• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.41-48
• /
• 2011

The wettabilities of the partially fluorinated polymers (ethylene-tetrafluoroethylene copolymer (ETFE), ethylenechlorotrifluoroethylene copolymer (ECTFE), and poly(vinylidene fluoride) (PVDF)) were investigated by contact angle measurements. Zisman plots for ETFE and ECTFE exhibited linear relationships, while the Zisman plot for PVDF showed a slight curvature, which was interpreted to indicate strong non-dispersive interactions between the surface and the contacting liquids. The Lifshitz-van der Waals forces of the fluoropolymers were estimated to increase in the order of ETFE < PVDF $\ll$ ECTFE. An evaluation of the polar or "acid-base" interaction energies showed that PVDF, which possesses the most acidic hydrogens among the examined fluoropolymers, has the strongest acid-base interactions.

• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.65-71
• /
• 2002

In this paper, an experiment for the active vibration control of a cantilever beam uses electromagnet as an actuator and uses a laser sensor to measure the position of the bending beam, constituting a non-contacting control system. A mathematical model of the overall system is derived to analytically design an appropriate controller. Dynamic equations of the electromagnetic actuator and the beam are combined to find the transfer function from the actuator to the sensor. The effectiveness of the obtained model is verified by various experiments and an improper PID controller is designed based on the obtained model. According to analysis, the coefficient of the derivative controller is the most important parameter for handling the performance and the stability margin of the control system. The experimental results of the active control system are compared with those of the open loop system.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.143-146
• /
• 2004

Fiber reinforced plastic material should be inspected in fabrication process in order to enhance quality by prevent defects such as delamination and void. Generally, ultrasonic technique is widely used to evaluate FRP. In conventional ultrasonic techniques, transducer should be contacted on FRP. However, conventional contacting method could not be applied in fabrication process and novel non-contact evaluating technique was required. Laser-based ultrasonic technique was tried to evaluate FRP plate. Laser-based ultrasonic waves propagated on CFRP were received with various transducers such as accelerometer and AE sensor in order to evaluated the properties of waves due to the variation of frequency. Velocities of laser-based ultrasonic waves were evaluated for various fiber orientation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.458-461
• /
• 2008

We carry out non-steady state finite element simulation of a porthole extrusion process for manufacturing a radiation pipe under isothermal assumption. It is assumed that welding takes place at the moment that the material contacts the plane of symmetry. Welding phenomena are revealed by observing the contacting mechanism of the material passed through the portholes. It is emphasized that mesh density control and intelligent remeshing during welding process govern the solution accuracy and the program applicability. AFDEX 3D is employed.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.2
• /
• pp.65-73
• /
• 1990

Speckle photography is a simple non-contacting method for analysing surface displacement. In its basic form, the object to be studied is illuminated with a beam of laser light from any convenient direction, and a double exposure photography of the surface recorded on the fine-grain film, the object is undergone the displacement to be measured between exposures. Like this, it allows the strain field to be evaluated in two dimensions. A direct experimental comparison of speckle photography with theoretical value on a notched tensile test specimen showed that serious errors could, however, occur due to local surface tilting and due to aberra- tions of the imaging lens. Methods of minimising these effects and those of the speckle de-correlation which occurs by the various conditions are discussed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.187-188
• /
• 2002

Rubber has large differences in elastic characteristics from the other solid materials such as metals. Firstly, the rubber exhibits considerably large elastic compliance. Second is highly non-linear elasticity in which the compliance decreases with increase in strain. The main objective in this research is to reveal the dependence of rubber friction upon these elastic characteristics of the rubber in detail. A super elastic FEM analysis is carried out with using an elastic property of practical rubber. From the calculated result, it is cleared that the rubber makes large real contacting area easier than the metals.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.118-125
• /
• 1997

Non-contacting optical microscopes are increasingly used in recent industrial applications of probes for coordinate measuring machines. They have been found more efficient than conventional touch trigger porbes with ball tips especially in inspecting small-sized objects. There are two major factors affecting measuring accuracy: (1) geometric relations between coordinate systems, (2) magnification ratios of a microscope. In order to determine the magnification ratios exactly, optical imaging of edge was theroretically analyzed and practically adopted to image processing for edge detection. In addition, this paper proposes a geometric calibration method to obtain exact coordinates of measured points from the relations between the machine coordinate system and the image. In the method, the error according to the squareness between the machine axises was also removed. The method was practically adopted to a real coordinate measuring machine. An ultraprecision measurement of 0.2 um uncertainty can be practically achieved.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.353-361
• /
• 2014

This study was confirmed nurse's traditional, social, professional and personal image of the dimensional perception of the difference between the majors and non-majors students exist? and Reflected on the role of the media image of nurses are there differences in perception? and Nurses and nurse related information, and information on contacting the media and contacted the media image of the existing research results and is there a difference? For the purpose, we survey the nursing majors and non-majors students. The results follows. First, the traditional nurses, social, professional and personal image perception gap is high. Second, the media reflected the image of the nurse in charge of the secondary role of a doctor about the image is high. Third, the nurse contacted the media about the TV is very high. The results of this study have implications to enable communication between patients and nurses agree that will provide evidence. In particular, the nurses through the use of media(PPL and Publicity strategy) suggest ways to improve the image.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.1
• /
• pp.53-58
• /
• 2002

New nondestructive inspection (NDI) technique to detect the defect in metal was developed in which an electromagnetic field is induced in a metal by AC current flowing in the magnetic coil and the leak magnetic-flux disturbed by defects is measured using a tape-recorder head with air gap. This technique can be applied in evaluating the location and sizing of surface defects in components of the ferromagnetic body by means of the non-contacting measurement. In this paper, we have applied this technique to the evaluation of two-dimensional surface cracks in ferromagnetic metal, and also investigated the influence of the various frequencies and lift-off. Defects were detected with maximum values in the distribution of voltage and it was found that the maximum values tend to increase with the defect depth. Although the maximum values for defects are affected by the frequency and lift-off, the depth of small defects can be estimated from the linear relationship between the depth and voltage rate$(V_0/V_{ave})$.

• Parasites, Hosts and Diseases
• /
• v.60 no.1
• /
• pp.51-56
• /
• 2022

Global efforts to identify groups at high risk for schistosomiasis have mainly concentrated on identifying their geographical distribution. Investigations on the socioeconomic characteristics of high-risk groups are relatively scarce. This study aimed to explore the associations between schistosomiasis among students and their parents' occupations. A nationwide cross-sectional survey was conducted targeting 105,167 students in 1,772 primary schools across Sudan in 2017. From these students, 100,726 urine and 96,634 stool samples were collected to test for Schistosoma haematobium and S. mansoni infection. A multi-level mixed effect analysis was used with age and sex as fixed factors, and school as a random factor. The odd ratios (ORs) of practicing open defecation among farmers' children were almost 5 times higher than their counterparts whose parents were government officials (OR=4.97, 95% confidence intervals (CIs): 4.57-5.42, P<0.001). The ORs of contacting water bodies for watering livestock among farmers' children were more than 4 times higher than those of children whose parents were government officials (OR=4.59, 95% CIs: 4.02-5.24, P<0.001). This study shows that schistosomiasis represents a disease of poverty and that farmers' children constituted a high-risk group.