• Bulletin of the Korean Chemical Society
• /
• v.21 no.7
• /
• pp.685-689
• /
• 2000

The complexation reaction between Pb2+,TI and Cd2+ions and macrocyclic ligands, 18-crown-6 ( 18C6) and dibenzo- 18-crown-6 (DB 18C6), was studied in dimethylsulfoxide (DMSO)-nitromethane (NM) and dimethyl-formamide (DMF)-nitromethane binary system s by square wave polarography (SWP) technique. The stoichiometry and stability of the complexes were determined by monitoring the shifts in half-waves or peak potentials of the polarographic waves of metal ions against the Iigand concentration. In most cases, the stability constants of complexes increase with increasing amounts of the nitromethane in mixed binary solvents used in this study. The complexes formed between 18C6 and DB18C6 and these metal cations in all cases had a stoichiometry of 1 : 1. The results obtained show that there is an inverse relationship between the formation constant of complexes and the donor number of solvents based on a Gatmann donocity scale and the stability constants show a high sensitivity to the composition of the mixed solvent systems. A linear behavior was observed for variation of log Kf of I8C6 complexes vs the composition of the mixed solvent systems in NM/DMSO and NM/DMF,but a non-linear behavior was observed in the case of DB 18C6 complexes in these binary systems. In most of the systems investigated, the Pb2+ cation forms a more stable complex with the 18C6 than other two cations and the order of selectivity of this Iigand for cations is: Pb2+ > TI+,Cd2+.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.28-51
• /
• 2018

Graphitic carbon nitride ($g-C_3N_4$) as a fascinating visible light active semiconductor photocatalyst has medium band gap, non-toxic nature, stable chemical structure and high thermal stability. Recently, intensive researches are focused on photocatalytic activity of $g-C_3N_4$ for wastewater treatment. This review demonstrates latest progress in fabrication of graphitic carbon nitride $C_3N_4$ incorporated nanocomposite to explore photocatalytic ability for water purification. The $g-C_3N_4$-based nanocomposites were categorized as $g-C_3N_4$ metal-free nanocomposite, noble metals/$g-C_3N_4$ heterojunction, non-metal doped $g-C_3N_4$, transition and post transition metal based $g-C_3N_4$ nanocomposite. Apart from fabrication methods, we emphasized on elaborating the mechanism of activity enhancement during photocatalytic process.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.58-68
• /
• 1994

An equilibrium approach is suggested as an effective tool for the analysis of sheet metal forming processes on the basis of force balance together with geometric relations and plasticity theroy. In computing a force balance equation, it is required to define a geometric curve approximating the shape of the sheet metal at any step of deformation from the geometric interaction between the die and the deforming sheet. Then the geometic informations for contacting and non-contacting sections of the sheet metal such as the number and length of both non-contact region, contact angle, and die radius of contact section are known from the geometric forming curve and utilized for optimization by force balance equation. In computation, the sheet material is assumed to be of normal amisotropy and rigid-phastic workhardening. It has been shown that there are good agreements between the equilibrium approach and FEM computation for the benchmark test example and auto-body panels whose sections can be assumed in plane-strain state. The proposed equilibrium approach can thus be used as a robust computational method in estimating the forming defects and forming severity rather quickly in the die design stage.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.5
• /
• pp.967-975
• /
• 2002

This study was to investigate the metal accumulation from Ohjeoksan-Decoction to rat brain(Sprague Dawley). 1. In Control group, each metal concentration was within 26.65mg/kg, and in each experimental groups, was within 28.39mg/kg. And, there were no significant metal concentration between control and experimental groups. Exceptionally, Cr and Ni level of control group was lower than experimental groups significantly. (p<0.05) and Cr and Ni level of experimental I group was lower than other experimental groups too.(p<0.05). But, Pb level of control group was higher than experimental groups significantly.(p<0.05) Pb level of experimental I group was higher than other experimental groups(p<0.01). 2. In non-hazardous, hazardous and total metal concentration, there was no increase tendency in brain according to the high dose of OD(Ohjeoksan-Decoction) intake. Reversely, in experimental groups, hazardous metal concentration was decrease by high OD intake.(p<0.05). 3. Correlation among each metal in brain was various in each groups. Briefly under the intake of Ohjeoksan-Decoction, that is very busy herb prescription, this study was defined within safety in brain metal level by P.O. during 10 days. But, there should be a more research about Pb increase by high dose OD intake

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.2
• /
• pp.242-257
• /
• 2000

This study was to investigate the metal accumulation from Ohjeoksan-Decoction to rat brain(Sprague Dawley). 1. In Control group, each metal concentration was within 26.65mg/kg. and in each experimental groups, was within 28.39mg/kg. And there were no significant metal concentration between control and experimental groups. Exceptionally, Cr and Ni level of control group was lower than experimental groups significantly. (p<0.05) and Cr and Ni level of experimental I group was lower than other experimental groups too. (p<0.05). But, Pb level of control group was higher than experimental groups significantly (p<0.05) Pb level of experimental I group was higher than other experimental groups(p<0.01) 2. In non-hazardous, hazardous and total metal concentration, there was no increase tendency in brain according to the high dose of OD(Ohjeoksan-Decoction) intake. Reversely, in experimental groups, hazardous metal concentration was decrease by high OD intake. (P<0.05) 3. Correlation among each metal in brain was various in each groups Briefly under the intake of Ohjeoksan-Decoction, that if very busy herb prescription , this study was defined within safety in brain metal level by P.O. during 10 days. But, there should be a more research about Pb increase by high dose OD intake

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.3
• /
• pp.295-302
• /
• 2007

Statement of problem. Fracture of the tooth-colored superstructure material is one of the main prosthetic complications in implant-supported prostheses. Purpose. The purpose of this in vitro study was to compare the fracture strength between the cement-retained implant-supported metal-ceramic crowns and the indirect composite resinveneered metal crowns under the vertical compressive load. Material and methods. Standard implants of external type (AVANA IFR 415 Pre-mount; Osstem Co., Busan, Korea) were embedded in stainless steel blocks perpendicular to their long axis. Customized abutments were fabricated using plastic UCLA abutments (Esthetic plastic cylinder; Osstem Co., Busan, Korea). Thirty standardized copings were cast with non-precious metal (Rexillium III, Pentron, Walling ford, Conn., USA). Copings were divided into two groups of 15 specimens each (n = 15). For Group I specimens, metal-ceramic crowns were fabricated. For Group II specimens, composite resin-veneered (Sinfony, 3M-ESPE, St. Paul, MN, USA) metal crowns (Sinfony-veneered crowns) were fabricated according to manufacturer's instructions. All crowns were temporary cemented and vertically loaded with an Instron universal testing machine (Instron 3366, Instron Corp., Norwood, MA, USA). The maximum load value (N) at the moment of complete failure was recorded and all data were statistically analyzed by independent sample t-test at the significance level of 0.05. The modes of failure were also investigated with visual analysis. Results. The fracture strength of Sinfony-veneered crowns ($2292.7{\pm}576.0N$) was significantly greater than that of metal-ceramic crowns ($1150.6{\pm}268.2N$) (P < 0.05). With regard to the failure mode, Sinfony-veneered crowns exhibited adhesive failure, while metal-ceramic crowns tended to fracture in a manner that resulted in combined failure. Conclusion. Sinfony-veneered crowns demonstrated a significantly higher fracture strength than that of metal-ceramic crowns in cement-retained implant-supported prostheses.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.139-147
• /
• 2023

The metal bush assembling process is a process of inserting and compressing a metal bush that serves to reduce the occurrence of noise and stable compression in the rotating section. In the metal bush assembly process, the head diameter defect and placement defect of the metal bush occur due to metal bush omission, non-pressing, and poor press-fitting. Among these causes of defects, it is intended to prevent defects due to omission of the metal bush by using signals from sensors attached to the facility. In particular, a metal bush omission is predicted through various data mining techniques using left load cell value, right load cell value, current, and voltage as independent variables. In the case of metal bush omission defect, it is difficult to get defect data, resulting in data imbalance. Data imbalance refers to a case where there is a large difference in the number of data belonging to each class, which can be a problem when performing classification prediction. In order to solve the problem caused by data imbalance, oversampling and composite sampling techniques were applied in this study. In addition, simulated annealing was applied for optimization of parameters related to sampling and hyper-parameters of data mining techniques used for bush omission prediction. In this study, the metal bush omission was predicted using the actual data of M manufacturing company, and the classification performance was examined. All applied techniques showed excellent results, and in particular, the proposed methods, the method of mixing Random Forest and SA, and the method of mixing MLP and SA, showed better results.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.19-22
• /
• 2008

In recent years, much attention has been paid to "Photocatalytic oxidation" as an alternative technique, where the pollutants are degraded by UV-irradiation in the presence of a semiconductor suspension such as titanium dioxide. $TiO_2$ is the most often used photocatalyst due to its considerable photocatalytic activity, high stability, non-environmental impact and low cost. 1n this research, the photocatalytic degradation of humic acid, acetaldehyde and methylene blue in $UV/TiO_2$ systems has been stydied. The effect of calcination temperature for manufacturing of $TiO_2$ photocatalysts and type of photocatalysts on photodegradation has been investigated. Photocatalysts with various metal ions(Mn, Fe, Cu and Pt) loading are tested to evaluate the effects of metal ions impurities on photodegradation. The photodegradation efficiency with $Pt-TiO_2$ or $Fe-TiO_2$ or $Cu-TiO_2$ is higher than Degussa P-25 powder. However, the photodegradation efficiency with $Mn-TiO_2$ is lower than Degussa P-25 powder. The photocatalytic properties of the nanocrystals were strongly dependent upon the crystallinity, particle size, standard reduction potential of various transition metal and electronegativity of various transition metal. As a result photocatalysts with various metal ion loading evaluated the effect of photodegradation.

• Toxicological Research
• /
• v.23 no.1
• /
• pp.1-9
• /
• 2007

Transporters are membrane proteins that mediate the transfer of substrate across the cellular membrane. In this overview, the characteristics and the toxicological relevance were discussed for various types of transporters. For drug transporters, the overview focused on ATP-binding cassette transporters and solute carrier family 21A/22A member transporters. Except for OCTN transporters and OATP transporters, drug transporters tend to have broad substrate specificity, suggesting drug-drug interaction at the level of transport processes (e.g., interaction between methotrexate and non-steroidal anti-inflammatory agents) is likely. For metal transporters, transporters for zinc, copper and multiple metals were discussed in this overview. These metal transporters have comparatively narrow substrate specificity, except for multiple metal transporters, suggesting that inter-substrate interaction at the level of transport is less likely. In contrast, the expressions of the transporters are often regulated by their substrates, suggesting cellular adaptation mechanism exists for these transporters. The drug-drug interactions in drug transporters and the cellular adaptation mechanisms for metal transporters are likely to lead to alterations in pharmacokinetics and cellular metal homeostasis, which may be linked to the development of toxicity. Therefore, the transporter-mediated alterations may have toxicological relevance.

• Journal of Environmental Health Sciences
• /
• v.20 no.4
• /
• pp.17-35
• /
• 1994

This study was performed to investigate and assess the heavy metal contamination of sediment in main stream and tributaries of the Han-river in the vicinity of Seoul. Sediment were sampled at eight locations of main stream and eighteen locations of tributaries in the spring, summer, and fall in 1993. Six heavy metals of Cd, Cu, Pb, Zn, Cr, and Hg, were assessed. For an assessment of heavy metal contamination in sediment, the assessment method of Hakanson was modified to estimate for Han-river, then classification method of Muller in sediment quality was applied. For an assessment of contamination in each heavy metal, Contamination factor C$_f^i$ which was defined the ratio of concentration of i heavy metal in investigated location to background concentration of i heavy metal in uncontaminated upper area was used. The sediment quality in each heavymetal was classified as follows if C$_f^i$<1, Class I for Non contamination, if 1 < C$_f^i$ < 3, Class II for Low contamination, if 3< C$_f^i$ <6, Class III for Moderate contamination, if 6< C$_f^i$ <12, Class IV for Considerable contamination, and if C$_f^i$ > 12, Class V for High contamination.(abbreviation)