• 한국산업보건학회지
• /
• 제31권2호
• /
• pp.111-118
• /
• 2021

Objectives: The necessity of samples for analysis requested by working environment monitoring institutes (WMIs) has grown recently. The collection of samples of a few chemical substances requested by WMIs is allowed under the current occupational safety and health act in Korea, leading to an expansion of samples for analysis requested by institutes (SRIs). The objective of this study was to identify the number of institutes for analyzing requested samples (IARS), SRIs, and their participation in a non-mandatory proficiency test. Methods: Questionnaires were completed by all WMIs. The collected information was quantity of analysis equipment, sorting of chemicals from SRIs, and the number of SRIs. This was compared in terms of the participation in the non-mandatory proficiency test. Results: All WMIs in Korea responded to the survey, establishing a 100% response rate. There were 52 (29%) IARS among the 179 WMIs in Korea. The total number of samples of acid for ion chromatograph (IC) analysis requested by WMIs was 21,165, which is the most. Even the number of IARS for crystalline silicon oxide was less than other top-five IARS. The total amount of samples was 13,863, which was the second most. The calculated participation score for IARS was significantly higher than other WMIs (p<0.001). According to participation in the non-mandatory proficiency test by type of substance, such as crystalline silicon oxide and formaldehyde among IARS, the number of SRIs from those IARS was significantly higher than IARS that did not participate in the proficiency test (p<0.05). Conclusions: IARS had a high frequency of participation in the non-mandatory proficiency test and the number of SRIs at IARS participating in the proficiency test was higher among IARS. With the revision of the occupational health and safety act in Korea, the number of IARS participating in the non-mandatory proficiency test might increase.

• 한국산업보건학회지
• /
• 제34권3호
• /
• pp.247-253
• /
• 2024

Objectives: The purpose of this study is to establish a method for the production of standard samples of crystalline silica and to assess its feasibility for the future application in non-mandatory quality control. Methods: We dispersed crystalline silica in 2-propanol to prepare a 1 mg/mL dispersion solution. Between 50-200 uL of the dispersion solution was taken with a pipette, injected onto PVC filters, air-dried, and used as samples. The variation and homogeneity of the quartz concentrations were confirmed by FTIR analysis. Analytical proficiency testing was conducted across 30 voluntary participants. Results: The coefficient of variation was lower for samples prepared using supernatant (settled for 16 hours) compared to those made with dispersion solution. The contamination level after using the pipette tip one to five times was 8.13-9.89% of the solution's concentration. Homogeneity was confirmed within the concentration of 0.0223-0.0431 mg/mL, but it was not at the higher concentration of 0.0553 mg/mL. In the analytical proficiency testing, the coefficient of variation for each level ranged from 24.6% to 28.3%, with a compliance rate of 90.0% to 96.7%. Conclusions: This study was conducted to produce standard samples of crystalline silica. The homogeneity of the samples was confirmed at low concentrations. However, further investigations on the applicability of wider range of concentrations are needed.