synthesis of transmission line with arbitrary reflection coefficient patterns. Some bandstop spatial filter and dispersive transmission line filter are illustrated for generality.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.507-512
• /
• 2013

This paper proposes a new model to compensate for errors of a five-axis machine tool. A matrix with error components, that is, an error matrix, is separated from the error synthesis model of a five-axis machine tool. Based on the kinematics and inversion of the error matrix which can be obtained not by using a numerical method, an error compensation model is established and used to calculate compensation values of joint variables. The proposed compensation model does not need numerical methods to find the compensation values from the error compensation model, which includes nonlinear equations. An experiment using a double ball-bar is implemented to verify the proposed model.

• Economic and Environmental Geology
• /
• v.33 no.2
• /
• pp.101-109
• /
• 2000

The gravity measurement has been carried out to study the deep geologic structure at 331 gravity stations with an interval of 1∼1.5 km along the national road which crosses the southern part of the Korean peninsula from Pohang to Manripo. The Bouguer gravity anomalies were obtained from the observed gravity values, and interpreted by means of upward continuation using FFT (Fast Fourier Transform), Fourier-series method and nonlinear 2-D inversion method to determine the depths of Conrad and Moho discontinuities. The linear regression relations between elevations and gravity anomalies were also obtained to test isostasy in the study area. The depth of Conrad discontinuty is 13km between Pohang and Daegu, 16.5 km between Kimchon and Okchon, 9.7 km between Okchon and Daejeon, and 16.3 km near Manripo. The depth of Moho discontinuty is 32km between Pohang and Daegu, 35 km between Kimchon and Okchon, 28.7 km between Okchon and Daejeon, 40.5 km between Daejeon and Kongju, and 34.5 km between Kongju and Manripo. The result of testing isotasy indicates that the crust of this area seems to be not in perfect isostatic equilibrium but in a little undercompensated sate.