• 제목/요약/키워드: non-destructive measurement

검색결과 289건 처리시간 0.028초

Assessment of London underground tube tunnels - investigation, monitoring and analysis

  • Wright, Peter
    • Smart Structures and Systems
    • /
    • 제6권3호
    • /
    • pp.239-262
    • /
    • 2010
  • Tube Lines has carried out a "knowledge and investigation programme" on the deep tube tunnels comprising the Jubilee, Northern and Piccadilly lines, as required by the PPP contract with London Underground. Many of the tunnels have been in use for over 100 years, so this assessment was considered essential to the future safe functioning of the system. This programme has involved a number of generic investigations which guide the assessment methodology and the analysis of some 5,000 individual structures. A significant amount of investigation has been carried out, including ultrasonic thickness measurement, detection of brickwork laminations using radar, stress measurement using magnetic techniques, determination of soil parameters using CPT, pressuremeter and laboratory testing, installation of piezometers, material and tunnel segment testing, and trialling of remote photographic techniques for inspection of large tunnels and shafts. Vibrating wire, potentiometer, electro level, optical and fibre-optic monitoring has been used, and laser measurement and laser scanning has been employed to measure tunnel circularity. It is considered that there is scope for considerable improvements in non-destructive testing technology for structural assessment in particular, and some ideas are offered as a "wish-list". Assessment reports have now been produced for all assets forming Tube Lines' deep tube tunnel network. For assets which are non-compliant with London Underground standards, the risk to the operating railway has to be maintained as low as reasonably practicable (ALARP) using enhanced inspection and monitoring, or repair where required. Monitoring techniques have developed greatly during recent years and further advances will continue to support the economic whole life asset management of infrastructure networks.

PLC제어와 영상처리를 이용한 계란의 비파괴 신선도 측정 시스템 개발 (Development of non-destructive freshness measurement system for eggs using PLC control and image processing)

  • 김태정;김선정;이동구;이정호;이영석;황헌;최선
    • 한국정보전자통신기술학회논문지
    • /
    • 제12권2호
    • /
    • pp.162-169
    • /
    • 2019
  • 분광법을 이용한 비파괴 신선도 측정 연구들이 여러 차례 진행되어 왔지만, 기실과 신선도 간의 연구가 진행되지 않았다. 따라서 본 연구에서는 비파괴 방식으로 계란 내부의 기실을 시각적으로 계측하며 정량화하는 시스템을 개발함에 목적이 있다. 소형 챔버로 구성된 실험 환경은 2개의 850nm 대역의 IR 레이저, 2개의 서보모터, IR Cut RGB 카메라로 구성되며 계란 기실의 영상을 획득한다. 본 논문에서 계란의 기실 부피 비율이 2.9% 이하이고 밀도가 0.9800($g/cm^3$) 이상이면 60 이상의 호우 유닛 값을 갖는 B등급 이상의 신선한 계란으로 판단한다. 상기 결과 중량측정용 저울, 비파괴 판정시스템과 신선도 측정 알고리즘이 있으면 계란을 파괴하지 않고 B등급 이상의 판매 가능한 계란을 판정할 수 있음을 의미한다. 향후 계란의 신선도 판정을 할 때 계란의 기실 부피 비율과 밀도를 이용하여 계란 신선도를 비파괴 적으로 판별할 수 있는 기초 자료로 사용할 수 있기를 기대한다.

내장형 분광광도시스템 구성에 따른 조명 영향 평가 (Evaluation of illumination effect for on-board spectrometer system)

  • 이상식;이충호
    • 한국정보전자통신기술학회논문지
    • /
    • 제3권2호
    • /
    • pp.18-24
    • /
    • 2010
  • 본 연구에서는 표준 색차계와의 비교와 색상정보 좌표계 분석법을 이용하여, 비접촉 및 비파괴 측정 장치로 많은 분야에서 사용하고 있는 내장형 분광광도계의 조명 영향을 평가하였다. 본 연구에서 사용한 색상지는 표준 반사물질과 만셀 표준 색상인 빨강, 노랑, 초록, 파랑 색상지를 사용하였다. 표준 색차계 시스템 및 내장형 분광광도계 시스템을 비교 분석하기 위하여, 실험 재료 색상지를 색상지별 20번 측정하였다. 본 연구에서는 비접촉 및 비파괴 검사 장치에 내장형 분광광도계 응용에서 조명을 일정하게 공급하고 캘리브레이션을 정확하게 수행한다면, 조명의 영향을 거의 받지 않는 시스템을 구성할 수가 있을 것으로 판단되었다.

  • PDF

Evaluation of the characteristics of the reflection plate to measure defects in the invisible area using infrared thermography

  • Kim, Sang Chae;Park, Il Cheol;Kang, Chan Geun;Jung, Hyunchul;Chung, Woon Kwan;Kim, Kyeong Suk
    • Nuclear Engineering and Technology
    • /
    • 제52권4호
    • /
    • pp.856-862
    • /
    • 2020
  • Defect inspection system for industrial applications takes the important portion. Non-destructive inspection method has been significantly improved. Infrared thermography, as one of method for non-destructive inspection, can provide relatively precise data and quick inspection time. This study, it was performed to measure defect according to the measurement limit of the non-visible areas such as the back surface of the pipe using reflection plate using reflection plate based on Infrared thermography. The materials of the reflection plate were determined in consideration of the space limitation and the thermal characteristics, and defects were detected by the manufactured reflection plate. Detection of defect in non-visible area using the candidate materials for reflection plate was conducted.

노후아파트 현장에서의 콘크리트 압축강도 추정 (Concrete Compressive Strength Prediction from Deteriorating Apartment Site)

  • 이규동;임홍철;임병호
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
    • /
    • pp.155-158
    • /
    • 2006
  • Deduction of compressive strength in concrete members is very important to decide stability of structures. In this study, we compare the compressive strength of concrete between nondestructive test done to the building which was to be demolished at residential reconstruction site and destructive test of core specimen from the site. The result is more reliable because ore can compare the measurement of nondestructive tell with the result from destructive test using drilled cores. Compressive strength of each material was calculated with the result of rebound number test. In addition, we performed ultrasonic test for another result of compressive strength. And we made a comparative study of compressive strength of concrete drawn from both nondestructive and destructive tests.

  • PDF

접착력의 측정 (Measurement of Adhesion)

  • 김성룡;이호영
    • 접착 및 계면
    • /
    • 제4권3호
    • /
    • pp.21-32
    • /
    • 2003
  • 본 원고에서는 전에 발표된 동반 논문[한국 접착 및 계면학회지, 3권4호(2002)]과 연관된 여러 가지 접착력 측정방법에 관하여 살펴보았다. 먼저 이상적인 접착력 측정방법에 관하여 살펴보았고, 그 다음으로 기계적 방법, 비기계적 방법 그리고 기타 방법의 3가지로 종류의 접착력 측정방법들을 소개하였다.

  • PDF

충격반향기법의 주파수영역 해석을 이용한 구조물 안전진단에 관한 연구 (A Study of Structural Safety Diagnosis using Frequency Domain Analysis of Impact-Echo Method)

  • 안제훈;서백수
    • 터널과지하공간
    • /
    • 제14권1호
    • /
    • pp.35-42
    • /
    • 2004
  • 충격반향기법은 콘크리트 구조물 내부의 결함과 외부 표면 사이에서 반사되어 전락되는 충격생성응력파를 이용한 비파괴적 시험 방법이다. 본 연구에서, 토목 및 건축 구조물의 안전진단을 위하여 충격반향기법을 이용한 비파괴 시험을 수행하였다. 야외 시험 조건은, 터널라이닝 모델에 대한 주파수 영역에서, 모델의 두께 변화를 측정할 수 있는 경우와 모델 내 공동이 있는 경우의 공동의 위치를 파악하는 경우, 그리고 터널라이닝 조건에서의 라이닝 두께 및 공동위치를 파악하는 경우를 시험하였다.

Development of a DDA+PGA-combined non-destructive active interrogation system in "Active-N"

  • Kazuyoshi Furutaka;Akira Ohzu;Yosuke Toh
    • Nuclear Engineering and Technology
    • /
    • 제55권11호
    • /
    • pp.4002-4018
    • /
    • 2023
  • An integrated neutron interrogation system has been developed for non-destructive assay of highly-radioactive special nuclear materials, to accumulate knowledge of the method through developing and using it. The system combines a differential die-away (DDA) measurement system for the quantification of nuclear materials and a prompt gamma-ray analysis (PGA) system for the detection of neutron poisons which disturb the DDA measurements; a common D-T neutron generator is used. A special care has been taken for the selection of materials to reduce the background gamma rays produced by the interrogation neutrons. A series of measurements were performed to test the basic performance of the system. The results show that the DDA system can quantify plutonium of as small as 20 mg and it is not affected by intense neutron background up to 1.57 × 107 s-1 and gamma ray of 4.43 × 1010 s-1. The gamma-ray background counting rate at the PGA detector was reduced down to 3.9 × 103 s-1 even with the use of the D-T neutron generator. The test measurements show that the PGA system is capable of detecting 0.783 g of boron and about 86.8 g of gadolinium in 30 min.

X-밴드 주파수의 마이크로파를 이용한 자유공간에서의 모래수분측정 (Sand Moisture Measurement with Microwave Technique in Free Space at X-Band Frequency)

  • 남현수;성재용;박남석
    • 한국전자파학회논문지
    • /
    • 제8권5호
    • /
    • pp.525-533
    • /
    • 1997
  • 건축연구에서의 수분측정 방법을 개선하기 위하여 비파괴적인 수분측정기술을 응용하였다. 본 실험은 연속적이고 비파괴적인 측정에서의 핵심요소로서 자유공간에서의 혼 안테나를 사용하여 실험하였으며 사용한 기술은 마이크로파 브릿지 장치로서 9.5GHz의 주파수에서 함수율이 1~12% 범위의 모래수분을 측정하였다. 이로부터 대표적인 교정곡선을 구하였다. 이를 바탕으로 마이크로파를 이용한 석탄, 제지, 식품 미치 건축재료 등과 같은 비금속내의 수분측정이 가능함을 보였다.

  • PDF

색정보를 이용한 3차원 형상 측정 (The shape measurement of three-dimensional object by using color-coded information)

  • 김정식;송창규;주병권;홍준희
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.1446-1449
    • /
    • 2005
  • The purpose of this study is the real-time shape measurement of three-dimensional object by using color coded information. The paper relates to non-contact optical measurements of surface profiles or displacements, because of optical measurement systems are advantageous over using mechanical sensing, their relatively high speed and non-destructive capabilities. Therefore is particularly useful for three dimensional sensing which requires high horizontal and vertical resolution of measurements over a wide range thereof. Each a red, blue, green by using a inherence colors of hue value are good point.

  • PDF