• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 연약지반처리위원회 학술세미나
• /
• pp.36-47
• /
• 1999

Terzaghi's theory of one-dimensional consolidation is restricted in its applicability to relatively thin layers and small incremental loading. Because it is assumed to infinitesimal strain and linear material function. For this reason, Gibson et al established a rigorous formulation for the one-dimensional nonlinear finite strain consolidation theory. There are some difficulties in the application of finite strain consolidation theory. The developed program consisted of several forms and modules. These forms and modules with graphic-user-interfaced format are used in analysis of consolidation practices. For the purpose of verification of developed program. the results of case study and prediction of developed program are compared. The results of comparison is fairly well with prediction and measured data. And with varying finite strain consolidation parameter, g(e) or λ(e), the sensitivity of predicted values were examined.

• Structural Engineering and Mechanics
• /
• 제9권1호
• /
• pp.89-97
• /
• 2000

A modified constitutive model has been developed for nonlinear finite element analysis of axisymmetric reinforced concrete structures, and then implemented into an existing finite element program. By comparing with the experimental results available, the present model has been validated.

• Computers and Concrete
• /
• 제2권6호
• /
• pp.455-479
• /
• 2005

This paper describes a 2D nonlinear finite element analysis (NLFEA) platform that combines heat flow analysis with realistic analysis of cracked reinforced concrete structures. The behavior models included in the structural analysis are mainly based on the Modified Compression Field Theory and the Distributed Stress Field Model. The heat flow analysis takes into account time-varying thermal loads and temperature-dependent material properties. The capability of 2D nonlinear transient thermal analysis is then implemented into a nonlinear finite element analysis program VecTor2(C) for 2D reinforced concrete membranes. Analyses of four numerical examples are performed using VecTor2, and results obtained indicate that the suggested nonlinear finite element analysis procedure is capable of modeling the complete response of a concrete structure to thermal and mechanical loads.

• Structural Engineering and Mechanics
• /
• 제4권2호
• /
• pp.139-148
• /
• 1996

Vector algorithms and the relative importance of the four basic modules (computation of element stiffness matrices, assembly of the global stiffness matrix, solution of the system of linear simultaneous equations, and calculation of stresses and strains) of a finite element computer program for inelastic analysis of reinforced concrete shells are presented. Performance of the vector program is compared with a scalar program. For a cooling tower problem, the speedup factor from the scalar to the vector program is 34 for the element stiffness matrices calculation, 25.3 for the assembly of global stiffness matrix, 27.5 for the equation solver, and 37.8 for stresses, strains and nodal forces computations on a Gray Y-MP. The overall speedup factor is 30.9. When the equation solver alone is vectorized, which is computationally the most intensive part of a finite element program, a speedup factor of only 1.9 is achieved. When the rest of the program is also vectorized, a large additional speedup factor of 15.9 is attained. Therefore, it is very important that all the modules in a nonlinear program are vectorized to gain the full potential of the supercomputers. The vector finite element computer program for inelastic analysis of RC shells with layered elements developed in the present study enabled us to perform mesh convergence studies. The vector program can be used for studying the ultimate behavior of RC shells and used as a design tool.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.1022-1027
• /
• 2008

TPE is used as alternative for rubber, the best example is the weather strip for automobile. The nonlinear material properties of weather strip were important to predict the behaviors of weather strip. Uniaxial tension and equi-biaxial tension tests were performed to achieve the nonlinear material constant and stress-strain curves. The nonlinear material constant of weather strip is evaluated by using the nonlinear finite element analysis. In this paper, the prediction for weather strip is analyzed by using commercial finite element program, ANSYS. The nonlinear finite element analysis of weather strip is executed to predict the behavior of weather strip for automobile.

• Computers and Concrete
• /
• 제5권2호
• /
• pp.155-174
• /
• 2008

A new approach for nonlinear finite element analysis of corroded reinforcements in RC structures is elaborated in the article. An algorithmic procedure for producing the tension-stiffening curve of RC elements taking into consideration most of effective parameters, e.g.: the rate of steel bar corrosion, bond-slip behavior, concrete cover and amount of reinforcement, is illustrated. This has been established on both experimental and analytical bases. This algorithm is implemented into a nonlinear finite element analysis program. The abilities of the resulted program have been studied by modeling some experimental specimens showing a reasonable agreement between the analytical and experimental findings.

• 한국지진공학회논문집
• /
• 제10권2호
• /
• pp.31-38
• /
• 2006

이 연구의 목적은 비선형 유한요소해석을 이용하여 철근콘크리트 교량의 내진성능을 평가하는데 있다. 정확하고 올바른 성능평가를 위하여 신뢰성 있는 비선형 유한요소해석 프로그램을 사용하였다. 사용된 프로그램은 철근콘크리트 구조물의 해석을 위한 RCAHEST이다. 재료적 비선형성에 대해서는 균열콘크리트에 대한 인장, 압축, 전단모델과 콘크리트 속에 있는 철근모델을 조합하여 고려하였다. 이에 대한 콘크리트의 균열모델로서는 분산균열모델을 사용하였다. 제안한 해석기법을 철근콘크리트 교량에 적용하여 비교, 분석하였다.

• 한국지진공학회논문집
• /
• 제10권3호
• /
• pp.21-33
• /
• 2006

이 연구의 목적은 비선형 유한요소해석을 이용하여 철근콘크리트 교각의 내진성능을 평가하는데 있다. 정확하고 올바른 성능평가를 위하여 신뢰성 있는 비선형 유한요소해석 프로그램을 사용하였다. 사용된 프로그램은 철근콘크리트 구조물의 해석을 위한 RCAHEST이다. 손상지수는 지진하중하의 철근콘크리트 교각의 손상을 수치적으로 정량화하는 방법으로서 제안되었다. 이 연구에서는 철근콘트리트 교각의 내진성능평가를 위해 제안한 해석기법을 신뢰성 있는 연구자들의 실험결과와 비교하여 그 타당성을 검증하였다.

• 한국지진공학회논문집
• /
• 제7권6호
• /
• pp.1-7
• /
• 2003

이 논문에서는 비선형 지반-구조물 상호작용해석을 위한 새로운 시간-주파수영역 복합법을 제시하였다. 제안한 방법은 등가선형 지반-구조물 상호작용해석 프로그램과 범용 비선형 유한요소해석 프로그램을 동시에 사용하는 실용적인 방법이다. 이 방법에서는 먼저 주파수영역에서 등가선형 지반-구조물 상호작용해석을 수행하여 유한요소 영역의 경계면에서 응답을 구한 다음, 이를 범용 비선형 유한요소해석 프로그램에 의한 비선형 동적해석의 시간의존 경계조건으로 입력한다. 제안된 방법의 검증을 위하여 2차원 지하철 정거장 구조물에 대한 지진해석을 수행하였다. 이를 위하여 등가선형 지반-구조물 상호작용해석 프로그램 KIESSI-2D와 비선형 유한요소해석 프로그램 ANSYS를 사용하였다 수치적인 해석결과로부터 이 연구에서 제안한 방법의 타당성을 확인할 수 있었다.

• Computers and Concrete
• /
• 제9권1호
• /
• pp.63-79
• /
• 2012

The purpose of this study is to evaluate the behavior and strength of prestressed concrete deep beams using nonlinear analysis. By using a sophisticated nonlinear finite element analysis program, the accuracy and objectivity of the assessment process can be enhanced. A computer program, the RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), was used for the analysis of reinforced concrete structures. Tensile, compressive and shear models of cracked concrete and models of reinforcing and prestressing steel were used to account for the material nonlinearity of prestressed concrete. The smeared crack approach was incorporated. A bonded or unbonded prestressing bar element is used based on the finite element method, which can represent the interaction between the prestressing bars and concrete of a prestressed concrete member. The proposed numerical method for the evaluation of behavior and strength of prestressed concrete deep beams is verified by comparing its results with reliable experimental results.