• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.81-87
• /
• 2000

A new resonator that is fabricated by single polysilicon layer process is presented. The resonator can move in two orthogonal direction on the plane parallel to the substrate. And the resonant frequencies of the two modes are intrinsically designed to be identical since the overall structure of the resonator is symmetric about the two directions of motion. Since the resonator ideally has two identical vibration mode, it can be applied to various micro-devices that requires multi DOF motion, especially to microgyroscopes. To investigate the feasibility of application of the resonator, dynamic model of the resonator including the nonlinear behavior of driving electrodes is derived and evaluated with the fabricated one, and the self-tuning characteristics are proved though experiments.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.4
• /
• pp.39-46
• /
• 2007

One of well known and much studied nonlinear matrix equations is the matrix polynomial which has the form G(X)=$A_0X^m+A_1X^{m-1}+{\cdots}+A_m$ where $A_0$, $A_1$, ${\cdots}$, $A_m$ and X are $n{\times}n$ real matrices. We show how the minimization methods can be used to solve the matrix polynomial G(X) and give some numerical experiments. We also compare Polak and Ribi$\acute{e}$re version and Fletcher and Reeves version of conjugate gradient method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.321-327
• /
• 1991

Experiments of quenching were made with cylindrical specimens of carbon steel S45C of diameters from 12 to 30mm were performed. The specimens were heated by electric furnace and quenched by immersion method. In order to analyze the temperature profile(cooling curves) of carbon steel including the latent heat of phase transformation, nonlinear heat conduction problem was calculated by the numerical method of inverse heat conduction problem using the apparent heat capacity method. The difference between the calculated and the experimented cooling curves was caused by the latent heat of phase transformation, and the effects of the latent heat were especially manifest at the cooling curves of center of specimens. The temperature and the quantity of the latent heat of phase transformation depend on the cooling speed at A sub(1) transformation point, and the region for cooling speed to become zero was caused by the latent heat of phase transformation.

• Current Optics and Photonics
• /
• v.3 no.5
• /
• pp.390-400
• /
• 2019

Encrypted images obtained through double random phase-encoding (DRPE) occupy considerable storage space. We propose efficient compression schemes to reduce the size of the encrypted data. In the proposed schemes, two state-of-art compression methods of JPEG and JP2K are applied to the quantized encrypted phase images obtained by combining the DRPE algorithm with the virtual photon counting imaging technique. We compute the nonlinear cross-correlation between the registered reference images and the compressed input images to verify the performance of the compression of double random phase-encoded images. We show quantitatively through experiments that considerable compression of the encrypted image data can be achieved while security and authentication factors are completely preserved.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.244-248
• /
• 2012

A series of hybrid rocket combustion experiments were carried out with PMMA/GOx changing diameter and length of the disk installed at pre-chamber. The disk can generate vortex shedding flow and change flow conditions prior to entering the fuel grain which could also alter the combustion characteristics and pressure oscillations. The interaction of vortex shedding in the pre-chamber and small-scale vortices adjacent to burning surfaces by using combustion test.

• Structural Engineering and Mechanics
• /
• v.8 no.2
• /
• pp.137-150
• /
• 1999

This paper presents a numerical study on the flat plates in deep basements, subjected to floor load and in-plane compressive load due to soil and hydraulic lateral pressure. For nonlinear finite element analysis, a computer program addressing material and geometric nonlinearities is developed. The validity of the numerical model is established by comparison with existing experiments performed on plates simply supported on four edges. The flat plates to be studied are designed according to the Direct Design Method in ACI 318-95. Through numerical study on the effects of different load combinations and loading sequence, the load condition that governs the strength of the flat plates is determined. For plates under the governing load condition, parametric studies are performed to investigate the strength variations with reinforcement ratio, aspect ratio, concrete strength, and slenderness ratio. Based on the numerical results, the floor load magnification factor is proposed.

• Structural Engineering and Mechanics
• /
• v.22 no.1
• /
• pp.17-32
• /
• 2006

The application of cellular materials in load-carrying and security-relevant structures requires the exact prediction of their mechanical behavior, which necessitates the development of robust simulation models and techniques based on appropriate experimental procedures. The determination of the yield surface requires experiments under multi-axial stress states because the yield behavior is sensitive to the hydrostatic stress and simple uniaxial tests aim only to determine one single point of the yield surface. Therefore, an experimental technique based on a uniaxial strain test for the description of the influence of the hydrostatic stress on the yield condition in the elastic-plastic transition zone at small strains is proposed and numerically investigated. Furthermore, this experimental technique enables the determination of a second elastic constant, e.g., Poisson's ratio.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.43-48
• /
• 1998

Recently seismic tomography has been widely used to visualize subsurface structure for resource explorations and construction site evaluation. We studied a way to include fresnel zone concept in the conventional ray-based traveltime tomography. The algorithm developed uses the same order of computing time as the conventional traveltime to mography but incorporates the rigorous wavepath concept of wave-equation tomography. Some experiments to synthetic and real data show reasonable results compared to conventional ray-based traveltime tomography.

• Journal of Magnetics
• /
• v.12 no.2
• /
• pp.53-58
• /
• 2007

Theory of the generation linewidth of a current-driven spin-torque magnetic nano-oscillator in the presence of thermal fluctuations has been developed and a simple analytical formula for the generation linewidth in the supercritical regime of generation has been derived. It is shown that the strong dependence of the oscillator frequency on the precession power leads to substantial broadening of the generation linewidth of a spin-torque oscillator compared to the case of a linear oscillator, i.e. an oscillator with power-independent generation frequency. The relation between the nonlinearity-induced broadening of the generation linewidth and the nonlinearity-induced increase of the phase-locking band of a spin-torque oscillator to an external microwave signal has been revealed. The derived expression for the generation linewidth predicts a linewidth minimum when the nano-contact is magnetized at a certain angle to its plane, at which the nonlinear frequency shift vanishes. This result is in good agreement with recent experiments.

• Communications for Statistical Applications and Methods
• /
• v.26 no.3
• /
• pp.239-259
• /
• 2019

The transmuted generalized extreme value (TGEV) distribution was first introduced by Aryal and Tsokos (Nonlinear Analysis: Theory, Methods & Applications, 71, 401-407, 2009) and applied by Nascimento et al. (Hacettepe Journal of Mathematics and Statistics, 45, 1847-1864, 2016). However, they did not give explicit expressions for all the moments, tail behaviour, quantiles, survival and risk functions and order statistics. The TGEV distribution is a more flexible model than the simple GEV distribution to model extreme or rare events because the right tail of the TGEV is heavier than the GEV. In addition the TGEV distribution can adjusted various forms of asymmetry. In this article, explicit expressions for these measures of the TGEV are obtained. The tail behavior and the survival and risk functions were determined for positive gamma, the moments for nonzero gamma and the moment generating function for zero gamma. The performance of the maximum likelihood estimators (MLEs) of the TGEV parameters were tested through a series of Monte Carlo simulation experiments. In addition, the model was used to fit three real data sets related to financial returns.