• Steel and Composite Structures
• /
• v.43 no.6
• /
• pp.759-772
• /
• 2022

Concrete-filled double skinned steel tubular (CFDST) columns have been used to construct modern structures such as tall buildings and bridges as well as infrastructures as they provide better, lesser weight, and greater stiffness in structural performance than conventional reinforced concrete or steel members. Different shapes of CFDST columns may be needed to satisfy the architectural and aesthetic criteria. In the study, three-dimensional FE simulations of circular and elliptical CFDST columns under axial compression were developed and verified through the experimental test data from the perspectives of full load-displacement histories, ultimate axial strengths, and failure modes. The verified FE models were used to investigate and compare the structural performance of CFDST columns with circular and elliptical cross-section shapes by evaluating the overall load-deformation curves, interaction stress-deformation responses, and composite actions of the column. At last, the accuracy of available design models in predicting the ultimate axial strengths of CFST columns were investigated. Research results showed that circular and elliptical CFDST column behaviors were generally similar. The overall structural performance of circular CFDST columns was relatively improved compared to the elliptical CFDST column.

• Steel and Composite Structures
• /
• v.43 no.1
• /
• pp.107-116
• /
• 2022

This paper presents results of numerical studies completed on unreinforced and doubler plate reinforced Elliptical Hollow Section (EHS) T-joints subjected to axial compressive loading on the brace member. Non-linear finite element (FE) models were developed using the finite element code, ABAQUS. Available test data in literature was used to validate the FE models. Subsequently, a parametric study was carried out to investigate the effects of various geometrical parameters of main members and reinforcement plates on the ultimate capacity of reinforced EHS T-joints. The parametric study found that the reinforcing plate significantly increases the ultimate capacity of EHS T-joints up to twice the capacity of the corresponding unreinforced joint. The thickness and length of the reinforcing plate have a positive effect on the ultimate capacity of Type 1 joints. This study, however, found that the capacity of Type 1 orientation is not dependent on the brace-to-chord diameter ratio. As for type 2 orientations, the thickness and length of the reinforcement have a minimal effect on the ultimate capacity. A new design method is introduced to predict the capacity of the reinforced EHS T-joints Type 1 and 2 based on the multiple linear regression analyses.

• Applied Microscopy
• /
• v.50
• /
• pp.18.1-18.7
• /
• 2020

The olfactory anatomy and histology of Lethenteron reissneri were researched using a stereo microscope, a light microscope, and a scanning electron microscope. As in other lampreys, it shows same characters as follows: i) a single olfactory organ, ii) a single tubular nostril, iii) a single olfactory chamber with gourd-like form, iv) a nasal valve, v) a nasopharyngeal pouch, vi) a sensory epithelium (SE) of continuous distribution, vii) a supporting cells with numerous long cilia, viii) an accessory olfactory organ. However, the description of a pseudostratified columnar layer in the SE and Non SE is a first record, not reported in sea lamprey Petromyzon marinus. In particular, both 19 to 20 lamellae in number and olfactory receptor neuron's quarter ciliary length of the knob diameter differ from those of P. marinus. From these results, it might be considered that the olfactory organ of L. reissneri shows well adaptive structure of a primitive fish to slow flowing water with gravel, pebbles, and sand and a hiding habit into sand bottom at daytime. The lamellar number and neuron's ciliary length may be a meaningful taxonomic character for the class Petromyzonida.

• Steel and Composite Structures
• /
• v.53 no.1
• /
• pp.45-59
• /
• 2024

This paper aims to investigate the impact of interfacial debonding on modal dynamic properties such as frequencies and vibration mode shapes. Furthermore, it seeks to identify the specific locations of debonding in rectangular concrete-filled steel tubular (CFST) columns during the subsequent stage of the study. In this study, debonding is defined as a reduction in the elasticity modulus of concrete by a depth of 3 mm at the connection point with the steel tube. Debonding leads to a lack of correlation between primary and secondary shapes of vibration modes and causes a reduction in the natural frequency in all modes. However, directly comparing changes in vibration responses does not allow for the identification of debonding locations. In this study, a novel irregularity detection index (IDI) is proposed based on modal signal processing via the 2D wavelet transform. The suggested index effectively reveals relative irregularity peaks in the form of elevations at the debonding locations. As the severity of damage increases at a specific debonding location, the relative irregularity peaks would increase only at that specific point; in other words, the detection or non-detection of a debonding location using IDI has minimal effects on the identification of other debonding locations.

• Journal of Veterinary Clinics
• /
• v.33 no.3
• /
• pp.165-167
• /
• 2016

A case of rectal prolapses in a one-year-old intact male mixed-breed dog, weighing 6.8 kg was presented with one-week history of protruded tubular pink mass through the anus along with mucosal necrosis. The prolapse was non-reducible, so rectal amputation and anal purse-string suture was performed. Prolapse recurred 9 days after the surgery, purse-string suture and conservative treatment were attempted with no-good results. Laparoscopic-assisted incisional colopexy technique was applied to treat the recurrent rectal prolapse, but failed 6 days after surgery. This was followed by non-incisional colopexy technique, which prevented recurrence during the 3 months of follow-up period. Despite the episode of recurrence, the laparoscopic-assisted colopexy technique treated rectal prolapse successfully. This is the first report in Korea, which describes laparoscopic-assisted colopexy in the dog.

• Journal of Biomedical Engineering Research
• /
• v.44 no.1
• /
• pp.85-91
• /
• 2023

Stress urinary incontinence (SUI) occurs when abdominal pressure increases, such as sneezing, exercising, and laughing. Surgical and non-surgical treatments are the common methods of SUI treatment; however, the conventional treatments still require continuous and invasive treatment. Laser have been used to treat SUI, but excessive temperature increase often causes thermal burn on urethra tissue. Therefore, the optimal conditions must be considered to minimize the thermal damage for the laser treatment. The current study investigated the feasibility of the laser irradiation condition for SUI treatment using non-ablative 980 nm laser from a safety perspective through numerical simulations. COMSOL Multiphysics was used to analyze the numerical simulation model. The Pennes bioheat equation with the Beer's law was used to confirm spatio-temporal temperature distributions, and Arrhenius equation defined the thermal damage caused by the laser-induced heat. Ex vivo porcine urethral tissue was tested to validate the extent of both temperature distribution and thermal damage. The temperature distribution was symmetrical and uniformly observed in the urethra tissue. A muscle layer had a higher temperature (28.3 ℃) than mucosal (23.4 ℃) and submucosal layers (25.5 ℃). MT staining revealed no heat-induced collagen and muscle damage. Both control and treated groups showed the equivalent thickness and area of the urethral mucosal layer. Therefore, the proposed numerical simulation can predict the appropriate irradiation condition (20 W for 15 s) for the SUI treatment with minimal temperature-induced tissue.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.3
• /
• pp.211-218
• /
• 2019

Herniation of the intervertebral disc is a medical disease manifesting as a bulging out of the nucleus pulposus or annulus fibrosis beyond the normal position. Most lumbar disc herniation cases have a favorable natural course. On the other hand, surgical intervention is reserved for patients with severe neurological symptoms or signs, progressive neurological symptoms, cauda equina syndrome, and those who are non-responsive to conservative treatment. Numerous surgical methods have been introduced, ranging from conventional open, microscope assisted, tubular retractor assisted, and endoscopic surgery. Among them, microscopic discectomy is currently the standard method. Biportal endoscopic spinal surgery (BESS) has several merits over other surgical techniques, including separate and free handling of endoscopy and surgical instruments, wide view of the surgical field with small skin incisions, absence of the procedure of removing fog from the endoscope, and lower infection rate by continuous saline irrigation. In addition, existing arthroscopic instruments for the extremities and conventional spinal instruments can be used for this technique and surgery for recurred disc herniation is applicable because delicate surgical procedures are performed under a brightness of 2,700 to 6,700 lux and a magnification of 28 to 35 times. Therefore, due to such advantages, BESS is a novel technique for the surgical treatment of lumbar disc herniation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.6013-6017
• /
• 2013

Background: To evaluate the clinicopathologic and demographic characteristics of triple-negative breast cancer (TNBC) patients and to determine differences from non-triple-negative cases. Materials and Methods: A detailed review of the medical records of 882 breast cancer (BC) patients was conducted to obtain information regarding age, menopausal status, height and weight at the time of diagnosis, presence of diabetes or hypertension, and pathologic characteristics of the tumor (tumor size, lymph node status, histologic grade, ER status, PR status, HER2 status, p53 mutation). Body mass index (BMI) was calculated and a value of ${\geq}30$ was considered as indicative of obesity. Results: 14.9% (n=132) of the patients had TNBC. There was no difference among the patients in terms of median age, comorbid conditions and menopausal status. The proportion of medullary, tubular and mucinous carcinomas was significantly higher (15.9%) in the triple-negative (TN) group, while invasive lobular histology was more frequent (8.2%) among non-triple negative (NTN) cases (p<0.001). Grade 3 (G3) tumors were more frequent in the triple-negative group (p<0.001). The rate of p53 mutation was 44.3% in TN tumors versus 28.2% in the NTN group (p<0.001). The two groups were similar in terms of LN metastasis. In the NTN group, the rate of patients with BMI ${\geq}30$ was 53% among postmenopausal patients, while it was 36% among premenopausal women, and the difference was statistically significant (p<0.001). No significant difference was observed in terms of BMI between postmenopausal and premenopausal patients in the TN group (p=0.08). Conclusions: TNBC rates and clinicopathologic characteristics of the Turkish patient population were consistent with the data from Europe and America. However, no relationship between obesity and TNBC was observed in our study. The association between TNBC and obesity needs to be evaluated in a larger patient population.

• Steel and Composite Structures
• /
• v.19 no.1
• /
• pp.21-41
• /
• 2015

Push-out tests have been conducted on 18 rectangular concrete-filled steel tubular (CFST) columns with the aim of studying the bond behaviour between the steel tube and the concrete infill. The obtained load-slip response and the distribution of the interface bond stress along the member length and around the cross-section for various load levels, as derived from measured axial strain gradients in the steel tube, are reported. Concrete compressive strength, interface length, cross-sectional dimensions and different interface conditions were varied to assess their effect on the ultimate bond stress. The test results indicate that lubricating the steel-concrete interface always had a significant adverse effect on the interface bond strength. Among the other variables considered, concrete compressive strength and cross-section size were found to have a pronounced effect on the bond strength of non-lubricated specimens for the range of cross-section geometries considered, which is not reflected in the European structural design code for composite structures, EN 1994-1-1 (2004). Finally, based on nonlinear regression of the test data generated in the present study, supplemented by additional data obtained from the literature, an empirical equation has been proposed for predicting the average ultimate bond strength for SHS and RHS filled with normal strength concrete.

• Childhood Kidney Diseases
• /
• v.16 no.1
• /
• pp.21-31
• /
• 2012

Focal segmental glomerulosclerosis (FSGS) is the name of the primary glomerular disease as well as the terminology to describe the secondary phenomena of any other glomerular diseases. It is characterized by sclerosis, hyalinosis, foam cell infiltration, vacuolar change of podocytes, and halo formation in the glomerulus. Throughout the interstitium, lymphocytes infiltration, tubular atrophy and vascular changes are accompanied. Occasionally, IgM and/or C3 depositions are noted in the sclerotic areas. Electron microscopically, diffuse effacement of foot processes are seen in non-sclerotic area like minimal change disease. Podocyte injury patterns including vacuolar changes are frequently examined. Recently, Columbia group has suggested morphologic classification of FSGS and they demonstrated very good prognosis of tip lesion and poor prognosis of both collapsing and cellular types. However, the pathogenetic classification has been suggested by others; hyperfilteration, podocyte injury, genetic lesions etc. Further studies are necessary to understand and treat this disease.