• 한국분말재료학회지
• /
• 제26권1호
• /
• pp.49-57
• /
• 2019

Layered $LiNi_{0.83}Co_{0.11}Mn_{0.06}O_2$ cathode materials single- and dual-doped by the rare-earth elements Ce and Nd are successfully fabricated by using a coprecipitation-assisted solid-phase method. For comparison purposes, non-doping pristine $LiNi_{0.83}Co_{0.11}Mn_{0.06}O_2$ cathode material is also prepared using the same method. The crystal structure, morphology, and electrochemical performances are characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) mapping, and electrochemical techniques. The XRD data demonstrates that all prepared samples maintain a typical ${\alpha}-NaFeO_2$-layered structure with the R-3m space group, and that the doped samples with Ce and/or Nd have lower cation mixing than that of pristine samples without doping. The results of SEM and EDS show that doped elements are uniformly distributed in all samples. The electrochemical performances of all doped samples are better than those of pristine samples without doping. In addition, the Ce/Nd dual-doped cathode material shows the best cycling performance and the least capacity loss. At a 10 C-rate, the electrodes of Ce/Nd dual-doped cathode material exhibit good capacity retention of 72.7, 58.5, and 45.2% after 100, 200, and 300 cycles, respectively, compared to those of pristine samples without doping (24.4, 11.1, and 8.0%).

• 한국재료학회지
• /
• 제28권11호
• /
• pp.633-639
• /
• 2018

In anion exchange membrane fuel cells, Pd nanoparticles are extensively studied as promising non-Pt catalysts due to their electronic structure similar to Pt. In this study, to fabricate Pd nanoparticles well dispersed on carbon support materials, we propose a synthetic strategy using mixed organic ligands with different chemical structures and functions. Simultaneously to control the Pd particle size and dispersion, a ligand mixture composed of oleylamine(OA) and trioctylphosphine(TOP) is utilized during thermal decomposition of Pd precursors. In the ligand mixture, OA serves mainly as a reducing agent rather than a stabilizer since TOP, which has a bulky structure, more strongly interacts with the Pd metal surface as a stabilizer compared to OA. The specific roles of OA and TOP in the Pd nanoparticle synthesis are studied according to the mixture composition, and the oxygen reduction reaction(ORR) activity and durability of highly-dispersed Pd nanocatalysts with different particles sizes are investigated. The results of this study confirm that the Pd nanocatalyst with large particles has high durability compared to the nanocatalyst with small Pd nanoparticles during the accelerated degradation tests although they initially indicated similar ORR performance.

• 반도체디스플레이기술학회지
• /
• 제17권4호
• /
• pp.66-69
• /
• 2018

This study was researched the electrical properties of semiconductor devices such as ITO, $SiO_2$, $V_2O_5$ thin films. The films of ITO, $SiO_2$, $V_2O_5$ were deposited by the rf magnetron sputtering system with mixed gases of oxygen and argon to generate the plasma. All samples were cleaned before deposition and prepared the metal electrodes to research the current-voltage properties. The electrical characteristics of semiconductors depends on the interface's properties at the junction. There are two kinds of junctions such as ohmic and schottky contacts in the semiconductors. In this study, the ITO thin film was shown the ohmic contact properties as the linear current-voltage curves, and the electrical characteristics of $SiO_2$ and $V_2O_5$ films were shown the non-linear current-voltage curves as the schottky contacts. It was confirmed that the electronic system with schottky contacts enhanced the electronic flow owing to the increment of efficiency and increased the conductivity. The schottky contact was only defined special characteristics at the semiconductor and the interface depletion layer at the junction made the schottky contact which has the effect of leakage current cutoff. Consequently the semiconductor device with shottky contact increased the electronic current flow, in spite of depletion of carriers.

• 자원리싸이클링
• /
• 제28권4호
• /
• pp.3-14
• /
• 2019

납은 현대산업에서 범용적으로 사용되는 비철금속이다. 전세계의 납 생산량은 1970년대의 약 500만 톤에서 점차 증가하여 2010년대에는 1,100만 톤까지 이르렀다. 특히 납은 품질의 저하없이 100 % 리사이클링할 수 있는 금속으로, 납 스크랩을 리사이클링하면 1차 지금 생산과 비교하여 에너지 및 환경부하를 현저하게 저감할 수 있다. 이러한 이유로 전세계 납 사용량의 약 60 %는 리사이클링으로부터 공급되고 있다. 주로 납축전지인 납 스크랩은 1차 제련소나 2차제련소에서 정련하고 있다. 대부분의 2차 제련은 용광로와 같은 샤프트로, 회전로, 그리고 반사로에서 이루어 지고 있다. 2차 제련에서 생산된 조연은 잉곳으로 주조하거나 케틀로에서 재용해하여 정제를 하지만, 용융상태의 조연에서 곧바로 정련을 하기도 한다. 본 연구에서는 납의 1차지금 생산 및 리사이클링 공정에 대해 고찰하였다.

• The Journal of Advanced Prosthodontics
• /
• 제11권5호
• /
• pp.280-285
• /
• 2019

PURPOSE. The present study was designed to examine the clinical fit of fixed dental prosthesis fabricated by the milling-sintering method using a presintered cobalt-chromium alloy. MATERIALS AND METHODS. Two single metal-ceramic crowns were fabricated via milling-sintering method and casting method in each of the twelve consecutive patients who required an implant-supported fixed prosthesis. In the milling-sintering method, the prosthetic coping was designed in computer software, and the design was converted to a non-precious alloy coping using milling and post-sintering process. In the casting method, the conventional manual fabrication process was applied. The absolute marginal discrepancy of the prostheses was evaluated intraorally using the triple-scan technique. Statistical analysis was conducted using Mann-Whitney U test (${\alpha}=.05$). RESULTS. Eight patients (66.7%) showed a lower marginal discrepancy of the prostheses made using the milling-sintering method than that of the prosthesis made by the casting method. Statistically, the misfit of the prosthesis fabricated using the milling-sintering method was not significantly different from that fabricated using the casting method (P=.782). There was no tendency between the amount of marginal discrepancy and the measurement point. CONCLUSION. The overall marginal fit of prosthesis fabricated by milling-sintering using a presintered alloy was comparable to that of the prosthesis fabricated by the conventional casting method in clinical use.

• 한국환경보건학회지
• /
• 제45권1호
• /
• pp.54-61
• /
• 2019

Objectives: In this study, we investigated an assessment for exposure levels of hazardous substances to kids cafes that unregulated by law. Methods: Heavy metals, volatile organic compounds, formaldehyde, pesticides and phthalate were measured at 20 kids cafes in Gyeonggi-do and Incheon. Samplings were conducted from April to July in 2018. Results: Heavy metals were detected over the standard mainly around the floor and walls in the 19 kids cafes. Pesticides were detected in 7 locations with chlorpyrifos, diazinon and cypermethrin, and showed the highest detection level of chlorpyrifos. The concentrations of DEHP in all kids cafes were exceeded with standard. The risk assessment results showed that HCHO as carcinogen had a safety level and DEHP as non-carcinogens had a safety level as assessed to be under than 0.1. Conclusions: Considering the exposure investigation results and the importance of child health protection, kids cafe should be included in the legal management list of children's activities zones.

• 한국융합학회논문지
• /
• 제10권4호
• /
• pp.189-194
• /
• 2019

본 논문은 산업전반에 빠르게 도입되어가고 있는 3D프린팅 기술을 이용하여 주얼리 디자인에 적용하기 위해 시작되었다. 선행연구를 살펴본 결과 디자인 분야에서는 3D출력 방식중 FMD방식이 가장 많이 사용되고 있었다. 하지만 주얼리 디자인에서는 3D프린팅은 제작과정 중 주조 과정에 사용되고 있어 출력방식이 FMD가 아닌 DLP방식을 사용하고 있다. 따라서 연구자는 DLP방식의 3D프린팅을 활용하여 주얼리 디자인에 응용함으로서 주얼리 디자인의 재료적 기능과, 활용 가능성에 대해 연구 작품을 통해 알아보았다. 그 결과 3D프린팅 출력 후 주조과정 없이 주얼리 디자인에 응용하고 에나멜, 정은 등을 함께 활용하여 브로치를 완성함으로서 가볍고 단단하며 다양한 색상의 완성품을 제작하여 적용 가능한 재료임을 알 수 있었다. 또한 기하학 구조가 아닌 주얼리 디자인에서 주로 사용되는 곡선적 디자인을 Rhino CAD로 크기와 형태를 정확히 예측할 수 있어 향후 주얼리 디자인 조형 형태 전개에 쉽게 활용할 수 있는 다양한 발전 가능성을 엿 볼 수 있었다.

• Corrosion Science and Technology
• /
• 제20권4호
• /
• pp.204-209
• /
• 2021

Corrosion failure analysis of the flow plate, which is one of the accessories of the plate heat exchanger in a district heating system, was performed. The flow plate is made of 316 stainless steel, and water at different temperatures in the flow plate exchanges heat in a non-contact manner. The flow plate samples in which water mixing issues occurred were collected. Corrosion-induced pits, oxides, and contaminants were observed at locations where two plates are regularly in contact. The EDS analysis of the surface oxides and contaminants revealed that they were composed of carbon, silicon, and magnesium, which came from chemical adhesives. The IC/ICP analyses showed that the concentration of chloride ions was 30 ~ 40 ppm, which was not sufficient to cause corrosion of stainless steel. In the crevice, a local decrease in dissolved oxygen occurs along with an increase in chloride ions, thus forming an acidic environment. These environments destroyed the passive film of stainless steel, resulting in pits. Moreover, contaminants formed a narrower gap between the two metal plates and inhibited the diffusion of ions, thereby accelerating crevice corrosion.

• 대한금속재료학회지
• /
• 제46권9호
• /
• pp.554-562
• /
• 2008

The distribution and prediction interval for the misorientation angle of grain boundary at which $Cr_2N$ was precipitated during heating at $900^{\circ}C$ for $10^4$ sec were newly estimated, and followed by the estimation of mathematical and median rank methods. The probability density function of the misorientation angle can be estimated by a statistical analysis. And then the ($1-{\alpha}$)100% prediction interval of misorientation angle obtained by the estimated probability density function. If the estimated probability density function was symmetric then a prediction interval for the misorientation angle could be derived by the estimated probability density function. In the case of non-symmetric probability density function, the prediction interval could be obtained from the cumulative distribution function of the estimated probability density function. In this paper, 95, 99 and 99.73% prediction interval obtained by probability density function method and cumulative distribution function method and compared with the former results by median rank regression or mathematical method.

• 복식문화연구
• /
• 제29권1호
• /
• pp.28-47
• /
• 2021

The purpose of this study is to provide basic data to assist students and industrial designers in fashion by examining the trend of designing women's wear with the SCAMPER method. In the research, the seven types of SCAMPER methods for fashion design were classified based on the previous studies. From 2010 S/S to 2020 S/S, data from 5,149 photographs were collected through overlapping checks and classified by SCAMPER method type. Data analysis was performed using SPSS 25.0 for frequency analysis. As a result, in the SCAMPER "combine" method, more than two items were combined, or structural details were combined with items. In the most applied "adapt" method was involved imitating similar images, or natural forms, or other objects. The "modify" method was applied by changing the shape of some details in basic fashion items. The "magnify" method was applied by enlarging, elongating, or elevating some details of fashion items. The "minify" method was applied by minimizing, shortening, or lowering some details of basic fashion. The method of "put to other use" was expressed throughout the clothing by using non-fabric or trimmings such as metal, beads, and strings. The "rearrange" method was applied by repositioning the top and bottom, front and back, or outside and inside in fashion items and in details. The "reverse" method was applied by reversing the style of fashion, mix-and-match fabric, or switching the gender of the fashion items.