• Current Optics and Photonics
• /
• 제2권4호
• /
• pp.315-323
• /
• 2018

A new multiple-image encryption scheme that is based on a compressive ghost imaging concept along with a Fourier transform sampling principle has been proposed. This further improves the security of the scheme. The scheme adopts a Fourier transform to sample the original multiple-image information respectively, utilizing the centrosymmetric conjugation property of the spatial spectrum of the images to obtain each Fourier coefficient in the most abundant spatial frequency band. Based on this sampling principle, the multiple images to be encrypted are grouped into a combined image, and then the compressive ghost imaging algorithm is used to improve the security, which reduces the amount of information transmission and improves the information transmission rate. Due to the presence of the compressive sensing algorithm, the scheme improves the accuracy of image reconstruction.

• ALGAE
• /
• 제23권4호
• /
• pp.327-334
• /
• 2008

Seaweed biomass was estimated using a nondestructive sampling method in the rocky intertidal and subtidal zone in Daejin on the mid-east coast of Korea from August 2006 to April 2008. Seasonal sampling were done at the depth of 0, 1, 5, 10 m using 50 x 50 cm quadrat. A total of 95 species, including 11 chlorophytes, 26 phaeophytes, 57 rhodophytes and one sea grass were identified. Mean biomass was comprised of 1,292 g wet wt m$^{-2}$ and the biomass values varied seasonally from 904 g to 1,945 g. Dominant species in biomass were Sargassum spp. (S. horneri, S. yezoense), Corallina pilulifera, Phyllospadix japonica, Symphyocladia latiuscula, Hizikia fusiformis, Codium arabicum and Chondrus ocellatus at Daejin. The vertical distribution of algae were characterized by Corallina pilulifera, Symphyocladia latiuscula, Sargassum spp. (S. confusum, S. yezoense), Hizikia fusiformis and Grateloupia elliptica at intertidal zone, Sargassum spp. (S. fulvellum, S. horneri, S. yezoense), Phyllospadix japonica, Codium arabicum, Undaria pinnatifida and Corallina pilulifera at 1 m depth, Sargassum spp. (S. horneri, S. micracanthum, S. yezoense), Phyllospadix japonica, Grateloupia elliptica, Gelidium amansii and Codium arabicum at 5 m depth and Phyllospadix japonica, Codium arabicum, Sargassum spp. (S. horneri, S. micracanthum, S. yezoense) and Undaria pinnatifida at 10 m depth.

• ALGAE
• /
• 제23권4호
• /
• pp.311-316
• /
• 2008

The seasonal variation of marine algal biomass and community were studied with nondestructive sampling and quadrat method during May 2006 to April 2008 in the intertidal and subtidal zone at Yokjido. As result, total 120 species, 13 Chlorophyta, 34 Phaeophyta, 71 Rhodophyta and 2 Spermatophyta were identified in this study. The major species which contributed significantly to the total biomass were Ulva pertusa, Undaria pinnatifida, Ecklonia stolonifera, Sargassum horneri, S. serratifolium, Gelidium amansii and Prionitis cornea. The mean biomass was 235.5 g wet wt m$^{-2}$ in intertidal, 1,038.9 g wet wt m$^{-2}$ in 1 m, 1,013.1 g wet wt m$^{-2}$ in 5 m, and 19.7 g wet wt m$^{-2}$ in 10 m depths of mean sea level. Seasonal biomass change in intertidal zone, the peak season was in spring, while the lowest was in autumn. The vertical distribution of marine vegetation was characterized by Ulva pertusa - Gelidium divaricatum - Gloiopeltis furcata - Sargassum thunbergii - Hizikia fusiformis at intertidal zone, and Caulerpa okamurae - Gelidium amansii - Chondrus ocellatus - Ecklonia stolonifera - Sargassum horneri - Gracilaria textorii at subtidal zone. These result indicates that the marine algal species and biomass of 1 m and 5 m depths in subtidal zone are greater than intertidal zone, and Ecklonia stolonifera and Sargassum spp. are the dominant species of Yokjido.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.805-809
• /
• 2008

Measurement of leaf area index (LAI) is useful for understanding rice growth, water use, and canopy light interception. The top nitrogen content(TNC) per unit area is an important quantitative index of the condition of nitrogen nutrition in rice production. The rapid and simple method of estimation of TNC, with the use of the existing nondestructive analyzing instruments chlorophyll meter SPAD-502 and plant canopy analyzer (PCA) LAI-2000, was scrutinized. Destructive measurement is time consuming and labor intensive. Our objective was to evaluate sampling procedures using the Li-Cor LI-1800, LAI 2000 plant canopy analyzer (PCA) for nondestructive estimation of rice LAI, and SPAD-502 on the Northern Plains of Cheongju. The LAI estimated by PCA tended to underestimate the LAI determined by actual measurement by about 20%. The estimation of LAI by PCA was judged to have a sufficient accuracy as a practical technique. A high positive correlation was obtained between the values of the SPAD reading and LAI. NDVI and LAI also showed a very high correlation. The values of the SPAD reading and LAI, and NDVI gave a high positive correlation. These results indicated that the method described in this study was effective as a simple and rapid method for the estimation of rice growth.

• 비파괴검사학회지
• /
• 제34권4호
• /
• pp.311-317
• /
• 2014

가압경수로형 원자력발전소 소유자 그룹은 ASME Sec. XI 코드의 배관 샘플링검사법 대안으로 리스크 정보를 활용한 가동중검사 프로그램(RI-ISI)을 개발 및 적용하였다. RI-ISI 프로그램은 파손 메커니즘이 있는 고위험도 배관에 검사를 집중함으로써 발전소의 전반적인 안정성을 향상시켰다. 또한, RI-ISI 프로그램은 비파괴검사 물량, 검사자 방사선 피폭, 검사 시간 등을 줄일 수 있다. 배관 RI-ISI 방법은 한국 표준형 원자력 발전소 3개호기에 적용되고 있으며 다른 발전소도 개발중에 있다. 이 논문에서는 프라마톰형(프랑스형) 원전에 대한 RI-ISI 방법을 연구하고 그 결과를 나타내었다. 프라마톰형 원전에 대한 RI-ISI 적용은 발전소 안전성을 향상시키고 유지시키며 계량화할 수 없는 이익을 준다는 결론에 도달하였다.

• 비파괴검사학회지
• /
• 제36권6호
• /
• pp.504-509
• /
• 2016

원자력발전소의 노후화에 따른 이종금속용접부에서 결함 발생 사례가 지속적으로 보고되고 있으며, 국내에서도 원자력발전소 가동연수 증가에 따라 이종금속부에 결함 발생도 점점 증가할 것으로 판단된다. 국내에서는 증기발생기 배수 노즐 이종금속용접부, 원자로냉각재계통(RCS) 고온관 시료 채취 노즐에서 결함 사례가 보고되었고, 원자력발전소의 인력 접근이 제한적인 고방사선구역 내 소구경 노즐의 이종금속용접부에 대한 검사 시 인력 투입을 최소화 하는 신뢰성 있는 자동화 비파괴검사 가능 기술 및 시스템 개발 필요성이 증대되고 있다. 본 연구에서는 원자력발전소의 소구경 노즐 결함 검출을 위해 1) beam simulation을 통한 최적 검사 탐촉자 설계, 2) 소구경 이종용접부 검사용 multi-directions UT 최적 검사기술, 3) 원격제어 automatic inspection system을 개발하였으며, 표준결함시편을 이용하여 개발된 기술 및 시스템의 결함 검출능을 검증하였다. 개발된 최적기술과 시스템은 실제 발전소에서 발생된 결함 (RCS 고온관 시료 채취 노즐)에 대한 검사에 적용하여 결함을 검출함으로써 개발 검사 기술 및 시스템의 적합성이 검증되었다. 개발된 기술은 원전의 다양한 소구경 건전성 평가에 활용함으로써 원자력발전 안전성 확보에 기여할 수 있을 것으로 기대된다.

• 품질경영학회지
• /
• 제16권2호
• /
• pp.82-91
• /
• 1988

This study is concerned with the development of the economic sampling inspection plan when it is possible to carry out a nondestructive screening inspection for the rejected lots by substitutive characteristics closely related to the original quality characteristic. It is assumed that the probabilities of those errors depend linearly on the fraction defective of the process. The inspection policies considered are as follows: take a random sample of size n from the lot of size N and perform a destructive test on the sample. If the number of the defective items is not greater than a critical number C, accept the lot. Expected cost functions are obtained when the process average can be considered to follow a beta distribution and the way of finding the optimal values of (n, c) is to be explored.

• Bulletin of the Korean Chemical Society
• /
• 제29권7호
• /
• pp.1391-1394
• /
• 2008

Polymer materials are very difficult to decompose for the purpose of chemical analysis. Nondestructive analysis without pretreatment provides a suitable solution that will overcome this obstacle. In this study, CRM candidate samples that contained toxic elements such as As, Cd, Cr and Zn in a polypropylene (PP) were analyzed using instrumental neutron activation analysis (INAA). The analytical results were obtained from ten samples selected by random sampling at two different concentration levels (low and high). Particular attention was paid to reducing analytical errors and evaluating the associated uncertainty.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.9-18
• /
• 2000

This study includes noise automatic inspection system for washing machine auto-transmission one of modern home necessary. We effort to find and certificate sound noise source by sound power and sound intensity, and apply to frequency analysis in vibration related sound noise. still more we have been studying to data acquisition and programming for MS VisualBasic version 5.0. System component is below. 1) Pentium PC or data acquisition. 2) DSO for noise acquisition. 3)S/W for comparison and decision. 4) I/F Board for data communication. Wave form data through the DSO are converting to ASCII code data. The ASCII code through binary converting S/W. Finally we will making noise monitoring system and automatic inspection system.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.672-680
• /
• 2005

There are a lot of reasons to use In-place tests. Construction schedules often require that operations such as form removal, post-tensioning, termination of curing, and removal of reshores be carried out as early as possible. To enable these operations to proceed safely as soon as possible requires the use of reliable in-place tests to estimate the in-place strength. In-place test results are not reliable for engineering judgment. These results should be interpreted and correlated to standard compressive strength, based on the test method. In this paper some of these test procedures and their limitations are discussed. In this study we will go on for Rebound number, Pullout, Ultrasonic pulse velocity, and Cast-in-place cylinder methods which are most useful methods in the Asia.