• Structural Engineering and Mechanics
• /
• 제85권2호
• /
• pp.197-206
• /
• 2023

The deterioration caused by chloride penetration and carbonation plays a significant role in a concrete structure in a marine environment. The chloride corrosion in some marine concrete structures is invisible but can be dangerous in a sudden collapse. Therefore, as a novelty, this research investigates the ability of a non-destructive damage detection method named the Power Spectral Density (PSD) to diagnose damages caused only by chloride ions in concrete structures. Furthermore, the accuracy of this method in estimating the amount of annual damage caused by chloride in various parts and positions exposed to seawater was investigated. For this purpose, the RC Arosa bridge in Spain, which connects the island to the mainland via seawater, was numerically modeled and analyzed. As the first step, each element's bridge position was calculated, along with the chloride corrosion percentage in the reinforcements. The next step predicted the existence, location, and timing of damage to the entire concrete part of the bridge based on the amount of rebar corrosion each year. The PSD method was used to monitor the annual loss of reinforcement cross-section area, changes in dynamic characteristics such as stiffness and mass, and each year of the bridge structure's life using sensitivity equations and the linear least squares algorithm. This study showed that using different approaches to the PSD method based on rebar chloride corrosion and assuming 10% errors in software analysis can help predict the location and almost exact amount of damage zones over time.

• 지구물리와물리탐사
• /
• 제10권2호
• /
• pp.138-146
• /
• 2007

이 연구에서 복소 전기비저항을 이용한 2차원 IP 모델링 알고리듬과 이를 이용한 역산 알고리듬을 개발하였다. 복소 전기비저항을 이용한 IP 탐사기법은 크기인 전기비저항과 위상정보를 제공함으로써 지하의 수리지질학적인 특성 및 내부 공극수 종류 등 다양한 정보의 제공이 가능하여 활용성이 확대되고 있다. IP 탐사 모델링 및 역산 알고리듬은 기존의 전기비저항 모델링 및 역산 알고리듬을 복소 연산을 포함하도록 확장함으로써 개발되었다. IP 모델링은 유한요소법을 이용한 2.5차원 모델링 알고리듬을, 역산 알고리듬으로는 평활화 제한을 가한 감쇠 최소자승법을 이용하였다. 모델링의 검증에는 슐럼버저 배열에 대하여 3차원 층서모형에 수치필터링을 이용한 1차원 모델링 결과와 비교하였으며, 쌍극자 배열에 대하여 고립이상체 모형에 3차원 적분방정식 IP 모델링 알고리듬과 비교하여 그 타당성을 확인하였다. 역산의 타당성을 확인하기 위하여 전기비저항 및 위상 중 하나는 배경매질과 동일하고 다른 물성 하나만 차이를 가지는 모델에 대하여 역산 실험을 수행하였으며, 전기비저항 및 위상 이상체를 정확히 영상화하고 있음을 확인하였다. 역산의 실제 복잡한 지질모델에의 적용성을 확인하기 위해, 3차원 층서구조 내에 두 번째 층의 일부에 위상 이상체가 존재하는 모형을 설정하여 수치실험을 수행한 결과 전기비저항 단면에서는 이상체가 잘 확인되지 않으나, 위상 단면에서 그 이상체가 명확히 나타나는 것을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권6호
• /
• pp.806-817
• /
• 2014

The objective of this experiment was to evaluate the effect of providing different levels of a supplement on the nutritional characteristics and productive performance of heifers on pasture during the rainy-dry transition and dry season in Brazil or tropical area. Thirty crossbred heifers with predominance of Zebu breed were used in a completely randomized experimental design. Treatments consisted of a mineral supplement and 0.5, 1.0, 1.5, or 2.0 kg/animal/d of a protein supplement containing 300 g crude protein (CP)/kg of dry matter (DM). In the rainy-dry transition season there was quadratic effect of the protein supplementation (p<0.10) on daily weight gain (DWG). A linear relationship (p<0.10) was found between increasing supplement intake and intakes of DM, organic matter (OM), crude protein (CP), ether extract (EE), non fibrous carbohydrates (NFC) and total digestible nutrients (TDN). Coefficients of apparent digestibility of CP, EE, and NFC increased linearly (p<0.10) with increasing supplement levels, but there was no effect on the DM apparent digestibility (p>0.10); the microbial efficiency (g CPmic/kg TDN) and the relationship of microbial nitrogen flow with nitrogen intake (g/g nitrogen intake) were negative linear profiles. In the dry season, the descriptive pattern least squares means showed a trend of stabilization of DWG from the supply of 0.98 kg of protein supplement; the intakes of DM, OM, CP, EE, NFC, and TDN showed increasing linear relationship (p<0.10) with protein supplement levels; the means of apparent digestibility coefficients of the different dietary fractions presented a linear-response-plateau (LRP); the microbial nitrogen flow (g/d) showed positive linear profile (p<0.10) for supplementation levels. It is concluded that supplementation improves the productive performance of grazing heifers and that 1.0 kg/d of supplement per animal gives the maximum increment of weight gain.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1890-1899
• /
• 1992

본 연구에서는 이종재료간의 Ⅴ-노치균열의 노치각도 및 재료의 종류에 따른 응력특이성지수와 응력강도 계수 해석에 각각 뉴톤-랍슨법(newtonraphson method), 뉴톤-랍슨법과 최소자승법을 이용한 선점법(collocation method)인 수치해석적 방법을 응용하고, 광탄성 등색선 무늬를 컴퓨터 그래픽하여 응력특이성지수와 응력강도계수가 모우드(mode)에 미치는 특성과 경계요소법(boundary element method)으로 응력해석한 결과로써 선점법을 이용하여 응력강도계수를 해석하고 기존의 결과등과 비교, 검토하 고자 한다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1528-1528
• /
• 2001

Ginseng cultivated in different country or growing condition has generally different components such as saponin and protein, and it relates to efficacy and action. Protein content assumes by nitrogen content in ginseng radix. Nitrogen content could be determined by chemical analysis such as kjeldahl or extraction methods. However, these methods require long analysis time and result environmental pollution and sample damage. In this work we investigated possibility of non-destructive determination of nitrogen content in ginseng radix using near-infrared spectroscopy. Ginseng radix, root of Panax ginseng C. A. Meyer, was studied. Total 120 samples were used in this study and it was consisted of 6 sample sets, 4, 5 and 6-year-old Korea ginseng and 7, 8 and 9-year-old China ginseng, respectively. Each sample set has 20 sample. Nigrogen content was measured by electronic analysis. NIR reflectance spectra were collected over the 1100 to 2500 nm spectral region with a InfraAlyzer 500C (Bran+Luebbe, Germany) equipped with a halogen lapmp and PbS detector and data were collected every 2 nm data point intervals. The calibration models were carried out by multiple linear regression (MLR) and partial least squares (PLS) analysis using IDAS and SESAME software. Result of electronic analysis, Korean ginseng were different mean value in nitrogen content of China ginseng. Ginseng tend to generally decrease the nitrogen content according as cultivation year is over 6 years. The MLR calibration model with 8 wavelengths using IDAS software accurately predicted nitrogen contents with correlation coefficient (R) and standard error of prediction of 0.985 and 0.855%, respectively. In case of SESAME software, the MLR calibration with 9 wavelength was selected the best calibration, R and SEP were 0.972 and 0.596%, respectively. The PLSR calibration model result in 0.969 of R and 0.630 of RMSEP. This study shows the NIR spectroscopy could be applied to determine the nitrogen content in ginseng radix with high accuracy.

• Journal of Microbiology and Biotechnology
• /
• 제30권4호
• /
• pp.533-539
• /
• 2020

A quantitative real-time polymerase chain reaction (QPCR) was applied to estimate biokinetic coefficients of Clostridium cadaveris and Clostridium sporogenes, which utilize protein as carbon source. Experimental data on changes in peptone concentration and 16S rRNA gene copy numbers of C. cadaveris and C. sporogenes were fitted to model. The fourth-order Runge-Kutta approximation with non-linear least squares analysis was employed to solve the ordinary differential equations to estimate biokinetic coefficients. The maximum specific growth rate (μ_max), half-saturation concentration (K_s), growth yield (Y), and decay coefficient (K_d) of C. cadaveris and C.sporogenes were 0.73 ± 0.05 and 1.35 ± 0.32 h^-1, 6.07 ± 1.52 and 5.67 ± 1.53 g/l, 2.25 ± 0.75 × 10¹⁰ and 7.92 ± 3.71 × 10⁹ copies/g, 0.002 ± 0.003 and 0.002 ± 0.001 h^-1, respectively. The theoretical specific growth rate of C. sporogenes always exceeded that of C. cadaveris at peptone concentration higher than 3.62 g/l. When the influent peptone concentration was 5.0 g/l, the concentration of C.cadaveris gradually decreased to the steady value of 2.9 × 10¹⁰ copies/ml at 4 h Hydraulic retention time (HRT), which indicates a 67.1% reduction of the initial population, but the wash out occurred at HRTs of 1.9 and 3.2 h. The 16S rRNA gene copy numbers of C. sporogenes gradually decreased to steady values ranging from 1.1 × 10¹⁰ to 2.9 × 10¹⁰ copies/ml. C. sporogenes species was predicted to wash out at an HRT of 1.6 h.

• Computers and Concrete
• /
• 제8권3호
• /
• pp.293-309
• /
• 2011

A long-term structural health monitoring (SHM) system comprising over 700 sensors of sixteen types has been implemented on the Guangzhou Television and Sightseeing Tower (GTST) of 610 m high for real-time monitoring of the structure at both construction and service stages. As part of this sophisticated SHM system, 48 temperature sensors have been deployed at 12 cross-sections of the reinforced concrete inner structure of the GTST to provide on-line monitoring via a wireless data transmission system. In this paper, the differential temperature profiles in the reinforced concrete inner structure of the GTST, which are mainly caused by solar radiation, are recognized from the monitoring data with the purpose of understanding the temperature-induced structural internal forces and deformations. After a careful examination of the pre-classified temperature measurement data obtained under sunny days and non-sunny days, common characteristic of the daily temperature variation is observed from the data acquired in sunny days. Making use of 60-day temperature measurement data obtained in sunny days, statistical patterns of the daily rising temperature and daily descending temperature are synthesized, and temperature distribution models of the reinforced concrete inner structure of the GTST are formulated using linear regression analysis. The developed monitoring-based temperature distribution models will serve as a reliable input for numerical prediction of the temperature-induced deformations and provide a robust basis to facilitate the design and construction of similar structures in consideration of thermal effects.

• 디지털융복합연구
• /
• 제14권1호
• /
• pp.203-209
• /
• 2016

본 논문에서는 퍼지 클러스터를 이용한 비선형 추론을 위한 퍼지 추론 시스템을 소개한다. 전형적으로, 비선형 추론을 위한 퍼지 규칙의 생성은 일반적으로 입력 벡터 차원이 증가하면 규칙의 수가 지수적으로 증가하게 된다. 이러한 문제점을 해결하기 위해, 퍼지 클러스터를 표현할 수 있는 퍼지 클러스터링 알고리즘을 이용하여 입력 벡터 공간을 분산 형태로 분할하여 퍼지 모델의 규칙을 설계한다. 이러한 방법으로 복잡하고 비선형적인 공정을 퍼지 모델링 할 수 있다. 퍼지 규칙의 전반부는 퍼지 클러스터를 갖는 FCM 클러스터링 알고리즘에 의해 결정된다. 퍼지 규칙의 후반부는 4가지 형태의 다항식 함수의 형태를 가지며, 각 규칙의 후반부 파라미터들은 표준 최소자승법을 이용함으로써 추정된다. 그리고 비선형 공정의 특성 및 성능을 평가하기 위하여 비선형 공정으로 많이 이용되고 있는 데이터를 이용한다. 실험 결과는 비선형 추론이 가능하다는 것을 보여준다.

• 농업과학연구
• /
• 제47권3호
• /
• pp.645-655
• /
• 2020

Bacteria are a very common cause of food poisoning. Moreover, bacteria form biofilms to protect themselves from harsh environments. Conventional detection methods for foodborne bacterial pathogens including the plate count method, enzyme-linked immunosorbent assays (ELISA), and polymerase chain reaction (PCR) assays require a lot of time and effort. Hyperspectral imaging has been used for food safety because of its non-destructive and real-time detection capability. This study assessed the feasibility of using hyperspectral imaging and machine learning techniques to detect biofilms formed by Escherichia coli. E. coli was cultured on a high-density polyethylene (HDPE) coupon, which is a main material of food processing facilities. Hyperspectral fluorescence images were acquired from 420 to 730 nm and analyzed by a single wavelength method and machine learning techniques to determine whether an E. coli culture was present. The prediction accuracy of a biofilm by the single wavelength method was 84.69%. The prediction accuracy by the machine learning techniques were 87.49, 91.16, 86.61, and 86.80% for decision tree (DT), k-nearest neighbor (k-NN), linear discriminant analysis (LDA), and partial least squares-discriminant analysis (PLS-DA), respectively. This result shows the possibility of using machine learning techniques, especially the k-NN model, to effectively detect bacterial pathogens and confirm food poisoning through hyperspectral images.

• 한국컴퓨터그래픽스학회논문지
• /
• 제3권2호
• /
• pp.27-34
• /
• 1997

3 차원 영상 모델링은 자동 시각적 검사와, 비파괴 검사분야에서 절실히 요구되고 있는 연구 분야이다. 또한 그것은 생의학연구, 의료, 수술계획과 정교성이 요구되는 중대한 수술 (안면 절개) 등에 매우 유용하다. 영상처리 및 분석 기술은 3 차원 의료 영상 정보의 질올 높여 주는데, 의료정보를 정확하고 빠르게 분석하는 일은 용이하지 않다. 본 논문에서는 향상된 3 차원 의료영상의 가시화를 위하여 사면체 분할법에 의한 모델링 방법을 제안한다. 이 방법에서는 트라이 베리에이트 구간별 선형 보간법이 구축된 사면체영역에 걸쳐 적용된다. 그리고, 등면, 색채 윤곽, 슬라이싱 등 가시화 방법들도 논의된다. 이것은 마칭큐브스 알고리즘으로 인해 제기되는 불확실한 경우가 발생하지 않고, 자료 감축의 효과도 가져올 수 있으므로 보다 정확하고 빠른 의료정보 분석에 기여할 수 있을 것으로 사료된다. 그리고, 자료 감축으로 인한 정확도의 감소가 발생할 경우에는 최소제곱을 바탕으로 한 사면체 세분할을 사용하여 보완할 수 있을 것으로 기대한다.