• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.4
• /
• pp.7-15
• /
• 2019

Purpose: The purpose of this study is to identify the current status and use of Gyungrodang located in Heungeop-myeon, Wonju-si and to present improvement and implication for community care in rural area. Methods: The survey of the current status was conducted with interview and observations. The use status of Gyungrodang was surveyed for the elderly over 65 years old who live in Heungeop-myeon using questionnaire. A face-to-face interview was conducted to complete a questionnaire and 181 samples were collected for the study. Results: In the current status, some of the Gyungrodang did not operate during farming season. The external environment, in terms of accessibility, 74.2% of Gyungrodang were located more than 60 minutes on foot from community center, health post, and pharmacy. In addition, the interval between buses run minimum 15 minutes to 120 minutes on average. The internal structure, 35.7% was divided room and toilets. In the use status, the reason for non-use of the Gyungrodang was discomfort(29.0%), and the reason for using was because friends go to the Gyungrodang(44.6%). The most satisfying program was te health care program(65.6%). Implications: First, it is necessary to develop and operate customized health promotion program for target population and seasons. Second, it is necessary to make a plan focused on consumers' needs through satisfaction and demand survey. Third, it is necessary to divide the space of each Gyungrodang by gender when planning the expansion or new construction of Gyungrodang.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.259-266
• /
• 2011

We present a new dual sequential approximate optimization (SAO) algorithm called SD-TDQAO (sequential dual two-point diagonal quadratic approximate optimization). This algorithm solves engineering optimization problems with a nonlinear objective and nonlinear inequality constraints. The two-point diagonal quadratic approximation (TDQA) was originally non-convex and inseparable quadratic approximation in the primal design variable space. To use the dual method, SD-TDQAO uses diagonal quadratic explicit separable approximation; this can easily ensure convexity and separability. An important feature is that the second-derivative terms of the quadratic approximation are approximated by TDQA, which uses only information on the function and the derivative values at two consecutive iteration points. The algorithm will be illustrated using mathematical and topological test problems, and its performance will be compared with that of the MMA algorithm.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.829-831
• /
• 2009

폐기물, 석탄 등 다양한 시료의 가스화 반응을 통해서 발생되는 합성가스는 CO, $H_2$, $CO_2$가 주성분으로 가스엔진, 가스터빈 등의 연료로 사용하여 발전하거나 합성반응을 통해 다양한 화학원료로의 전환이 가능하다. 또한 폐기물, 석탄 등의 다양한 원료의 가스화 반응에 의해 발생한 합성가스로부터 F-T(Fischer-Tropsch) 합성을 통한 인조합성석유, Non F-T 합성을 통한 메탄올, DME(Dimethyl Ether) 등을 제조할 수 있으며, 메탄화 반응을 통해 대체천연가스(SNG, Substitute Natural Gas)로 제조하여 활용하는 방안도 가능하다. 또한 현재 상업용 규모의 수소 제조 방법 중에서 가장 경제적인 방법으로 천연가스를 개질하여 CO, $H_2$가 주성분인 합성가스를 만든 다음 수성가스 전환, PSA(Pressure Swing Adsorption)통해 $CO_2$와 $H_2$를 분리하여 생산하고 있으나, 천연가스 가격의 상승 및 다양한 시료로부터 향후 경제성 확보가 가능한 수소 제조 방법에 대한 연구가 진행되고 있으며, 석탄 가스화 및 폐기물 가스화를 통해 얻어진 합성가스로부터의 수소 제조 공정이 개발 및 상업화 추진되고 있다. 본 연구에서는 폐기물 가스화를 통해 발생한 합성가스에 대하여 수성가스 전환 반응을 통한 수소 생산 특성 및 수성가스 전환 반응의 공간속도 변화 및 스팀주입량 변화에 따른 반응 특성을 고찰하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.859-865
• /
• 2007

This paper presents a method to analyze the unbalance response of a high speed polygon mirror scanner motor supported by sintered bearing and flexible supporting structures by using the finite element method and the mode superposition method. The appropriate finite element equations for polygon mirror are described by rotating annular sector element using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. The rotating components except for the polygon mirror are modeled by Timoshenko beam element including the gyroscopic effect. The flexible supporting structures are modeled by using a 4-node tetrahedron element and 4-node shell element with rotational degrees of freedom. Finite element equations of each component of the polygon mirror scanner motor and the flexible supporting structures are consistently derived by satisfying the geometric compatibility in the internal boundary between each component. The rigid link constraints are also imposed at the interface area between sleeve and sintered bearing to describe the physical motion at this interface. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem by using the restarted Arnoldi iteration method. Unbalance responses in time and frequency domain are performed by superposing the eigenvalues and eigenvectors from the free vibration analysis. The validity of the proposed method is verified by comparing the simulated unbalance response with the experimental results. This research also shows that the flexibility of supporting structures plays an important role in determining the unbalance response of the polygon mirror scanner motor.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.1
• /
• pp.33-44
• /
• 2003

The atmospheric concentrations of particulate polycyclic aromatic hydrocarbons (PAHs) associated with PM$_{10}$ were determined in Taegu metropolitan area. Sampling was undertaken every five days throughout one year period from 1993 to 1994 at four sites, representing a residential, a commercial, an industrial, and a sub-urban area, respectively. Benzo (e) pyrene, benzo (k) fluoranthene, and chrysene were found to be the most abundant com-pounds during the study period. The concentrations of benzo (a) pyrene, one of carcinogenic PAHs, ranged 2.0~4.8 ng/㎥ in winter and 0.5~1.5 ng/㎥ in summer season, indicating a marked seasonal variation. It was found that there were very similar patterns in the relative profiles of PM$_{10}$-bound PAH concentrations among the four sampling sites, while the absolute levels of each PAH were significantly different from each site. In addition, the patterns of summer to winter concentration ratios for each PAH were almost identical between the different sites. Despite difficulties due to the lack of good markers for specific sources in the target compounds, we were able to evaluate and describe the effects of vehicle emissions and space heatings, using relative profiles of PAHs, winter to summer (W/S) ratios, PAH-to-PAH ratios, and the result of principal component analysis. As a con-sequence, it was concluded that the vehicle emissions in urban and sub -urban areas are likely to be a major contributor for PAH loadings in the ambient atmosphere during the non-heating season, while the contributions of residential heating and local industrial oil burning emissions were highly significant in heating season.son.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1123-1128
• /
• 2009

Noise radiated from medical treatment at dental clinic will affect the patients. On such point of view, We investigated the noise characteristics in case of medical treatment (scaling, tooth eliminating) and non-medical examination (idling) and also evaluated the degree of indoor noise using the evaluation index such as PSIL, NRN and made up a questionnaire about the reactions to noise. As a result of noise evaluation, it shows that the range of noise level is 67.7~78.3 dB(A) and frequency is very high (above 4 k Hz) and respondents are affected by noise (unpleasantness, hesitation to visit dental clinic, shivering with noise, being astonishment). Analysis by PSIL showed that it was no problem to conversation between worker and patient. But it exceeded the noise permit level in working space by NR-curve. To relieve a fear of noise in patients, they are considered to offer the ear protection, choose the low noisevibration equipment and use the masking effect. They are of great advantage to dental clinics to i prove dental service and competitiveness.

• The Korean Journal of Pain
• /
• v.18 no.2
• /
• pp.240-245
• /
• 2005

Herein is described the successful treatment of complex regional pain syndrome type II with the combination treatment of spinal cord stimulation and radiofrequency thermocoagulation of the lumbar sympathetic ganglion. A 62 years old male patient, suffering from CRPS type II in his left lower extremity, visited our pain clinic. Medication and nerve blockade produced only slight improvement in his symptoms and signs. Therefore, a linear type spinal cord simulator was inserted into the thoracic epidural space, using a non-surgical percutaneous approach, with the cephalad lead located at the T11 level. Two months later, the repositioning of the electrode to the T12 level for more effective pain control, with radiofrequency thermocoagulation of lumbar sympathetic ganglion also performed at the left L2 and 3 levels for the control of trophic change. These resulted in significant pain relief and decreased trophic change, with no complications, after which the patient was able to resume a normal life.

• Korean Institute of Interior Design Journal
• /
• v.23 no.3
• /
• pp.153-163
• /
• 2014

The eco-friendly elements are important for new construction and renovation and redevelopment of the buildings. The green buildings are related with minimizing environmental pollution and how to live with nature throughout the entire process of demolishing and building. The purpose of this paper is to study on eco-friendly business buildings in the trend of mandatory green building certification system. The analysis of this paper is comparative studies on practices at eleven domestic eco-friendly business buildings through site survey on design framework of green buildings. The design framework of eleven this buildings is six kinds of skills on technical, renewable, ecological, cultural, healthy, social. The eleven this buildings in the new & renewable energy and IT technology of technical sector are satisfied with the framework. But, domestic most advanced eco-friendly business buildings are placed difference between almost the two times on the lower buildings at comparative evaluation. The three of this buildings are gratified rainwater harvesting and waste recycling systems for renewable and recycle. The buildings have an excellent aspects of technology and ecology. The benefits of this buildings are related with future compulsory zero energy house to take technical advantage of renewable energy. However, the buildings reflecting the regional culture types is insufficient. The buildings should be supplemented as follows. This buildings are need to have the social enhancement programs and design for convenient space of community residents, through health and comfort of on workplace. Moreover, this buildings have features of coexisting with human beings and nature friendly with the aim of realizing the sustainable development. The social enhancement programs through regional cultural aspects with ecology are related with individual and community livings in harmony, non-hierarchical communal lifes. The development of the cultural aspects provide for consensus about the local community and creating sustainable communities. Thus, The buildings are to have energy saving, pleasant and healthy living environment and interactive individual and community livings in harmony.

• The Journal of the Korean life insurance medical association
• /
• v.27 no.2
• /
• pp.96-106
• /
• 2008

Herniate disc disease is one of the biggest problem in claim of insurance as well as in medical. Herniate disc disease have recently increased, and it is ranked 8th in claim reasons recently. As an underwriter and physical therapist, I want to study interrelationship of insurance and disc disease. I think it is necessary to know about knowledge of medical, so this study is given some space to structure of spine, cause of herniated disc disease, role of disc, methods of classification of disable (McBride method and AMA method), and spine disability stage. disc surgery is divided laparoscope disc surgery and spine surgery. I analysis it some factors- gender, age, occupation, re-surgery, and state of after surgery - through searching medical papers. I suggest below conclusion to underwriter because it can be useful to make questionnaire, and underwriter can expect prognosis. conclusion The negative factors of disc surgery (compare to other cases) were as follows: 1. endoscope disc surgery: $20{\sim}40year$ old man, hospitalization period more than 5 days. 2. spine surgery: $45{\sim}70year$ old woman, hospitalization period more than 15 days. 3. re-surgery experience: exist 4. working condition: a person who draws a small income, non-regular worker, working period is less than 1 year. 5. method of surgery: pedicle screw fixation. spine fusion surgery, artificial disc surgery. 6. post surgery condition: appearance of muscle weakness, paralysis, reference pain, lordosis, kyphosis, and complication. smoker or take a drink.

• Structural Engineering and Mechanics
• /
• v.75 no.4
• /
• pp.425-434
• /
• 2020

Practical non-synoptic fluctuating wind often exhibits nonstationary features and should be modeled as nonstationary random processes. Generally, the coherence function of the fluctuating wind field has time-varying characteristics. Some studies have shown that there is a big difference between the fluctuating wind field of the coherent function model with and without time variability. Therefore, it is of significance to simulate nonstationary fluctuating wind field with time-varying coherent function. However, current studies on the numerical simulation of nonstationary fluctuating wind field with time-varying coherence are very limited, and the proposed approaches are usually based on the traditional spectral representation method with low simulation efficiency. Especially, for the simulation of multi-variable wind field of large span structures such as transmission tower-line, not only the simulation is inefficient but also the matrix decomposition may have singularity problem. In this paper, it is proposed to conduct the numerical simulation of nonstationary fluctuating wind field in one-spatial dimension with time-varying coherence based on the wavenumber-frequency spectrum. The simulated multivariable nonstationary wind field with time-varying coherence is transformed into one-dimensional nonstationary random waves in the simulated spatial domain, and the simulation by wavenumber frequency spectrum is derived. So, the proposed simulation method can avoid the complicated Cholesky decomposition. Then, the proper orthogonal decomposition is employed to decompose the time-space dependent evolutionary power spectral density and the Fourier transform of time-varying coherent function, simultaneously, so that the two-dimensional Fast Fourier transform can be applied to further improve the simulation efficiency. Finally, the proposed method is applied to simulate the longitudinal nonstationary fluctuating wind velocity field along the transmission line to illustrate its performances.