• Development and Reproduction
• /
• v.8 no.1
• /
• pp.1-9
• /
• 2004

The potential importance of proteomic approaches has been clearly demonstrated in other fields of human medical research, including liver and heart disease and certain forms of cancer. However, reproductive researches have been applied to proteomics poorly. Proteomics can be defined as the systematic analysis of proteins for their identity, quantity, and function. It could increase the predictability of early drug development and identify non-invasive biomarkers of toxicity or efficacy. Proteome analysis is most commonly accomplished by the combination of two-dimensional gel electrophoresis(2DE) and MALDI-TOF(matrix-assisted laser desorption ionization-time of flight) MS(mass spectrometry) or protein chip array and SELDI-TOF(surface-enhanced laser desorption ionization-time of flight) MS. In addition understanding the possessing knowledge of the developing biomarkers used to assess reproductive biology will also be essential components relevant to the topic of reproduction. The continued integration of proteomic and genomic data will have a fundamental impact on our understanding of the normal functioning of cells and organisms and will give insights into complex cellular processes and disease and provides new opportunities for the development of diagnostics and therapeutics. The challenge to researchers in the field of reproduction is to harness this new technology as well as others that are available to a greater extent than at present as they have considerable potential to greatly improve our understanding of the molecular aspects of reproduction both in health and disease.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.384-388
• /
• 2001

The selenium (Se) contents of 20 herbs, harvested in three areas in Korea, were analyzed. Many herbs had no Se. Angelica ($138.4{\mu}g \;Se{\cdot}kg^{-1}$ FW), caraway ($167.8{\mu}g \;Se{\cdot}kg^{-1}$ FW), chamomile ($116.6{\mu}g \;Se{\cdot}kg^{-1}$ FW), marjoram (158.7 and $132.6{\mu}g\;Se{\cdot}kg^{-1}$ FW), and oregano ($62.5{\mu}g\;Se{\cdot}kg^{-1}$ FW) accumulated Se as higher concentration compared with other plants. The Se content of herbs was dependent on the species, cultivars and areas. The status of Se uptake by herbs was investigated according to Se concentrations in hydroponics. During four weeks, before harvest of several herbs in greenhouse, sodium selenate ($Na_2SeO_4$) was added to the nutrient solution at concentrations of 2, 4, 6, and $8mg{\cdot}L^{-1}$. Field-mint accumulated Se too high, but external symptom of Se toxicity was not found. Essential oil content was generally proportionated to treated-Se concentration. The essential oil contents in basil and balm increased two to three times higher by sodium selenate treatment compared to non-treatment, but they did not show any linear relationship between essential oil contents and treated-Se concentration.

• Journal of Biomedical Engineering Research
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2017

Chemotherapy, radiation therapy, and surgery are major methods to treat cancer. However, current cancer treatments report severe side effects and high recurrences. Recent studies about engineering nanoparticles as a drug carrier suggest possibilities in terms of specific targeting and spatiotemporal release of drugs. While many nanoparticles demonstrate lower toxicity and better targeting results than free drugs, they still need to improve their performance dramatically in terms of targeting accuracy, immune responses, and non-specific accumulation at organs. One possible way to overcome the challenges is to make precisely controlled nanoparticles with respect to size, shape, surface properties, and mechanical stiffness. Here, we demonstrate $500{\times}200nm$ discoidal polymeric nanoconstructs (DPNs) as a drug delivery carrier. DPNs were prepared by using a top-down fabrication method that we previously reported to control shape as well as size. Moreover, DPNs have multiple payloads, poly lactic-co-glycolic acid (PLGA), polyethylene glycol (PEG), lipid-Rhodamine B dye (RhB) and Salinomycin. In this study, we demonstrated a potential of DPNs as a drug carrier to treat cancer.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2909-2912
• /
• 2012

Aim: To evaluate efficacy and tolerability of topotecan treatment for recurrent small cell lung carcinoma. Patients and Methods: A total of 62 patients were evaluated retrospectively. Statistical analysis was performed using GraphPad Instat (version 3.05). Results: DFifty five of patients (89%) were male and 7 (11%) were female. Median age was $56.7{\pm}9.3$ (34-75). Forty eight of patients (80%) were extensive stage (ES) at the time of diagnosis. Fifty of the patients (80.6 Medical Oncology Clinic) were given median 5.36 cycles of cisplatin-etoposide (2-8 cycles). Time to recurrence was $15.6{\pm}6.13$ weeks in patients with limited stage (LS) and $6.3{\pm}3.82$ weeks in extensive stage (ES) (p<0.0001). Overall survival was $14.0{\pm}6.08$ months in ES and $17.9{\pm}6.88$ months in LS. The difference between two groups was statistically meaningful (p=0.0447). The overall survival of the patients was $14.8{\pm}6.43$ months (4.5-40 months). In terms of survival, there was no difference between males and females (p=0.1171). In 17 (27%) patients who were refractory to topotecan or in whom progression occurred other chemotherapies were used. Conclusion: Small cell lung cancer is chemosensitive, but recurrences occur in short time. Other chemotherapy regimens are used in progression. Topotecan is one of them. Patients who were young and in whom recurrences occur late had given better response to topotecan. Because of the retrospective nature of the study, we couldn't reach the records exactly and consequently, rate and duration of response couldn't be calculated. In recurrent SCLC topotecan is one of the treatment choices. But both hematological and non hematological side effects should be taken into consideration.

• The Korean Journal of Ecology
• /
• v.22 no.3
• /
• pp.131-137
• /
• 1999

This study was carried out to investigate the activity of nitrogen fixation and accumulation of heavy metal and inorganic matter in Vicia amoena community at lower region in Kumho riverside, including Youngchon, Chimsangyo, Paldalgyo, Talseochon and Kumhogyo. The contents of inorganic matter and heavy metal of Kumho riverside soil increased in the down stream in each organ of the plant growing in the riverside. Generally, V. amoena community showed rapid growth of shoot and high value of Top/Root ratio. V. amoena community showed higher water content of shoot at late growth stage and higher chlorophyll content. The root nodule of V. amoena community appeared in April and increased by 0.30, 0.27, 0.24, 0.06 and 0.14 g/plant, and nitrogen fixation activity of nodule attained 20.1, 16.8, 15.4, 8.5 and 5.3 μmol·C₂H₄·g fw nodule/sup -1/·h/sup -1/ for non-contaminated area Youngchon, Chimsangyo, Paldalgyo, Talseochon and Kumhogyo, respectively, in June:. Nodule formation and nitrogen fixation activity were reduced in the down stream by the soil contamination and heavy metal accumulation and showed minimum values. at Talseochon and Paldalgyo. V. amoena showed growth adaptation against heavy metal toxicity by restricting heavy metal such as Pb, Cu, Zn, Fe from transport, and by accumulating high Ca ion in shoot, nitrogen and phosphorus in root at late growth stage than those at early one, respectively, but total heavy metal per plant showed higher values in shoot than those in root by high T/R ratio of plant growth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.526-536
• /
• 2006

Statement of problem : Use of fiber composite technology as well as development of nonmetal implant prosthesis solved many problems due to metal alloy substructure such as corrosion. toxicity, difficult casting, expensiveness and esthetic limit. After clinical and laboratory test, we could find out that fiber-reinforced composite prostheses have good mechanical properties and FRC can make metal-free implant prostheses successful. Purpose : The purpose of this study is to evaluate the flexural strength of implant fixed prosthesis using fiber reinforced composite. Material and methods : 2-implant fixture were placed in second premolar and second molar area in edentulous mandibular model, and their abutments were placed, and bridge prostheses using gold, PFG, Tescera, and Targis Vectris were fabricated. Tescera was made in 5 different designs with different supplements. Group I was composed by 3 bars with diameter 1.0mm and 5 meshes, 2 bars and 5 meshes for Group II, 1 bar and 5 meshes for Group III, and only 5 meshes were used for Group IV. And Group V is composed by only 3 bars. Resin (Tescera) facing was made to buccal part of pontic of gold bridge. All of gold and PFG bridges were made on one model, 5 Targis Vectris bridges were also made on one model, and 25 Tescera bridges were. made on 3 models. Each bridge was attached to the test model by temporary cement and shallow depression was formed near central fossa of the bridge pontic to let 5 mm metal ball not move. Flexual strength was marked in graph by INSTRON. Results : The results of the study are as follows. The initial crack strength was the highest on PFG. and in order of gold bridge Tescera I, Tescera II, Targis vectris, Tescera IV, Tescera III, and Tescera V. The maximum strength was the highest on gold bridge, and in order of PFG, Tescera I, Tescera IV Tescera II, Targis vectris, Tescera III, and Tescera V. Conculsions : The following conclusions were drawn from the results of this study. 1. Flextural strength of implant prosthesis using fiber reinforced composite was higher than average posterior occlusal force. 2. In initial crack strength, Tescera I was stronger than Tescera V, and weaker than PFG. 3. Kinds and number of auxillary components had an effect on maximum strength, and maximum strength was increased as number of auxillary components increased. 4 Maximum strength of Tescera I was higher than Targis vectris, and lower than PFG.

• Research in Plant Disease
• /
• v.20 no.2
• /
• pp.79-86
• /
• 2014

In order to seek more eco-friend, economic and safer quarantine method than current methyl bromide fumigation, the convergent treatment with 200 Gy of gamma irradiation and several chemicals such as nano-siver particles (NSS), sodium dichloroisocyanurate (NaDCC) was tried on the cuttings of lily in the packing of catonnage box for export. With 6 independent experiments of gamma irradiation on the three lily cultivars, cvs. Siberia, Le reve and Sorbonne, incidence and severity of lily leaf blight was investigated on leaves and petals at 8-d after infection. 200 Gy of gamma irradiation decreased at 13-25% of severity on the leaf of Sorbonne, but it increased at 2-5% of severity on the leaf of Siberia and Le reve. Chemical substitutes such as NSS and NaDCC were not effective to control of lily blight on cuttings. By 200 Gy of gamma irradiation treatment, chlorophyll contents were statistically significantly decreased at 12-d after irradiation and the longevities vaselife of fully open flower of Siberia and Sorbonne were increased at 0.4 to 1.2 days. In addition, the relative fresh weights of the gamma irradiated cuttings were severely dried compared to the non-irradiated control. On the other hands, the symptoms of phyto-toxicity of high dose gamma irradiation at 1 or 2 kGy on cv. Siberia were to be blight at the tip of bloom, bent necks of flower, and delayed the process of flowering.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.490-499
• /
• 2016

In this study, the marine ecological impacts of dephosphorized slag and steel slag on the initial life cycle of the rotifer Brachionus plicatilis and benthic copepod Tigriopus japonicus (in marine trophic structure as a first consumer) exposure to slag extracts have been considered using a marine ecotoxicological assessment. In the results of a screen test on slag extracts, the pH of an undiluted solution was measured to have high alkalinity (pH 8.89-12.16), but a toxic reaction to this undiluted solution before and after aging was divided according to test species. For non-aged slag, the toxic effect ($LC_{50}$) of neonate on B. plicatilis was seen to be severe with dephosphorized slag (20.8 %) than steel slag (63.8 %) with under pH-uncontrolled conditions. The toxic values of dephosphorized and steel slag were estimated to be 35.3 % and 36.0%, respectively, for nauplius with T. japonicus. However, the toxicity of slag extracts before and after aging were different for T. japonicus than for B. plicatilis based on the characteristics of the test materials, with pH-controlled conditions. In conclusion, the results of this study suggest that slag can be relatively stable after aging and may not be likely to influence marine environments, even given repetitive extracting under pH-uncontrolled conditions. This study confirms that a marine ecotoxicological assessment method applied to mechanically activated samples can give an idea of the resistance a marine environment has against the introduction of hazardous materials due to precipitation and weathering.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.4 no.1
• /
• pp.44-47
• /
• 2006

Symptoms of aspirin overdose may vary from acid-base disturbance, electrolyte abnormality, non-cardiogenic pulmonary edema, chemical hepatitis, seizure to cardiac toxicity. Cardiac adverse effects from aspirin are uncommon but there are reports of arrhythmia, cardiopulmonary arrest, and myocardial infarction. We report 2 cases of young women with aspirin overdose who exhibited ischemic changes on their ECGs a few hours after the ingestion with spontaneous recovery in a few days. First case, a 29 year old woman, presented to the emergency department 6 hours after ingesting 250 tablets of aspirin (325 mg/T). On examination, the temperature was $36.3^{\circ}C$: blood pressure, 105/72mmHg; Pulse, 111/min and respiratory rate, 24/min. Second case, a 27 year old woman, an hour after ingesting 60 tablets (325mg/T). On examination, the temperature was $36.0^{\circ}C$: blood pressure, 102/72 mmHg; pulse, 89/min and respiratory rate, 25/min. In both cases, ECG after 6 hours of ingestion had sinus tachycardia and developed T wave inversion on the anterior leads in the following ECGs. Their initial serum salicylate levels after 6 hours of ingestion were 71.2 mg/dL and 28.4 mg/dL respectively. These salicylate levels were resolving when these ECGs were observed. The ECG changes resolved in the following days and they were discharged without any further symptoms. Further studies are needed, but for the time being, when dealing with salicylate overdose, transient cardiac depression should be kept in mind to avoid adverse ischemic cardiac events.

• Journal of Environmental Impact Assessment
• /
• v.24 no.6
• /
• pp.549-560
• /
• 2015

The priorities of siting restriction was derived from quantification of environmental hazard according to industrial classification based on 'Chemical Ranking and Scoring System(CRS)' which is handling the discharge characteristics of 31 industrial classifications regulated from locating at 'Industrial Complex in Rural Area(ICRA)'. CRS that is utilizing the data of 'Pollutant Release and Transfer Registers(PRTR)' is applied to determine human health risk and ecological risk which are calculated by discharged amount and materials $LC_{50}$ according to water, soil and air media based on industrial classification. From this process, exposure assessment and toxicity assessment for integrating the adverse environmental impact and the mitigation effect of environmental risk according to the development of environmental technologies into establishing the rational landuse management method for the 31 industrial classifications regulated from locating at ICRA was analyzed. From the assessment result of the siting restriction removal at ICRA for 31 industrial classifications, based on 2012 year reference 6 industries that includes Manufacture of Guilt Coloration Surface Processing Steel Materials, Manufacture of Biological Product, Manufacture of Smelting Refining and Alloys of Copper, Dyeing and Finishing of Fibers and Yarns, Manufacture of Other Basic Iron and Steel n.e.c., Rolling Drawing and Extruding of Non-ferrous Metals n.e.c. are calculated as having relatively lower environmental hazards, thus it is judged that the siting restriction mitigation at ICRA is possible for the 6 industrial classifications that are not discharging the specific hazardous water contaminants during manufacturing process.