• Health Policy and Management
• /
• v.16 no.4
• /
• pp.128-146
• /
• 2006

The objective of this paper is to examine the proportion and characteristics of non-emergent patients at emergency departments. The observational survey was conducted using a structured form used by emergency medicine specialists or senior residents on June 7-20, 2005. 1,526 patients at ten emergency centers took part in this study. The structural form contained type of insurance, route and means of emergency department (ED) visit, triage based on the Manchester Triage Scale(MTS)-modified criteria, emergency level based on the government defined rule, type of emergency centers (Regional Emergency Medical Center; REMC, Local Emergency Medical Center; LEMC, Local Emergency Agency; LEA), as well as patient's general information. Data were analyzed using SAS statistical program(V.8.2). Descriptive analysis was performed to describe the magnitude of non-emergent patients. ${\chi}^2-analysis$ and logistic regression analysis was performed to identify the nonurgent patients' characteristics. In the MTS-modified criteria, we found a 15.3% rate of non-emergent patients. This rate differed from that of non-emergent patients obtained using government's rule. In particular, there were inaccuracies in the definition of government rule on non-emergent patients, so it is necessary to apply the new government rule regarding classification of non-emergent patients. There were significant differences in the rate of non-emergent patients according to type of ED, means of ED visit, time to visit, and insurance. Non-emergent patients are more likely to visit a D-type ED(LEA having less than 20,000 patients annually), not to use ambulance, to have 'Automobile Insurance, Industrial Accident Compensation Insurance, or pay out-of-pocket'. Non-emergent patients tend to visit ED due to illness rather than injury. Further studies on the development' of triage scale and reexamination of the government's rule on emergency visits are required for future policy in this area.

• International Journal of Quality Innovation
• /
• v.9 no.2
• /
• pp.129-147
• /
• 2008

This research is to investigate the effect of the improvement of investment environments with investment incentive on Korean national economy by looking into the foreign investment support system in Korea. To this end, first research model was set up based on our literary study and case study was conducted on 150 foreign companies that were located in industrial complex for foreign companies, received the tax benefit and government subsidization. And it was found that even though the foreign companies were contributing to the national economy in general such as in the area of production, export, employment, development of technology, there was no significant contributory difference between the investment incentive beneficiary and non-beneficiary foreign companies. Therefore it deemed reasonable to reconsider the way Korean government supports foreign companies in Korea and to reinforce foreign companies' relevance to national policy agenda with additional incentives to foreign companies located in comparatively less developed areas. As a way to promote foreign investment, promotion of investment infra such as improvement of follow-up services, openness to foreign investment, industrial deregulations in capital area, revitalization of free economic zone, efficient system to promote foreign investment and the reinforcement of public relations were considered necessary, especially the upgrading of economic structure and the integrated management of domestic and foreign investors deemed necessary for the optimal distribution of the industries.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.2
• /
• pp.94-103
• /
• 2008

This study measured technology transfer efficiency for public institutes. The study made use of DEA being one of the non-parametric linear programming to evaluate technology transfer efficiency for public institutes and to measure technology efficiency, pure technical efficiency and scale efficiency. The measurement of the technology transfer efficiency for public institutes was as follows: The cause of the technology transfer inefficiency was affected by pure technical inefficiency more than by scale inefficiency. Public institutes' RTS(Return To Scale) value varied depending upon the features of the organizations than the features of the regions. Public research institutes' RTS value is more effective than universities' RTS value. We compared the RTS group with the RTS of Projected DMU groups. The RTS group had constant returns to scale effect while the RTS of the Projected DMU had increasing returns to scale effect. The technology transfer efficiency of public institutes varied depending upon the features of the organizations and regions : The technology transfer efficiency of public institutes were as follows : public research institutes at the metropolitan area, public research institutes at the local areas, universities at the metropolitan area and universities at the local areas. In other words, the technology transfer efficiency was affected by organizational characteristics more than by regional characteristics at the place where public institutes were located.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.4
• /
• pp.41-52
• /
• 2021

With the popularization of drones and the ease of use of the Global Navigation Satellite System (GNSS), drone photogrammetry for terrain information has been widely used. Drone photogrammetry enables the realization of high-accuracy three-dimensional topography for the entire area with less effort and time compared to the past direct survey using GNSS or total station. From 3-D topographic data, various topographical analysis is possible. To improve the accuracy of drone photogrammetry, direct GCP surveying in the field is essential, and the numbers and reasonable positioning of GCPs are very important. In the case of beaches or tidal flats on the west coast of Korea, the numbers and location of GCPs are important factors in efficient drone photogrammetry because of the size of the area, difficulties of movement, and the risk from tides. If the RTK (Real-time kinematic) or PPK (Post-processed kinematic) method is used, the increased accuracy of the drone's location enables high-accuracy photogrammetry with a small number of GCPs. This study presents an efficient drone photogrammetry method in terms of time and economy by comparing and analyzing the results of drone photogrammetry using Non-PPK with low-cost PPK-Kit, based on the tests of various numbers and locations of GCPs in the university field including various slopes and structures like coastal terrain.

• International Journal of Advanced Culture Technology
• /
• v.12 no.2
• /
• pp.334-344
• /
• 2024

In Dangjin, Chungcheongnam-do, there are not only power plants and large steel complexes, but also small and medium-sized air pollutant emission facilities. The dust generated by these facilities has a very small particle size and a large surface area due to condensation and physical and chemical reactions, and is discharged containing various harmful substances. Therefore, this study analyzed the distribution of particulate matter and heavy metal concentrations by particle size in the vicinity of the steel complex, residential area, and reference point using an eight-stage Cascade Impactor. Overall, the direct impact sites with a short distance from the steel complex had the highest concentration, followed by the indirect impact sites, and the non-impact sites had the lowest concentration, indicating that they are directly affected by the steel complex. The atmospheric dust concentration distribution showed a bimodal distribution with a minimum value around the 1.1 to 2.1 ㎛ particle diameter. However, during the yellow dust event, the maximum concentration was biased toward coarse particles. The proportion of PM2.5 in the dust tended to be higher in winter, while the ratio between PM2.5 and PM10 was relatively higher in spring. Regardless of the location of the impact point, heavy metals in the dust were dominated by iron and aluminum, followed by zinc, lead, and manganese.

• Journal of Environmental Science International
• /
• v.22 no.1
• /
• pp.7-15
• /
• 2013

Aerosol characterization study for individual particle in Busan metropolitan industrial complex was carried out from December 2010 to August 2011. SEM(scanning electron microscope)-EDX(energy dispersive x-ray) analysis was used for the analysis of 600 single particles during the sampling periods to identify non-metallic aerosol particle sources. Average $PM_{10}$ concentration was 65.5 ${\mu}g/m^3$ in summer, 104.1 ${\mu}g/m^3$ in winter during the sample periods. And Average $PM_{2.5}$ concentration was 24.5 ${\mu}g/m^3$ in summer, 64.5 ${\mu}g/m^3$ in winter individually. Particle density, enrichment factor, correlation analysis, principle component analysis were performed based on chemical composition data. Particle density distribution was measured to 2~4 $g/cm^3$, and the density of $PM_{2.5}$ was measured above 3 $g/cm^3$. In general, the elements Si, Ca, Fe and Al concentrations were higher in all samples of individual particles. The non-ferrous elements Zn, Br, Pb, Cu concentrations were higher in summer than in winter. The concentrations were not changed with the seasons because of non-ferrous industry emission pattern.

• Asian Journal of Atmospheric Environment
• /
• v.12 no.3
• /
• pp.274-288
• /
• 2018

Quantitative data of 50 non-polar organic compounds constituting $PM_{2.5}$ were continuously collected and analyzed from June 2016 to October 2017 (approximately 17 months) at Ichihara, one of the largest industrial areas in Japan. Target non-polar organic compounds including 21 species of polycyclic aromatic hydrocarbons (PAHs), 24 species of n-alkanes and 5 species of phthalate esters(PAEs) were simultaneously measured by gas chromatography/mass spectrometry. Basically, the average concentrations of the total PAHs, n-alkanes and PAEs in each season remained nearly level, and seasonal variations were little throughout the study period. These results suggest that the emission sources, which are not influenced by the seasons, are the dominant inputs for the target organic compounds. Diagnostic ratios of PAHs, assessment of n-alkane homologue distributions, carbon preference index, and the contribution of wax n-alkanes from plants were used to estimate source apportionments. These results indicate that anthropogenic sources were the main contributor for most PAHs and n-alkanes throughout the study period. The concentrations of PAEs selected in this study were low because emission amounts of these chemicals were little within the source areas of the sampling site. To our knowledge, this study is the first attempt to simultaneously measure a high number of non-polar organic compounds in $PM_{2.5}$ collected from the ambient air of Japan, and the resultant data will provide valuable data and information for environmental researchers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.324-332
• /
• 2017

Objectives: Much scientific evidence indicate a positive association between moldy environments and respiratory illnesses and/or symptoms. However, few comprehensive assessments of mold have been performed for such settings. Spore counts or microscopic enumeration only may not be sufficient for evaluating fungal exposure. Recently, Mold Specific QPCR technology developed by the US EPA (Environmental Relative Moldiness Index, ERMI) has been widely used worldwide and great performance for assessing fungal exposure has been shown. Methods: We aimed to develop a Korean version of ERMI suitable for the distribution of fungal flora in Korea. Thirty dwellings in the Seoul and Incheon area were selected for sampling, and each was classified as 'Flooded, 'Water-damaged' or 'Non-water-damaged'. Results: Dust on the floor and airborne sampling were collected using an MAS100 and a 'Dustream' collector. Samples were analyzed by quantitative polymerase chain reaction(QPCR) for the 36 molds belonging to ERMI. Student t-test and ANOVA tests were carried out using SAS software. The median ERMI values of flooded, water damaged, and non-water damaged dwellings were 8.24(range: -5.6 to 27.9), 5.47(-25. 4 to 32.7), and -15.30(-24.6 to 14.8), respectively. Significant differences were observed between flooded and non-water damaged dwellings (P=0.001) and between water-damaged and non-water damaged dwellings (P=0.032). Conclusion: Our findings indicate that ERMI values attributed to dust samples in Korea could be applicable for the identification of flooded or water damaged buildings. However, much data is needed for continuously developing the Korean version of ERMI values.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.163-173
• /
• 2022

The purpose of this study is to explore risk factors affecting the oral health quality of life of non-medical hospital workers. As for the research method, a survey was conducted on 608 workers at hospitals in the metropolitan area from April 20 to July 30, 2021. As research tools, questions related to work loss, oral health status, and oral health quality of life were investigated. For the analysis methods, independent sample t-test, one-way ANOVA test, and hierarchical regression analysis were performed. As a result of controlling exogenous variables, gender(β=0.108), systemic disease(β=0.136), oral health level(β=0.201), and oral health status(β=0.463) were found to have an effect on the quality of life. Initiating regular oral health education for non-medical hospital workers will be of great help to promote oral health and work.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5419-5424
• /
• 2014

A weld scallop is a small quadrant or half circle type hole installed in the weld line cross area for easy welding operation. Many types of T-bars with a scallop can be welded in a block assembly stage in shipbuilding. The difficulties arise from the fact that scallops are to be filled by build-up welding after welding of the cross line is complete. In this study, a non-scallop block joint welding method was developed using special type CBM (ceramic backing material). The wedge shaped CBM was devised to insert a CBM into just the V groove of weld line cross area without weld scallop. A saw-toothed shape was adopted for easy cutting of the unnecessary part in the CBM fitting process. The applicability of the developed method was verified through welding experiments based on the yard welding conditions.